Question about 1996 Lincoln Mark VIII

1 Answer

I need a diagram on how to remove a ac compressor on a 1996 lincoln mark VII

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 385 Answers

There's not really a diagram for the actual removal and installation. A good repair manual might list steps like these: First, your system needs to be purged of the freon. Next, unplug the AC clutch/pulley assembly at the front of the compressor. Remove the belt, then the AC lines on the compressor (usually in the back), then unbolt the AC from any mounting bracket(s) and remove. To avoid having to press on and off the clutch/pulley assembly you might want to make sure you're buying a complete compressor assembly. Read and follow those directions concerning oil for the compressor. After installing the new AC, reconnect the lines with new "O" rings. Most if not all compressor manufacturers will not honor any warranty unless you change out your orifice tube (also called an expansion valve) and accumulator (aka the dryer) at the same time. Recharge the system with the appropriate amount and type of freon, most likely R-134a.

Posted on Oct 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the fuse box on the 1998 Lincoln Mark VII model. thank you.


it is located at side of dash drivers side page 109 of your owners manual starts your fuse information the following link is the owners manual incase yours is unavailable
1998 Lincoln Mark VIII Owner Guide 1st Printing

May 23, 2016 | 1998 Lincoln Mark VIII

2 Answers

Air ride compressor not coming on 1988 lincoln mark vii


It could be your compressor. You can check this by popping it out and putting a 12 volt source on it.

Aug 30, 2014 | Cars & Trucks

1 Answer

Fuse box diagram 1992 Lincoln Mark VII


On this website (link below) you find fuse box diagram and description for Lincoln Mark VII (1988 - 1992)

Lincoln Mark VII 1988 1992 fuse box diagram Auto Genius

Dec 18, 2011 | 1992 Lincoln Mark VII

1 Answer

I require a free (correct) stereo wiring diagram for my 1989 Lincoln MarkVII?


I hope that this diagram help to you: Lincoln Mark VII

Good luck (remember rated this help).

Nov 20, 2009 | 1989 Lincoln Mark VII

3 Answers

Where is the diagram for the fuses in a Lincoln Mark 7


All vehicles are equipped with a fuse panel located on the left side of the lower instrument panel.

Nov 01, 2009 | 1990 Lincoln Mark VII

1 Answer

Need to know the color of feed wire


you need a haynes repair manual it has your wiring diagram.

Apr 25, 2009 | 1985 Lincoln Mark VII

2 Answers

1990 Lincoln Mark VII, compressor turns on, air bags don't fill. Where is relay switch?


the air lines or bags need to be replaced,check the lines at the pump

Apr 18, 2009 | 1990 Lincoln Mark VII

1 Answer

Dashboard removal 1984 lincoln mark 7


i removed a dash from an 89 mark VII, from a junkyard. it took me all day. so many things to dissconnect. move both seats as far back as possible and bring a lunch, you will need it. start on passenger side and work your way to the drivers side. while you have the dash out check the vent fan motor and ac evap.

Feb 08, 2009 | 1984 Lincoln Mark VII

1 Answer

1991 Lincoln Mark VII LSC spark plugs and wires


you don't have to worry about a special tool if you are replacing the wires but you will need a 5/8 socket with a rubber boot and an extension and maybe a swival to remove the plugs if there is an auto zone near by they will print you out a diagram for free

Jan 07, 2009 | 1991 Lincoln Town Car

Not finding what you are looking for?
1996 Lincoln Mark VIII Logo

417 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

fordexpert

Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...