Question about 2000 Plymouth Grand Voyager

1 Answer

Water running out at rear of motor - 2000 Plymouth Grand Voyager

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 491 Answers

It could be a bad cooling or heater hose.
Don't let the level of coolant get to low, and toast the motor.
Could be an easy fix, but you need to get a mechanic to check it out.
If taking pressure of the system by unlatching the radiator cap a notch
to take the pressure of the system, may help slow down the leak
and let you drive it without leaking, but in hot weather it would cause an overheat problem.

Posted on Oct 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the rear wiper pump and motor located?


I think you probably meant you want to know where the rear screen washer pump is located?

Older vehicles usually used a rear mounted screenwash pump and reservoir that was completely separate from the front but for a decade or more most manufacturers use a common front-mounted screenwash reservoir with a long tube to supply the rear washer jet.
The pump is invariably mounted at the front, low down and close to the reservoir so as long as there is water present in the reservoir the pump will immediately provide pressure; there is limited drain-back and the pump can't be run dry.

Sometimes there is a single pump and an arrangement of valves and the pump runs in reverse to provide water for the rear and forward to wash the front screen and sometimes there are two pumps with conventional supply and tube arrangements.

Aug 10, 2015 | Cars & Trucks

1 Answer

Wash wipe only working on rear window no water comes out of frot. what can i do? 306 1998 model.


If there is no water coming out, and the reservoir is full, then check the plastic lines that run along the bottom most part of the hood (inside of hood near windshield) to ensure the line has not come loose anywhere, has any holes, or has broken.
Also, run the sprayer and hear for the motor running. If it is, then check the resevoir where the motor (should be) and make sure the wiring is not loose there as well. Last, check the sprayers themselves...they may be plugged - if so, if the reservoir is not full, put some hot tap water in it (empty if full, and fill with hot {not boiling} tap water. Then run the motor intermittently (no more than 15 seconds at a time), as you can burn up the motor if run for long periods of time. If they are clogged, this will help clear them out (consider using a dish soap as well such as Dawn (preferred) as it will also help break through the clogged areas.
Please let me know if you need further assistance.
carsandcomps,
Guru, Premium Expert, Phone Support, Live Chat @ Fixya.com

Jun 29, 2011 | Peugeot 405 Cars & Trucks

1 Answer

'95 Ford Crown VIctoria left rear door motor runs but window will not go up and down.


It sounds like the power window motor is still running but you have a problem with the regulator arm. If you remove the door trim panel and water shield you can have a look to see where it has been disconnected from the motor or if the regulator arm itself is broken.

Feb 21, 2011 | 1995 Ford Crown Victoria

1 Answer

The rear window wiper and window water spray will not turn off


This sounds like a bad switch, try dissconnecting the switch for the rear wipers and see if it stops if it does then replace the switch, the motor is pretty get and dry if it runs and the sprayers spray then it sounds like the switch is stuck or bad.start there,

Jul 20, 2010 | 1990 Plymouth Voyager

3 Answers

Water pump or head gasket


If you can see water pouring from the front and the rear of the engine/cylinder head then I would suspect a head gasket. However, why not remove those components which will allow you to fully inspect the water pump first as the chances are that you would also have to remove these items to remove and repair the head gasket. You may also find water in the engine oil or water in the cylinders which can cause locking of the engine and serious internal damage if not addressed immediately.

Apr 02, 2010 | 2003 GMC Yukon Denali

1 Answer

Rear screen wash motor runs very short burst , no water delivered to screen


find the hose that goes to the rear, fill a syringe with water and try to see if water comes out, then check the rear windsheild nozzle to make sure it's not clogged,get back to me if you need more help Thanks Ray

Feb 17, 2010 | 1998 BMW 3 Series

1 Answer

I have got Vauxahall Zafira wiper water doesn't come. Checked water is there. clean heads, undue the tube from heads. water doesn't come into the tube.


Underneath the water-tank a motor with water pump is fitted. Inside the pump there is free slideable metal cylinder, responsible for front and rear screens water supply. If some dirt is in water then it chokes this cylinder and as a result no water will be delivered although motor is running. I've cleaned the pump of my own car's screen washer and now its working. you need some time to invest in. Otherwise buy a new motor (costs around 20-30 quids from car parts shops).

Jan 07, 2010 | 2006 Peugeot 405

1 Answer

Mk 4 golf rear wiper too much water


the jet has a blockage and forcing the water out of the back of the jet clear the jet and put the pipe on properly yates210456

Oct 13, 2008 | 2000 Volkswagen GTI

Not finding what you are looking for?
2000 Plymouth Grand Voyager Logo

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...