Question about 2007 Land Rover LR3 V6

1 Answer

Rover 200 ie 1999 How do you adjust the headlight beam ? The dash board adjuster only moves the drivers side up down. Nothing happening on the nearside.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 153 Answers

The dash adjuster should operate both lamps, check the connection on the back of the lamp for security. Also check the motor on the back of the lamp for security as sometimes they get dislodged when bulbs are renewed. ( you can identify the motor by getting someone to operate the dash switch while you feel the back of the lamp, it should whirr )

Posted on Oct 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to adjust headlights on 2013 dodge journey


Wahoo do is pop the hood, and there should be two-three screws around the headlamp assembly. These adjust the light directions. But you'll need to pull the vehicle away from a solid wall by about ten feet I think it is, and mark off a little area to adjust the lights at the correct level. You will be able to find this at you
ocal auto parts store. I usually go to Advance Auto, or Auto Zone. They have the little kit that helps you get all the marks on the surface you are using.

Mar 15, 2014 | 2009 Dodge Journey

Tip

How to adjust AUDI headlights beams


There are two adjustment points (screws). For example left headlight: you will see one point near the end of left wing, at bottom side through a wing hole. This is for vertical plane headlight beam adjustment (up-down). Another one point is against water radiator side. This is for horizontal plane headlight beam adjustment (left-right).

on Dec 18, 2009 | Audi A4 Cars & Trucks

1 Answer

Adjusting headlight on mercedes benz


his Season:What Are Allergies?Tax Time
  1. Home
  2. Car Repair & Maintenance
  3. Car Lights Repair & Maintenance
  4. Adjust Headlights
  5. How to Adjust a Mercedes' Headlights
How to Adjust a Mercedes' Headlights

In the U.S. the type, adjustments, and illumination factors of all automobile lighting devices are regulated by the Federal Motor Vehicle Safety Standard 108. The headlights must function and be adjusted correctly. Your high beams must disperse their beams straight forward and low beams down and to the right while safely providing illumination without too much or too little glare. It is wise to check the headlight adjustment on your Mercedes at least every year. Doing it yourself will save you time and money. It will also make driving safer for you and others you may meet on the road at night. All it takes is time, some basic tools and a little patience.
Other People Are Reading

Things You'll Need
  • ratchet set
  • 1/4-inch screwdriver, at least 8 inches long
  • flashlight (if needed)
Show More Instructions
    • 1 Open the hood and prop it up.
    • 2 Remove components if necessary to allow access to the left/right and up/down adjustment knobs. They are on top of the rear side of the headlight. The upper knob adjusts the beam to the left and right. The lower knob controls up/down adjustments.
    • 3 Park with the passenger side of the car parallel to a solid fence or wall and about four feet from it. When there is dim light or darkness, turn on the lights and use your screwdriver to adjust the up/down knob on the passenger-side headlight until the light beam is parallel to the ground (you can see the beam of light against the surface of the wall).
    • 4 Turn the car so that it faces the wall approximately one car length away. Adjust the up/down knob on the driver-side headlight until it is at the same level as the passenger side headlight. Then adjust both sides until the small groove on top of the beam cutoff is directly in front of the light.
    • 5 Reinstall any components that you removed. Close the hood.
Tips & Warnings
  • This is method is generic for Mercedes models. Some may differ, as there are many models out there.
Suggest item
Related Searches: References
  • Mercedes-Benz Forum
  • fixya.com: Technical Support, Manuals, Troubleshooting and Product Recommendations
More Like This Comments

Apr 05, 2012 | Cars & Trucks

1 Answer

Which way do the headlight vertical adjustments turn to raise the beam?


Turn on your headlights and locate the two adjustment holes that have the adjustment screws inside them on the sides of each headlight. The top hole has the vertical adjustment screw and the bottom hole has the horizontal adjustment screw. Turn the vertical screw clockwise to raise the beam and counterclockwise to lower; turn the horizontal screw clockwise to move the beam right and counterclockwise to move the beam left.

click this link for more help:--- http://technoanswers.blogspot.com/2011/05/how-to-adjust-headlight-beam-on.html --------- This should help.thanks.Helpmech.

May 29, 2011 | 2002 Chevrolet Corvette

1 Answer

How I adjust headlights on a 1999 grand am?


  • Determine the type of headlights you have on your car. You can only adjust composite headlights if they bolt to adjuster plates. For dual headlights, look on the headlights for four adjustment screws per side. Sealed beam units have interior adjustment screws under the hood.
  • 4 Locate your adjustment screws. On sealed beam units, you may need to remove the trim screws and pull the trim off to reveal the Torx screws.
  • 5 Begin with you headlights turned on to the low beam. Use a Torx screwdriver for sealed beam units and Phillips screwdrivers for other types of headlights.



  • Dec 09, 2010 | 1999 Pontiac Grand Am GT

    1 Answer

    How do you adjust the height of the dip headlights on a 1999 ford cougar please.


    2 ways. One on the dash board you have a 3 level adjustment scroll switch and secondly pop the bonnet and on top of the headlight assembly you will find adjusters that can be adjusted with hex socket or hex key (allen key/socket) You will find headlight beam symbols with adjustment angle marks near the adjuster. Let me know if you still cant find it. I will post pics.

    Dec 06, 2010 | 1999 Mercury Cougar

    1 Answer

    I Have an Audi a4 Quatro 2004 model. Adjust Low Beams?


    There are two adjustment points (screws). For example left headlight: you will see one point near the end of left wing, at bottom side through a wing hole. This is for vertical plane headlight beam adjustment (up-down). Another one point is against water radiator side. This is for horizontal plane headlight beam adjustment (left-right).

    Nov 19, 2009 | 2004 Audi A4

    5 Answers

    How do i adjust my headlingt on a 2001 suzuki xl7


    The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

    You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

    Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

    For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

    For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

    Nov 14, 2009 | 2001 Suzuki Xl 7

    2 Answers

    I have a 1998 landrover freelander how do i adjust the headlights ?


    The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

    You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

    Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

    For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

    For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

    Jul 14, 2009 | 2004 Land Rover FreeLander

    3 Answers

    How do i adjust the headlight beam on my Subaru Forester X MY06 Model


    on each headlamp assembly, there will be either one or two plastic nuts that you can turn.

    If you only have one nut on each, that will adjust the vertical aim of the headlights.

    If you have two nuts on each, one will adjust the vertical and the other will adjust the horizontal.

    Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

    If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

    Apr 26, 2009 | 2006 Subaru Forester

    Not finding what you are looking for?
    2007 Land Rover LR3 V6 Logo

    Related Topics:

    136 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Land Rover Experts

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    yadayada
    yadayada

    Level 3 Expert

    75117 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7772 Answers

    Are you a Land Rover Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...