Question about Dodge Durango

1 Answer

MY 1998 DODGE DURANGO KEEPS STALLING. THE CHECK ENGINE LIGHT IS NOT ON. WHAT COULD BE THE PROBLEM?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 137 Answers

Weird, if it continually stalls the OBD2 system should set a code.
Fisrt check to see if the check engine light is functioning. With the vehicle off place the key in the ignition and turn to the RUN position but do not start. Does the check engine light come on? If not, the bulb is out and there is a most likely a code tripped. The check engine light is just not working.

I'm betting there is a code or shortly will be a code and suggest you scan it before trying to daignose the issue too much further. It could be any number of problems. It could be anything from a fuel related issue, to ignition, to a sensor, to the computer itself, and cracked part, leaking gasket, faulty injector, and so on.

Posted on Oct 06, 2010

Testimonial: "THANK YOU VERY MUCH!!!! THIS HELPS!!!"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1998 dodge durango slt wont drive past 40 miles an hour


Hello Jeff Winner,

Over the last 20 years ... cars have has a LIMITED OPERATION FEATURE added... When the engine READS something that is not IMMEDIATELY catastrophic... it will allow you to
LIMP home... rather than a complete shut down.

Limp mode:
You SHOULD also have a CHECK ENGINE light... (?)

My best advice is to limp on down to your near-by FREE code reading shop... and have a READER tell you what CODES are registered...

A blocked exhaust system will also seriously SLOW your progress
((soon to stop all-together)).

Hope this helps

Check you exhaust prices BEFORE you go...!!

http://www.rockauto.com/en/catalog/dodge,1998,durango,5.9l+v8,1314473,exhaust 1998 DODGE DURANGO 5 9L V8 Catalytic Converter RockAuto

1998 DODGE DURANGO 5 9L V8 Muffler RockAuto

Nov 27, 2016 | 1998 Dodge Durango

1 Answer

I have 1998 dodge Durango bad motor what motor is interchangeable with it from another


CHECK THE 7TH DIGIT ON THE VIN CODE. MUST BE THAT CODE ENGINE OTHERWISE CHECK ENGINE LIGHT WILL NEVER GO OFF. MAY BE A 3.9L V6.

Mar 01, 2015 | 1998 Dodge Durango

1 Answer

My2000 dodge durango keeps stalling at red lights help


is the check engine light on....is it throwing out a code....put it on a code reader and see what it reads and then you will have some idea of why this is happening...

May 19, 2014 | 2000 Dodge Durango

1 Answer

2009 dodge durango will not stay running


CAn you describe the problem with a little more detail. Does it start and run for a while before it stalls. Does it start and then stall right away. Is there a pattern to the stalling, turning, going over bumps, coming to a stop, trying to accelerate?

what engine do you have?

is the check engine light on?

Apr 18, 2014 | 2005 Dodge Durango

1 Answer

1998 dodge durango owners manual


is the check engine light on now,but it not showing. you have to remove the insturment cluster. there is four screws holding the cluster in

Dec 03, 2012 | Cars & Trucks

1 Answer

00 Dodge Durango keeps stalling, getting no bus signal and transmission light


had the same issue 4months ago, it end up being the pcm, i hve a 2000 dodge durango as well

Aug 25, 2012 | 2000 Dodge Durango

1 Answer

My 1998 Dodge Intrepid is starting & then stalling only after a few seconds. The engine light came on, & the code was P1391. Any ideas?


That code is indicating an intermittant crank shaft or cam shaft sensor fault. Because the engine is starting then stalling, check to see if you have spark after the stall. If spark is still present, you are probobley looking at a cam sensor circuit issue. The cam sensor controls the fuel injector pulse. If the cam sensor fails on a chrysler product, the fuel injectors will not function.

Nov 25, 2011 | 1998 Dodge Intrepid

1 Answer

The check engine light just came on while driving on my 1998 dodge durango what could this mean?


could mean anything at this point. just get gas? maybe cap not on tight.
advance auto or autozone will scan for free

May 20, 2011 | 1998 Dodge Durango

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

460 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...