Question about 2002 Jaguar X-Type

Open Question

I have a 2002 2.5 Jaguar X-type (Auto). The (engine malfunction) lamp sometimes illuminates. Had it diagnosed and it reads "faulty Knock Sensor." Secondly, the (powertrain malfunction) lights on full throttle. This causes my jag to run irrationally. Sudden power loss to throttle (engine now rev higher), gear change is not define. Light goes off and car drives normally when I restart engine. Please help!!!!!!

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: jaguar x-type 2002 2.5L

most likely the ran it up on the lift and that triggers all these. you should be able to bring it any local garage and they should clear it. 

Posted on Sep 11, 2008

ddismuke04
  • 2 Answers

SOURCE: I also started getting a warning light today 'powertrain malfunction' on my 2002 Jaguar x-type

You might have to change the shift cable. I had the problem last year (2007), worked perfectly after that......:)

Posted on Oct 04, 2008

  • 1 Answer

SOURCE: 02 JAGUAR X-TYPE PLEASE HELP

BEFORE YOU GO AND SPEND THE MONEY AN A KNOCK SENSOR I WOULD GO AND GET A FUEL PRESSURE TEST. IF YOU ARE LUCKY IT MAY BE STARVING FOR FUEL AND COULD BE AS SIMPLE AS A FUEL FILTER

Posted on Jan 29, 2009

localwonder
  • 6784 Answers

SOURCE: throttle Pedal Position Sensor Switch A

its just a sensor. you do not have to replace the entire throttle body.

Posted on Mar 16, 2009

  • 420 Answers

SOURCE: Jaguar S-type (2000 auto) gearbox fault when on motorway

It sounds like the tranny is over heating, you might want to have the tranny check by a pro. Way to complex to work on with out experience and training.

Posted on Jun 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Check for short/ open circuit for knock sensor 52 code as checked by Auto Electrician


The knock sensor can't be tested out of the engine, you must run the engine and watch the signal return and then look up what is normal and decide if the sensor is defective.

Jun 25, 2016 | Cars & Trucks

1 Answer

I have 03 jaguar s-type with engine symbol and dash reads restricted performance


You need to go and have any fault codes diagnosed. The jag dealership is probably the best option.

The symptoms you describe could be attributed to a faulty oxygen sensor or blocked catalytic converter

May 17, 2016 | Jaguar Cars & Trucks

1 Answer

What makes a 2002 jaguar x type 3.0 to read engine system fault fail and gearbox fault


you need to get the fault codes out of the engine control module and the transmission control module ie ecm and tcm with a eobd fault code reader to help sort this one . common probs are faulty jatco auto gearbox (rubbissh gearbox) poss engine managment sensor failures or even a broken/corroded wire or connector, good luck,.

Mar 05, 2016 | Jaguar Cars & Trucks

1 Answer

Why is error code p0327


Code P0327 indicates that the readings from the #1 Knock Sensor circuit are too low, is outside of its operational window and malfunctioning. Symptoms
  • Check Engine Light will illuminate
  • Engine pings on accelration
  • Engine may be running hotter or colder than normal
  • In rare cases, the engine may not exhibit noticeable symptoms
Common Problems That Trigger the P0327 Code
  • Defective Knock Sensor
  • Defective Knock Sensor Circuit or connections
  • Defective EGR System
  • Malfunctioning Cooling System
  • Rich air/fuel ratio
Common Misdiagnosis
  • Knock Sensor replaced when cause of code P0327 was a cooling system problem
  • Knock Sensor replaced when cause of code P0327 was an EGR system malfunction

Sep 28, 2015 | 2005 Suzuki Forenza

1 Answer

Is it harmfull to run with a PO105 oroblem


P0105 Manifold Absolute Pressure/Barometric Pressure Circuit Malfunction,

Symptoms of a P0105 check engine light code may include:

  • Poor running engine
  • Engine runs rich
  • Engine won't idle
  • Engine backfires through tailpipe
  • Engine misfire under load or at idle
  • MIL (Malfunction Indicator Lamp) illumination
  • In some extreme cases there may be no symptoms other than MIL illumination, could be caused by:
    • MAP sensor vacuum hose disconnected or plugged
    • Bad MAP sensor
    • Bad TPS good-day !

