Question about 2004 Ford Explorer Sport Trac

1 Answer

I am trying to find a replacement part for a rear bumper. What is the plastic part that lines the bumper called?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,911 Answers

Go to a Ford dealer and politely ask the parts guy to show you the illustrated parts breakdown on your vehicle. You can find the part, usually with his help to speed you along, then you know what it is called, its Ford part number and price new. Then look around at junkyards for it used/cheap.

Posted on Oct 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The rear bumper cover came off how can I reinstall it


2000 Toyota Sienna rear Bumper cover replacement (1998 ...

? 3:40
https://www.youtube.com/watch?v=AY1BBdg3q74
Sep 20, 2013 - Uploaded by SergSpace
2000 Toyota Sienna rear Bumper cover replacement (1998-2003) .... Automotive Bumper Repair Specialist- How to repairyour plastic bumper cover ... Toyota Sienna Rear Shock Installation 2003, 2004, 2005, 2006 - Duration: ... 2015 Toyota Sienna XLE - Duration: 28:13. by MikesCarInfo 35,234 views.

Fixing My Mom's Prius: Loose Rear Bumper Cover - YouTube




Nov 29, 2015 | 2005 Toyota Sienna LE

1 Answer

How do I repair a plastic bumper?


these bumpers are hard to repair, most places replace the bumpers because of the problems trying to repair them. you can try a body shop that specializes in fiberglass corvettes they might have the best method.

Aug 27, 2014 | Cars & Trucks

1 Answer

How can I replace rear bumper?


Plastic buttons(they break) hold this on mostly, Top and bottom. At the fender wells you will find screws/bolts you have to remove. Nothing is hidden. Follow the perimeter of the bumper and you find the buttons and screws. To easy.

Nov 26, 2013 | Ford Edge Cars & Trucks

1 Answer

I need to reattach the rear bumper


autozone will have that replacement hardware in the body aisle its usually some assorted bolts, and plastic clips''if the car needs moved to get there, may need to wire tie it up enough or remove entirely to go there(or any closer parts or body shop.

Feb 09, 2013 | 1998 Pontiac Bonneville

1 Answer

How do I remove the panel that hold the rear parking sensors on a 2001 S550?


There are six bolts from the bumper into the rear cross member to remove, accessible from inside the boot. You'll have to remove the rubber plugs to get to two of them. After that, remove the boot lining (that's the "trunk" lining if you're a Yank) and you'll see four bolts (two on each side) that secure the bumper by screwing downwards through the metal wing into the top sides of the bumper. Now go underneath the car, and there are two bolts accessible at the rear of the bumper, accessible from beneath. Now you need to uncrew a pair of 10mm plastic nuts under the wheel arch lining/mudflap and two which are behine the rear wheels. Fold the wheel arch lining away from the bumper and there's a screw in the very front of the sides of the wing right at the point where it connects to the wheel arch. remove these (one on each side) and the bumper will slide backwards and off the body. Voila. Piece of cake. Remember to disconnect the wiring to the rear sensors and pull the multiplug through out of the hole, carefully removing the grommet.

Re-fitting is a bit trickier, so use a couple of beer crates or boxes to hold the bumper up below the rear as you line up the tabs on the air exits and slide the bumper back.

Dec 23, 2011 | 2001 Mercedes-Benz S-Class

2 Answers

How do I remove the back bumper from a 2006 hyundai tuscon?


take help of the following steps to remove rear bumper on ur tucson.

Open the trunk of your vehicle.
  1. Unscrew all the screws on the inside plastic trim that covers your bumper to trunk connection.
  2. Pry the plastic piece out with a flathead screwdriver. You will expose the bolts that attach the rear bumper to the trunk.
  3. Unscrew the bolts connecting to the inside of your rear bumper. There should be four bolts.
  4. Unscrew the two to four screws connecting to your bumper from the inside of the rear wheel tire wells. These screws are on the area of the tire well that is closet to the bumper.
  5. Slide under the rear of your car. Use a flathead screwdriver to pop the plastic rivets out of place along the underside of the rear bumper. There should be four to six rivets.

  6. Squat behind your car and firmly pull the bumper off. There will popping plastic sounds, this is the pop-in-place plastic rivets that are the last pieces that hold your rear bumper in place.

Dec 27, 2010 | 2005 Hyundai Tucson

1 Answer

How to replace the rear bumper cover on a Chrysler Pacifica


1. Open liftgate. 2. Remove both taillight assemblies by removing 2 hex-head bolts located in the area revealed when the liftgate is opened. 3. Remove 4 plastic retainers on the very bottom of the bumper cover in the rear. 4. Remove 2 phillips head screws in the wheel well rear lip. 5. Remove 4 pop-up plastic retainers in liftgate area. Use two screw drivers to lift the head and then pull the entire retainer out. 6. Remove a hex-head bolt from each side in the area revealed when the taillight assembly was removed. 7. Bend the bumper cover outward on each side to clear the wheel well lip and remove the bumper. Have a blanket or carpet on the ground to protect the bumper. 8. Remove metal clips from tabs that connect the upper bumper cover to the lower bumper cover. 9. Drill out pop-rivets that connect upper bumper cover to lower bumper cover. 10. Push tabs out of slots to separate the upper and lower bumper covers. 11. Release tab locks on chrome trim pieces and remove from upper bumper cover. 12. Reverse this process to replace the bumper cover.

Feb 16, 2010 | 2006 Chrysler Pacifica

1 Answer

Trying to get the plastic pieces of the rear bumper of a 2004 ford f250


Remove the rear bumper and push clips out from the inside of the bumper. Careful these tabs are plastic molded to the pad.

Nov 04, 2009 | Ford F-250 Cars & Trucks

1 Answer

Rear Bumper Repair


screw it back on

Oct 25, 2008 | 2001 Volvo S60

2 Answers

1996 grand cherokee bumper


there is a trim panel on top of rear bumper if you look underneath there are clips that go through metal bumper also there are 4 plastic fasteners that will need to be replaced after removing best to get clips at dealer cheap enough hope this helps ya

Jul 07, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...