Question about 1998 Chevrolet Blazer

3 Answers

Clicking sound like a turn signal constantly until brakes are applied, what would cause it? 1998 chevy blazer s10

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,911 Answers

You know often wheel bearings going bad make a clicking noise, which could be abated by braking. Roll all your windows down, get on a quiet street and see if the noise comes from a particular corner of the car. If so then you may be in the market for new bearings.

Posted on Oct 05, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 8,516 Answers

Hazard flasher is on. check hazard switch. does it stay on when key is off? Let me know and maybe I can get the wiring diagram.

Posted on Oct 05, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

The brake pads have a tab on them that can be bent to take up slack against the caliper. If they are not tight they can rattle back and forth making noise until the brakes are applied. Hope it helps.

Posted on Oct 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi: I have a 1998 Chevy Blazer 4.3 The brake lights and turn signals don't work.... HELP


Sounds like you have a bad multiple function turn signal switch. A couple things to try With your foot pressing on the brake pedal, Press the four way flasher button up and down, press and hold it down, pull up on it, or wiggle it. If the brake lights come on during any one of those replace the switch. With the key in the run position pull, push, the turn signal lever slightly. If the turn signal or brake lights start to work replace the switch. Let me know if none of those work, they usually do, and I'll get you some more in depth diagnostic info.

Jun 17, 2011 | 1998 Chevrolet Blazer

2 Answers

Clicking sound


The problem could be coming from the brake-pads or the caliper sliders. If the Stainless Steel shims are missing or worn-out then it can make a constant clicking sound that disappears when you applie the brakes. The same goes with if the Caliper Sliders are dry or loose.

May 15, 2010 | 1998 Chevrolet Blazer

2 Answers

In my 97 chevy s10 blazer the blinkers dont work unless your on the brake and constantly clicking the switch...the hazards work fine though?


there is a turn signal relay under the dash. about 1 inch high and about the width of a quarter. replace it should be fine. $5 part. happy new year.

Dec 31, 2009 | 1997 Chevrolet Blazer

1 Answer

My turn signals and flashers do not work


under the dash near the steering column will be a unit called the electronic flasher module (don't know exact location as it varies, but it will be labeled). It sounds like the unit has gone bad

Sep 11, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

Turn signal relay keeps clicking on and off


Replace the hazard warning light switch. Pretty common problem on GM vehicles

Jul 20, 2017 | 1998 Chevrolet Blazer

1 Answer

98 chevy s10 blazer turn signal


Unplug the turn signal relay from the fuse box and start you engine. Does it still make that noise?
If yes... Put the relay back in, that is not the problem.
If No...Then the relay could be bad, replace it!

PLEASE RATE THIS SOLUTION! Thank You Very Much!

Nov 25, 2008 | Chevrolet C1500 Cars & Trucks

3 Answers

Turn signal relay switch, 94 s10 chevy blazer


The Turn signal relay on a 94 s10 blazer is located under the cluster area right behind the panel that holds the parking brake release handle you will see it once a couple of trim panels get remove it will be to the right side of the brake release handle

Nov 18, 2008 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
Cars & Trucks Logo

363 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...