Question about 2002 Jaguar X-Type

1 Answer

The engine malfunction light stays on all the time,the speed and acceleration and auto gear change is not affected. the car was recently serviced,and my mechanic has not been able to determine the fault. can you tell me what the problem could be and how can it be fixed?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 491 Answers

Go to autozone and have them check the error codes to find out the possible source of the problem.
Most likely an Oxygen sensor.
Your mechanic should be able to tell you more than you related here.
He should be able to do the same test as autozone.
Autozone does this for free, in hopes that the DIY guys buy parts to fix from the zone

Posted on Oct 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nissan problems


1. Transmission fluid level
2. Engine idling rpm
3. Accelerator pedal position (APP) sensor
4. Line pressure test AT-66, "Line Pressure Test"
5. Line pressure solenoid valve
6. Control valve assembly
7. Transmission control cable, if any.
8. Short circuit in wiring harness.

Feb 23, 2014 | Cars & Trucks

1 Answer

Mini Cooper S Engine Management Light


The following are descriptions from the Mini-Cooper S owner's manual.

Service Engine Soon "?If the warning lamp comes on
either continuously or intermittently, this indicates a malfunction in the emissions-related electronic systems."

EML light: "Engine electronics ?Malfunction in the engine electronics. You can continue to drive with reduced engine output or engine speed."

Triangle circled by an arrow: "Automatic Stability Control plus
Traction (ASC+T)/Dynamic Stability Control (DSC)
?Indicator lamp flashes: System active: drive and braking forces are regulated.
The indicator lamp stays lit: ASC+T/DSC switched off with button or defective. In the event of a defect: please have the system inspected at your MINI Dealer."

First, inspect the belts to make sure none failed at high RPM. If one broke, inspect any cable or hoses in the plane of the belt to see if there was any damage (e. g., a ripped wire in the ASC+T/DSC system). Second, get a readout of the engine error code. (If you get indications of a major vacuum leak including rough idle, look for a blown head gasket.) If you get something else, please post the results in a comment so we can go to the next step.

Jul 09, 2017 | Mini Cooper Cars & Trucks

2 Answers

Chevy Reduced Engine Power and Auto Gear Transmission


still sounds like another sensor is bad. take it to shop and have it tested would be my suggestion. good luck.....

Aug 13, 2012 | 2002 Chevrolet TrailBlazer

1 Answer

Manual shift light blinks, chugs when accelerating.


Hi Seth, Check out your engine and gear box mountings! Regards John

Apr 01, 2012 | 1990 Ford Probe

1 Answer

The heater radiator leaked and radiator coolant got into the computers. Rev counter didn't work, speedo worked like a rev counter, auto changed gears at will from top to first at speed etc. I have removed...


you need a repair manual like haynes etc--the auto ECU can probly be reprogrammed thru a landline only for best results--the modules and relays in the trans may have issues or you mite need service it-change oil ,do a pressure chec ,make adjusts etc

Mar 13, 2011 | 1995 Mitsubishi Galant

2 Answers

I have a 93 honda del sol manual when the car has been turned on it accelerates by itself and it has a check engine light dont now what is wrong with it


You probably have a bad Idle Air Control Valve (IACV). In fuel injected carburetors when the throttle valve is closed the IACV opens and closes to control the idle speed. If it malfunctions the engine may rev up allowing the car if in gear to accelerate on its own . When I had a bad IACV in my Mitsubishi Lancer it would drive down the road at 50 mph with out touching the gas pedal. Fortunately, it could be slowed down by using the brakes (unlike the Toyota stories).

Nov 07, 2010 | Honda del Sol Cars & Trucks

2 Answers

AP Sensor Serviceable?


no not difficult for weekend mechanic ,just awkard and finger crunching

Dec 27, 2009 | 2001 Hyundai XG300

1 Answer

Check engine light with following codes p 1529 p0720 p0715


P1529 indicates that your TCM asked the ECM to turn on the check engine lamp.

The range switch and the output speed sensors are the items that are abnormally affecting the operation of the transmission. The diagnostic logic in your computer can distinguish these issues from one another, so you'll definitely want to do both. You have no diagnostic code for the input speed sensor (P0715) listed, so I have made no recommendation to replace it. In my opinion, it's not a labor-intensive repair, so I wouldn't recommend replacing it unless you have reason to believe it's bad.

DTC - P0720 (OUTPUT SHAFT SPEED SENSOR SYSTEM)
Code No. P0720 Output shaft speed sensor system
If the output from the output shaft speed sensor is continuously 50% lower than the vehicle speed for 1 second or more while driving in 3rd or 4th gear at a speed of 30 km/h or more, it is judged to be an open circuit or short-circuit in the output shaft speed sensor and diagnostic trouble code No. P0720 is output. If diagnostic trouble code No. P0720 is output four times, the transmission is locked into 3rd gear or 2rid gear as a fail-safe measure.
Probable cause
Malfunction of the output shaft speed sensor
Malfunction of the transfer drive gear or driven gear
Malfunction of connector
Malfunction of the TCM

DTC - P0715 (INPUT SHAFT SPEED SENSOR SYSTEM)
Code No. P0715 input shaft speed sensor system
If no output pulse is detected from the input shaft speed sensor for 1 second or more while driving in 3rd or 4th gear at a speed of 30 km/h (19 mph) or more, it is judged to be an open circuit or short-circuit in the input shaft speed sensor and diagnostic trouble code No. P0715 is output. If diagnostic trouble code P0715 is output four times, the transaxle is locked into 3rd gear or 2nd gear as a fail-safe measure.
Probable cause
Malfunction of the input shaft speed sensor
Malfunction of the underdrive clutch retainer
Malfunction of connector
Malfunction of the TCM

Is needed replace.

Nov 04, 2009 | 2001 Hyundai Elantra

Not finding what you are looking for?
2002 Jaguar X-Type Logo

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

455 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...