Question about 1994 Chevrolet Corvette

1 Answer

Need location of an ignition module for a 1994 corvette

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 587 Answers

Its located on the front left upper side of engine, just look at any autozone web page and look at the picture of the part... its not hard to replace just make sure you use the white heat grease tht comes with it... cost of part $80.

Posted on Oct 18, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is ignition control module location on a 1994 s-10


The Ignition Control Module is located: Under hood, center, rear engine area, mounted in distributor

Aug 28, 2017 | 1994 Chevrolet S-10 Blazer

2 Answers

How do you locate and change an ignition control module on a 1994 Camaro?


1994 Chevrolet Camaro 3.4L SFI 6cyl

The Control Module-Ignition is located: Under hood, center, front engine area, below valve cover, mounted in distributorless ignition assembly

1994 Chevrolet Camaro 5.7L SFI OHV 8cyl

The Control Module-Ignition is located: Under hood, center, rear engine area, mounted in distributor

Jul 18, 2015 | Cars & Trucks

1 Answer

No spark


Have you tied replacing the ignition module in the distributor?

Nov 19, 2010 | 1994 Chevrolet Corvette

1 Answer

Getting spark and fuel and did a tune up and put new injectors in there but the car cranks but wont start and it is 1988 corvette


The ignition module and the pick-up coil/stator located inside of the distributor is what generates the signal that the ECM (Engine Control Module) uses to time and fire the fuel injectors, as well as the signal to run the fuel pump and the dwell signal timing to fire the ignition coil, and a faulty ignition module can cause any one of these systems to malfunction.

That does sound like a malfunction with the ignition module inside of the distributor, and you can remove the ignition module and have it tested for free at most auto part stores.

If you do purchase a new ignition module be sure that it does come with a silicone grease or a die-electric compound because it is a heat sink and the ignition module will burn up without it.

To install the new ignition module first clean out the mounting surface inside of the distributor. Then completely coat the metal contact surface under the ignition module with a thick coat the silicone grease or die-electric compound and do not leave any of the metal contact surface of the ignition module un-coated with the silicone grease or die-electric compound, and be very careful not to over-tighten the ignition module or it will be damaged.

The same principal applies to HEI (High Energy Ignition) ignition systems with the ignition coil mounted in the top of the distributor cap.

Sep 25, 2010 | 1988 Chevrolet Corvette

2 Answers

Trying to locate the ignition module for chevy blazer s10 1994


Ignition module sits in the ignition distributor, remove distributor cap, there will be two elec. harness plugs, the one with two wire's is for the pick up coil, the other one is for the ignition module, just unscrew module out of distributor and install new one.

Sep 23, 2010 | 1994 Chevrolet S-10 Blazer

2 Answers

1987 corvette cranks but wont start has fuel psi [50]and has spark.


The ignition module located inside of the distributor is what generates the signal that the ECM (Engine Control Module) uses to time and fire the fuel injectors, as well as the signal to run the fuel pump and the dwell signal timing to fire the ignition coil. A faulty ignition module can cause any one of these systems to malfunction.

That does sound like a malfunction with the ignition module inside of the distributor, and you can remove the ignition module and have it tested for free at most auto part stores.

If you do purchase a new ignition module be sure that it does come with a silicone grease or a die-electric compound because it is a heat sink and the ignition module will burn up without it.

To install the new ignition module first clean out the mounting surface inside of the distributor. Then completely coat the metal contact surface under the ignition module with a thick coat the silicone grease or die-electric compound and do not leave any of the metal contact surface of the ignition module un-coated with the silicone grease or die-electric compound, and be very careful not to over-tighten the ignition module or it will be damaged.

Jun 18, 2010 | 1987 Chevrolet Corvette

1 Answer

Where is the window control module located on a 1994 corvette?


check for the wiring diagram or manual at autozone.com they have had most of them i have had to search for ..... mrdmburns@cableone.net good luck

Aug 28, 2009 | 1994 Chevrolet Corvette

3 Answers

1989 chev corvette will turn over good but want start


check the basics fuel and spark plenty of possibilities ignition module ,fuel pump

Sep 24, 2008 | 1984 Chevrolet Corvette

Not finding what you are looking for?
1994 Chevrolet Corvette Logo

Related Topics:

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6910 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...