Question about Geo Metro

1 Answer

How do you replace a throw out bearing - Metro Geo Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 52 Answers

You have to drop the transmission. The throw out bearing is going to be located at the center of the pressure plate (on the opposite side as the clutch)

Posted on Oct 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1994Dode stealth keeps dieng when I put on th brakes n my clutch throw out bearing is makeing a sqiulling sound when my clutch is disengaged all started at th same time it drives fine only dies when I...


engine dying when the foot is on the brakes indicates a faulty brake booster loosing vacuum
The throw out bearing will have to be replaced before it damages the pressure plate fingers.
replacing part of a clutch is a total waste of money as now you have to spend more money fixing what should have been replace d last time. Clutches should be replaced as a kit which includes the throw out bearing.

Feb 01, 2015 | Cars & Trucks

1 Answer

How do i fix my 93 dodge stealth 5 speed it jumps out of 4th an 5th gear


It sounds like its the "throw-out bearing", usually the clutch, pressure plate, and throw-out bearing are all replaced together. A lot of Transmission shops will give you a free "road test" and they can confirm if the throw-out bearing needs replaced.

Jan 08, 2015 | Dodge Cars & Trucks

1 Answer

1994 nissan pickup throw out bearing


Is it noisy? like singing or whistling when the clutch pedal is pressed? To replace it, you will have to pull the transmission off, so might as well get a new clutch pack. It will have a new clutch disc, pressure plate, and clutch release bearing -AKA throw-out bearing.
A separate throw-out bearing is about $30, a new clutch pack is about $150. You wouldn't want to replace the bearing, and then have to do it all over again to replace the clutch.

May 03, 2014 | 1994 Nissan Pathfinder

1 Answer

I cant get the throw out bearing out


try n use Q20 then if you fail *** back 2 me i ll give you another idea

Oct 23, 2012 | 1993 Dodge Dakota

1 Answer

My throw out bearins went bad can i just replace them


Throw out bearing? Do you mean the clutch release bearing, aka throw-out bearing? There is only one in a clutch system, and, yes, they can be replaced, without replacing the cluytch disc or the pressure plate. But if it is making noise, it is good practice to do the whole clutch replacement while the transmission is removed. If your budget won't allow that, at least check the clutch friction plates for wear.

Mar 18, 2012 | Cars & Trucks

3 Answers

When I press the clutch in my 99 Rodeo, there is this horrible noise. What is the problem?


if the noise is only there when you push down the clutch, you need to replace the throw out bearing.

Apr 02, 2011 | Isuzu Rodeo Cars & Trucks

1 Answer

On2nd clutch 08 wrangler 1st one replaced @ 9000 mi.s throw out bearing makes noise again


I hope when the first clutch was replaced the throw out bearing was replaced. It sounds like you are either riding the clutch (foot resting on clutch pedal and partially depressing the clutch during normal driving) or the adjustment is incorrect. The throwout bearing should not contact the pressure plate unless the clutch pedal is depressed when adjusted correctly. The constant contact is what wears the bearing out prematurely.

Dec 31, 2010 | 2008 Jeep Wrangler

1 Answer

How to fix noisy throw out bearing


Remove gearbox Fit new bearing Check clutch while you have gearbox out Renew if necessary Replace gearbox Easy! Have fun

Oct 22, 2009 | Cars & Trucks

1 Answer

Throw out bearing


the throw out bearing should pull off and slide the new one on.feel free to contack me any time .i know these truck inside and out i owen a 92 mazda 2600i 4x4 ok good luck . mbill223

Nov 29, 2008 | 1998 Mazda Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Mike Gilbreath

Level 1 Expert

50 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...