Question about 1995 Eagle Talon

2 Answers

I was wondering instead of buying the K&N air filter cleaner kit. Is there anything else you could use to clean an air filter,maybe things one would have at home....... thank you !

Posted by on

  • anavar99 Oct 06, 2010

    thanks alot !!!! aprriciate it !

  • anavar99 Oct 06, 2010

    How would that help ??? im asking what other products could be used lmao
    and if i mentioned the K



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 8,197 Answers

I always used dish washing liquid.let it soak in the sink for a few min...then swish it around ..they say it cuts grease..then rinse from inside out just flick it around to dry it off for a min or so then put back dry...thay have filter spray oil if it makes you feel better ... oil dont hurt thats for sure i just never bothered with it

Good Luck please accep the answer and please leave a testimonial

Posted on Oct 06, 2010

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

First of all if you do not have a K&N type airfilter then there is no point in using that kit, but if you have a K&N type filter that is the best way to clean. Hope this helps

Posted on Oct 06, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 2003 Astro van has been running fine the I got gasmonday night and as I pulled out the gas station it spit and sputtered like I got bad gas or trash in filter, then it started working fine.

Mass air flow sensor maybe drity or going bad . Ever had it replaced ? Have you replaced the air filter lately ? Video's on youtube showing how to clean mass air flow sensor , you would have to buy a can of mass air flow sensor cleaner . Also while your at it clean the throttle plate , again there are videos on youtube . How did you check fuel pump ? To do it right you would need to hook up a pressure gauge . Also check flow .Videos on youtube .Has the check engine light come on ? Also you mite try some fuel injector cleaner and or dry gas for moisture in the fuel !

Mar 15, 2017 | Cars & Trucks

1 Answer

Yes, I have a mazda 323 1988. & it starts & idles fine, but when I press the accelarater it dies. I was wondering if u might have a clue on what might be causing that to happen

Mr. Barnett, is it carb. or injection. If it is carb possible you do have a dirt inside the car where you surely need a mechanic to inspect and clean. If your vehicle is injection then are the following :1. either the throttle body is dirty on throttle and needs cleaning, 2. probably the air flow meter is faulty or dirty, 3. the fuel pressure on acceleration is not sufficient,4. fuel filter is nearly logged. Ask for a mechanic to help you is better instead you try to if you do not know many things about mechanics.

Jun 22, 2014 | 1988 Mazda 323 Hatchback

1 Answer

Mazda b3000 3.0L is throwing code p0113 and p0102This started after I put on k & n old air intake kit. It will not go past 80 mph and starts to act like it isn't getting fuel or a plug is fouled. It...

K & N is the number one killer of mass air flow sensors the oil gets burnt onto the fine wire and takes several cleanings to remove this film and the best sensor cleaner just aint good enough for one cleaning.

May 01, 2014 | Mazda Cars & Trucks

1 Answer

Why would installing a K & N CAI kit cause check engine light to come on

Po113 is the air temp code it was not transferred from old air cleaner po102 is a air flow code set from over oiling the new filter. the engine still will never rev over 3,000 rpms due built in rev limiter to stop over reving with no load.

Apr 30, 2014 | 2005 Mazda B3000 Cab

1 Answer


In the plastic air ducting between the air filter
& throttle body

Buy CRC MAF Cleaner-instructions on back of can

Mar 08, 2013 | Cars & Trucks

1 Answer

1999 mitsubishi eclipse hard to start

idling is the the idler valve on the intake usually just needs a clean. as for no power this can be the throttle sensor, if the throttle has blank spots it would cause this problem. if the fuel filter has not been changed in a long time it could need changing, especially if not in the last 5 years., air filter could also need changing if this has not been done for a long time. remove the air filter and check its color if its completely black change it, this can also contaminate the maf sensor, this you can clean with MAF sensor cleaner its best to clean this as it will cause engine problems such as you have. so as to conform do these first.

1. check air filter.
2. clean the idle valve.
3. clean the MAF sensor.
do these 3 first before anything ells.

Jul 10, 2017 | 1999 Mitsubishi Eclipse

1 Answer

Code P0102 shows up indicates Mass Air Flow Sensor. 1998 Olds Intrigue. It is like it has the hiccups and dies when slowing down and coming to a stop. Is replacing the Mass Air Flow Sensor likely going to...

Try this first. You can buy some MAF cleaner( not carb cleaner) and try to clean it off. Let it dry completely and don't probe the sensor with anything but spray from the cleaner. Change the air filter with a quality filter; the cheaper ones leave deposits on the sensor.

Aug 12, 2011 | 1998 Oldsmobile Intrigue

1 Answer

When driving the SUV has a hesitation or pulls. I was wondering if it could be my fuel filter or maybe a sensor for the air intake how do I diagnose to see which one it could be? Or could it be something...

Not the fuel filter,unless it has been on the vehicle ten years,and is totally clogged. It filters fuel,nothing else!
Clean the MAF Sensor with --CRC MAF Cleaner
Could be other things--spark plugs,egr valve,vacuum leaks

Nov 04, 2010 | 2003 Ford Expedition

1 Answer

My ford truck failed the smog test because bank 1 and 2 are to lean ( p0171 & p0174 )

possible solutions are, a dirty maf sensor. remove manifold air flow sensor and clean it with maf sensor cleaner. you can buy a can at any auto parts store to clean, take off and clean maf sensor, do not touch inside of sensor it is very fragil. when cleaning sensor be sure it is dry before installing it back on vehicle. also check for a vacuum hose leak downstream of maf sensor.make sure air filter is clean. this usually takes care of the problem. po171 and po174 are the same. you can use electrical cleaner to clean sensor also. also check for a dirty fuel filter and fuel pressure, if needbe.

Feb 11, 2010 | 1998 Ford Taurus

3 Answers

1996 Toyota Camry sporadicallystalling out when I come to a stop.

take your car to a parts supply store and ask them to use the diagnostic scan tool. Sounds like it could be the map, maf, or the tps. at a minium take the throttle body off and clean in or take your air cleaner off and spray some cleaner in the body while the engine is running.

Aug 08, 2009 | 1996 Toyota Camry

Not finding what you are looking for?
1995 Eagle Talon Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eagle Experts


Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Stewart Dibbs

Level 2 Expert

322 Answers

Are you an Eagle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides