Question about 2002 Hyundai XG350

1 Answer

2002 hyundai xg350

I have changed plugs and plug wires,drive a 1/4 mile then the car starts stalling. what causes this problem? another mechanic told me about the throttle plate,because it has a motor instead of a cable he thinks this maybe the problem.it's like the more you push the gas petal the lower the r.p.m. until it stalls out,but cranks right up.PLEASE HELP !!!!

Posted by on

  • cmballard May 29, 2008

    im getting good fuel pressure.if your going down the highway and running about 65 +/- and you let off the gas the car dies. it will crank back up but if you push the gas it trys to stall out.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 625 Answers

If the problem start after replacing the cables and plugs then you misplaced, they go exactly to one place, but if the problem was there, i will recomend you to check for a cloged fuel filter, or have some one chek the fuel presure, because if the fuel pressure is low the you have a bad fuel pump,
also try to remember if you got fuel for a very low price because there is many gas station selling e-85 fuel and this kind of fuel is not compatible with many cars, if you fuel smeels like tekila or alcohhol with water then your fuel is contaminated and you need to drain the tank and refill it wiht well knon fuel.

Posted on May 28, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I arrange my spark plug wires on my Hyundai Getz go 2002


How to change spark plugs hyundai accent 01 - 05 - YouTube

? 3:18
https://www.youtube.com/watch?v=tU2vwisJ7v4
Feb 16, 2012 - Uploaded by PNBNC
I filmed this right after changing my old plugs, I figured it was easy enough to film and some people can profit from it. for a ... Coil, you mean wire lol ... When you go to put the spark plug back in, never start it with the ratchet.

How To Replace Change Install Spark Plugs 2001-06 ...

? 3:17
https://www.youtube.com/watch?v=yVV2KcPDFIo
May 14, 2013 - Uploaded by 1A Auto Parts
... spark plugs. This video is applicable to the 2001, 2002, 2... ...spark plugs. This video is applicable to the 2001, 2002, 2003, 2004, 2005, 2006 Hyundai Elantra 2.0L. ... +queentonks A little know-how can go a long way. We're glad ... When do you think is good to replace my spark plugs wires? My spark ...
2001 Hyundai Accent Firing Order: Engine Mechanical ...www.2carpros.com/.../hyundai-accent-2001-hyundai-accent-firing-orderApr 23, 2009 - Engine Mechanical problem 2001 Hyundai Accent 4 cyl Two Wheel Drive Manual 95000 ... Now I'm trying to figure out how they go back on. How do I find out the Engine Firing Order for my car - Hyundai Accent 2001 1.5L?Which is cylinder 1 - 1.6 Accent - Hyundai Forum: Hyundai ...www.hyundaiperformance.com/.../16837-cylinder-1-1-6-accent.htmlJan 13, 2003 - 3 posts - ‎3 authorsFrom what I read though, the coil pack is configured as 1 4 2 3. I'm assuming the first wire on the coil pack goes to cylinder 1. Can anyone ...

Dec 16, 2015 | Hyundai Cars & Trucks

1 Answer

How to change spark plugs on 2005 hunydai 350xg


  • I have a 2002 XG and they should be the same but the front 3 are easy but for the back 3 you'll need to take off the intake manifold so you will need a gasket kit for the manifold. if you are not that mechanically inclined u may want a mechanic to handle that. if u have a miss make sure it's not the ignition coils on top of the front 3 spark plugs. i made the mistake of replacing all of my spark plugs @180,000 miles to find out the miss was from one of my ignition coils.
  • good luck

Jul 12, 2014 | Hyundai Motor 2005 XG350

1 Answer

2000 honda accord SE stalls randomly


Take your Accord to a competent mechanic and have it diagnosed for stored DTC data which will provide guidance for locating probable trouble causes that can be checked. This is a more practical alternative to replacing parts at random.

Jan 26, 2014 | Cars & Trucks

1 Answer

I have a 2007 jeep patriot. It stalled at stop sign started ran rough. Parked came back drove it home ran u- scan code p0017 replaced crank and cam sensors still runs rough changed plugs were bad. I was...


code p0017 refers to crank/ cam oosition sensor bank 1 sensor B -correlation ===causes --wiring--CKP sensor--CMP sensor--mechanical fault.
It also refers to control modules, cooling fan--no signal===causes -- wiring--ECM.
If it has a timing chain then the the advice that it will not be the chain is good. So I suggest checking out the cam/ crank sensors and wiring

Oct 22, 2013 | 2008 Jeep Patriot

1 Answer

99 Ford Explorer 5.0L Eddie Bauer, 150k miles, California Emissions Current Problem: Surges/stalls after driven 10-15 miles, dies on grades. Sometimes stall can be controlled by feathering gas pedal. ...


Several ideas. Crankshaft sensor can under-record RPM and keep fuel pressure artificially low. Would not show on Tach as it reports to PCM, not dash gauge.

Not being able to clear computer is sign something is wrong. If you look at how diagnostics show each device, they share the ground wire and test continuity through hot side of each appliance for continuity loop.

I do not have wiring diagram, but suggest you look at one to find out what causes trouble code light to activate. Could be bad wire loom or bent pin connector. Check Aboutautomobile.com site for TSB's on your model.

Sep 23, 2013 | 1999 Ford Explorer

2 Answers

Pt 031 code cylinder1 misfire


plugs are seldom the fault
the injectors are generally the problem from dirt or wiring faults
run a quality injector cleaner
or take the car to an accredited service center for a proper diagnosis and quote

May 07, 2017 | 1997 Chevrolet Lumina

1 Answer

1991 pontiac 6000


If you have a electronic dash you can turn your car over 5 times without starting it and it will give you the codes. This sounds like possible vacuum hose,distributor cap wires and plugs. Hope this helps.

Jun 24, 2012 | 1991 Pontiac 6000

1 Answer

My 1992 previa stutters and stalls at slow speeds - intermittant


air filter, fuel filter , bad fuel find dependable reputable mechanic

Apr 26, 2017 | 1992 Toyota Previa

Not finding what you are looking for?
2002 Hyundai XG350 Logo

484 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

79847 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...