Question about 2000 Chevrolet Monte Carlo

2 Answers

I have a 2000 Monte Carlo SS and the Traction Control light and the Brake indicator lights stay on after I start the engine. I still have brakes, but I wanted to know if this was an electrial problem.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 8,518 Answers

May be 2 different problems. traction control uses wheel speed sensors--check sensor alignment and wiring.
Brake light on--check fluid level in reservoir.
I have a couple posts that may help:

Please see my tip at http://www.fixya.com/cars/r6003525-abs_traction_control_lights . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Please see my tip at http://www.fixya.com/cars/r6004281-brake_indicator_light_stays . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Posted on Oct 05, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 153 Answers

Sounds as if it could be an A.B.S sensor fault, will need to be plugged in and checked for fault codes, This does'nt mean you will lose brakes it just means that in the event of heavy braking the ABS would'nt operate and niether will traction control

Posted on Oct 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 monte carlo ss trac light is on how to solve


Trac Light is on to tell you that the traction is low. It senses this by "looking" at the wheel speeds. If one of the wheel speed sensors has failed, broke off, wire broken, or just dirty, the computer cannot "see" this wheel speed, and turns on the trac low light. This can also cause abnormal brake pad wear, if the car is equipt with traction control. The computer will begin to apply the brake on the wheel that is spinning faster. This will wear the pads out on the side that the computer is able to "see" the wheel speed. You need to get the sensors looked at. Check them to see if they are physically in place and the wires are hooked up.

Apr 16, 2014 | Chevrolet S 10 Cars & Trucks

1 Answer

Car is in security mode and wont start how do i get it out of security mode


Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, TCM, SRS and BCM faults and others) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Antilock brake system.TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module

Oct 24, 2012 | 2002 Chevrolet Monte Carlo

1 Answer

2007 Chevrolet Monte Carlo SS DIC "Service brake assist" after engine start. What is the cause and fix. I have no brake fade. 45,000 miles


TAKE TO DEALERSHIP.YOU HAVE A BRAKE MECHANICAL PROBLEM.DONT KEEP DRIVING. NOT SAFE UNTIL CHECKED OUT. GET TO SHOP SOON AS YOU CAN.

Sep 22, 2010 | 2007 Chevrolet Monte Carlo

1 Answer

2003 monte carlo


yes it is. it is meant to inform you that your loosing traction.

Apr 25, 2010 | 2003 Chevrolet Monte Carlo

1 Answer

2004 Monte Carlo "Trac off" light is on and "service traction system" warning is on and dinging. ABS light is also on. I was given code c1214 and c1226 software EBCM up-date? What is the problem?


The traction control and abs are both activated by the abs sensors located at all four wheels. It is common for those sensors to get covered in brake dust and get false or no signal. Also the wiring connections can become corroded over time. I am not sure what the codes are for but checking the sensors/wiring are where I would start.

Apr 23, 2010 | 2004 Chevrolet Monte Carlo

2 Answers

I own a 2003 Monte Carlo SS and it is currently in the shop because my Traction Control Service light came on with the ABS light. When this occurred a grinding noise happened underneath the entire car and...


sounds like a wheel bearing, the abs/traction control sensor is inside the bearing as the bearing gets play in it the sensor is pulled further and further from the ring gear also when the bearing has play it can collapse the caliper leaving a space between the rotor surface and brake pad which means a soft pedal quick repedative pushes on the pedal might make it improve slightly as your pumping up the caliper also the bearing will make a roaring sound that gets louder as you pick up speed with the wheels hanging down tip the wheel top to bottom and see if there is play but not every bad bearing will have play you can feel hope this helps good luck

Mar 18, 2010 | 2003 Chevrolet Monte Carlo

1 Answer

200 monte carlo problem


your emergency breck swtich which control with hand breck is faulty, Ist check it. if its ok, than check wire of swtich is short with body, it is midle of both front seats

Sep 21, 2009 | 2000 Chevrolet Monte Carlo

1 Answer

ABS and Traction control warning lights come on independtly and jointly. I believe the problem is the hub mounted sensor. How do I replace it.This is on a 2003 Monte Carlo SS.


hi if you know for sure it's a wheel speed sensor
remove that wheel
remove the caliper and caliper bracket
remove the brake rotor
there are 3 bolts on the other side of the knuckle(13mm)
remove them
remove the axle nut(1 5/16)
remove the hub bearing assembly(you may need to use a hammer on the hub flange)
hope this helps

May 25, 2009 | 2003 Chevrolet Monte Carlo

1 Answer

Brake warning light on


If you have an abs brake system, you need a code scanner hooked up to it to pin point why the light is on.Autozone can do this, if you have one near you.

Jan 31, 2009 | 2000 Chevrolet Monte Carlo

Not finding what you are looking for?
2000 Chevrolet Monte Carlo Logo

632 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...