Question about 2002 Chevrolet TrailBlazer

1 Answer

UNDER THE DRIVERS SIDE BY THE INSIDE OF THE TIRE,THERE IS A RUBBING NOISE THAT IS GETTING LOUDER EVERY DAY. CAN FEEL IT IN THE STEERING WHEEL.NOISE GETS LOUDER THE FASTER YOU GO.NOT THE BRAKES,HAD THEM CHANGED.FRIEND SUGGESTED BALL BEARINGS.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 22,156 Answers

Take to mechanic to have a drive and second opinion then post it but i think wheel bearing as well

Posted on Oct 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 rav4 rumbling rubbing noise and feel when cranking wheel in reverse


A couple points here:
it is probably just the tire rubbing on the inside of a wheel well. Have a tire shop or mechanic check for wear of suspension components. Excessive wear on suspension arm bushings, ball joints, struts, etc. could cause "slop" or excessive travel forward and back which is not normal.
Itis also good practice to NEVER turn to steering all the way to the stops in any four or all-wheel drive vehicle.

May 31, 2014 | 1999 Toyota RAV4

1 Answer

1992 GMC sierra two wheel drive 4.3l V6 Have a vibration or rubbing noise when I turn the steering wheel sharply to the left at parking lot speeds.


If you let go of steering wheel and step on brakes does the wheel vibrate?

I'd say its either warped rotors, power steering malfunction, or possible wheel bearing, although if wheel bearing you should feel/hear a hum which would get louder depending on which way you turn the vehicle.

Aug 23, 2013 | 1992 GMC Sierra

1 Answer

2001 Blazer has vibration, Can feel vibration through the steering coulmn and floor boards. Sounds more pronounced on drivers side of car. Sounds less when making right turns. No noise when standing still....


You didn't say whether your blazer is a 2wd, 4wd, or awd. It sounds like you have a bad wheel bearing. If it's an all wheel drive, it could be the CV joint. You should also check for loose lug nuts and low tire pressure.

Dec 19, 2010 | Chevrolet Blazer Cars & Trucks

1 Answer

2004 Hyundai Santa Fe? squeaky noise frnt driver side wheel


I do think the same way. If the pads look flat and not so worn have the rotor turned to eliminate the squeaksyou are encountering

May 31, 2010 | 2004 Hyundai Santa Fe

2 Answers

Loud popping noise when turning.Seems to be coming from the drivers side front wheel


this could be a bad inner axle joint check to see if the axle boot on the left side is torn or missing also check the wheel bearings and tie rod ends by jacking up the front of the vehicle one corner at a time and grab the tire at the 9 o'clock and 3 o'clock position and wiggle it back and forth looking for excessive movement in the tie rod ends then reverse your hands to the top and bottom of the tire and try moving it from top to bottom checking for excessive wheel bearing movement it shouldn't move in or out at the top or bottom

Jan 01, 2010 | 2000 GMC Yukon XL

1 Answer

Noise coming from front of car


It sounds exactly like a wheel bearing problem.The right side its seems would be the problem. When you turn right it puts more pressure on the bad bearing making it louder. I would suggest replacing both. If on is gone the other one isn't far off. Hope this helps

Mar 05, 2009 | 2008 Hyundai Elantra

Not finding what you are looking for?
2002 Chevrolet TrailBlazer Logo

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...