Apr 07, 2012 | Jaguar XKR Cars & Trucks

1 Answer

Where is my knock sensor bank 2 located at on my jaguar x-type? (2002, 2.5 cylinder v6)


There are two knock sensors located on top of the Engine, approximately in the middle of the 4 cylinders at each bank.
To get access to the sensors the black plastic engine cover with the "Jaguar V8" imprinted on has to be removed.

There are two types of knock sensors.
The "old" ones that are of a "screw-in barrel type" and the newer ones that are just bolted on.

I describe the replacement of the bolt-on type knock sensor on Bank 2 in the following documentation on a 1999 XJ8 AJ27 engine.

Be careful!
Knock sensors are piezo electric devices that are very sensitive! If dropped, over-torqued or struck they will probably be destroyed.
As knock sensors are sensitive to a sudden temperature change they are also easily fractured by steam blasting a hot engine.
So handle the knock sensors with great care and let the engine always cool before fitting a new sensor!

Feb 20, 2012 | 2002 Jaguar X-Type

1 Answer

Hi, I have a Jaguar x-type 2.0 v6 2002, and i stalled it and quickly turned the engine back on, then the malfunction indicator lamp came on and won't go off. The car runs perfectly but this light...


Hi,
The light coming on is an indication of a malfunction in the engine management system.
The cars computer has now stored a malfunction code, turning on the light. A parts store as Auto Zone or a Jag dealer can scan the computer with a "code scanner". Many parts stores will do this for free.
The code scanner will give the reason why the light went on. This aids the mechanic of your choice in the repair.
You need to find a place to scan the computer. Although the car runs good the light is a warning that something is amiss.
Wayne

Aug 30, 2011 | 2002 Jaguar X-Type

1 Answer

My S-type will sometime read restricted performance,ABS brake, engine fault,air bag and the engine light will be on dash bored-the car will not exceed over 15mph-if vehicle is park for 15 min of longer-...


its sounds like its between the oxygen sensor..and your throttle body sensor..Normally the difference between the oxygen sensor it will display all these things except the dsc mil.Make sure that you dont wash the engine caompartment near the firewall,this can lead to water getting into the TBS and cause the sensor to go bad,and also near the MAF in the air cleaner elbow.Water can short this sensor.But intermitant restricted performance can show do to a knock sensor malfunction also it will code p0327 or the oxygen sensor.Go by Antozone let them scan the car for codes and freeze frame data.The Actron obdii scanner does well with Jaguars.

Aug 05, 2011 | 2003 Jaguar S-Type

1 Answer

I get the OBD-II codes of P0325 and P0326. I did a search and I found this site http://www.obd-codes.com/p0325 which explains about the knock sensor circuit malfunction. Is the knock sensor, which I read...


Your local auto parts store, or auto parts superstore should have it, if not, be able to order it. Ex.--Advance Auto Parts store has a BWD Knock Sensor, #S8815, for around $50.00. 2002 Kia Rio 1.5L/L4/FI

Apr 02, 2010 | 2002 Kia Rio

2 Answers

Engine cuts out and shudders at 3000 rpm won't accelerateobd code p0332 2002 jaguar x type 3.0 l


P0332 - Knock Sensor 2 Circuit Low Input (Bank 2)

This sensor signals the engine-control computer when detonation is detected, momentarily retarding ignition timing until detonation ceases.

Most computer-controlled systems use knock sensors to ****** timing when the engine is experiencing pinging or knocking.


Obviously, a faulty knock sensor produces problems that appear to be ignition-system-related. If the knock sensor system does not provide an engine detonation signal to the PCM (powertrain control module), the engine detonates, especially on acceleration.
  • The first step in diagnosing the knock sensor and knock sensor module is to check all the wires and connections in the system for loose connections, corroded terminals, and damage.
  • With the ignition switch on, be sure that 12 volts are being supplied through the fuse to the knock sensor module.
  • A quick check of a knock sensor is to watch the ignition's timing while the engine is running and the engine block is tapped with a hammer.
    • The noise should cause a change in timing.
  • The knock sensor can also be checked by tapping near the sensor and watching for an AC pulse on a DMM or lab scope.
16bb5a3.jpg

May 01, 2009 | 2002 Jaguar X-Type

Not finding what you are looking for?
2002 Jaguar X-Type Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...