An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: selespeed gearbox fault
Sorry mate now i get you. The fault could be with the ECU on the selespeed box this would need checking also click here that is a forum that discusses problems with only that type of box so may be of some help to you. Im still looking into your problem and have a few people i can talk to you so ill get back to you shortly ok.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When was the transmission last serviced it may be the oil is low or old causeing it not to select gear straight away or it could be the bands inside the box may be worn i would try the service first before jumping into worn bands
hope this helps good luck
The clutch in the Fiat stilo abarth selespeed uses the same fluid as the braking system. Just find the container in the engine bay with the braking fluid. And top up with ''DOT 4 Brake & Clutch Fluid'' Note it's not the oild for the Gearbox or selespeed. You should never touch the container that holds the fluid for the Selespeed.
Check that you have oil in the gearbox and that the drive shfts are securely fitted in the box. If all this is ok, then a reconditiond, second hand or new replacement box is the order of the day. Before you buy another box, when the box is off the engine, dismantle the clutch and inspect it. It may be the preasure plate is breaking up. Anyway it is only another ten minutes on the job. If you find wear in the clutch, repace it at the same time as you change the box. Sorry for the bad news.
hi have a 2000 2l 156 selespeed problem with gearbox is light comes on dash and gears won't select have replaced the gearbox pump at great expense but has now stopped working again can any one advise if this could be other issue
hi, it sounds like either your clutch needs replacing or the problem could just be that the gearbox needs oil this is best checking as the gearbox can sieze then this will be expensive to replace. What you need to do is take it into garage and they will remove a plug on the gearbox with special tool then this tells them if the oil is low as some oil should come out of this lug if not then they will top this up for you hopefully solving your problem, Having no oil in the gearbox could strip the gears and if its got to bad then these will need replacing but this is in the most severe of cases so hopefully your problem is just that the oil needs filling up so get this done and this will hopefully solve your problem. If you have any problem then give me a shout or if you have any questions then give me a shout then ill be glad to assist you further.