Question about Mazda Protege
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The book is wrong on each cam gear there are two sets of marks "notches align them facing each other in the center of head nevermind "I" and "E" if correct you'll have both of them making one line in the center of both pulleys and the other set of notches will be 45 degrees below. I found this out the hard way just finished with mine for info and tips on mechanics and parts for your ride visit my site at www.godspeedmotorsportsonline.com
Posted on Jan 25, 2009
Mazda vehicles used both vacuum actuated and electric stepper motor type cruise control systems. The actuator, located in the engine compartment, will have a vacuum line and electrical wires connected to it if it is a vacuum model. Electric stepper motor type units will have no vacuum line connected to the actuator.
Posted on Jun 23, 2009
The Code you refer to is P0705 Transmission Range Sensor Circuit malfunction (PRNDL Input). It is a possiblility that because this code is present, this sensor is malfunctioning. If it is malfunctioning, that means the engine needs to "guess" the value that this sensor is responsible for. In most cases when this happens, the engine will go for a value that ensures the car runs. The engine will not try to run smooth or efficently, it will only try to run. It is my guess that if you have the sensor checked and replaced, the problem might be fixed. Please let me know if this answers your question and please rate my response. Thank you
Posted on Apr 09, 2010
Testimonial: "that is good. where is the trasmission range sensor circuit located "
A 2001 Mazda Protege (actually, all models from 1999-2003 including the DX, LX, ES, Mazdaspeed, and Protege 5) does not have an inline fuel filter. The only fuel filter it has is a "strainer" or a "screen", which looks like a nylon mesh "sock". This strainer is connected to the fuel pump, located in the gas tank. Although this fuel strainer does not require periodic replacement, it is recommended that it be changed if you are replacing the fuel pump.
Posted on Jun 15, 2010
Tips for a great answer:
Oct 30, 2015 | 2002 Mazda Protege
Jun 22, 2014 | 1995 Mazda Protege
Nov 01, 2010 | Mazda Protege Cars & Trucks
Aug 29, 2009 | 1996 Mazda Protege
Jun 26, 2009 | 1999 Mazda Protege
Apr 18, 2009 | Mazda Protege Cars & Trucks
Mar 30, 2009 | 1990 Mazda Protege
51 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: