Question about Saturn Outlook

1 Answer

Get headlight out of body to change bube - Outlook Saturn Cars & Trucks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 651 Answers

You don't need to take the headlight out. just the bulb. usually just twist it and pull it out. replace oppisite.

Posted on Oct 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to change the headlights in a 1998 cavalier but I don't know how to take off the cover for the headlights?


You change the bulbs from the back of the composite headlight assembly. Open the hood, turn the bulb connector counterclockwise-about a quarter turn, and pull connector and bulb out. Take old bulb out, put new on on-don't touch the bulb glass with your fingers, body oil may shorten bulb life.

Dec 23, 2012 | Cars & Trucks

1 Answer

Problem with the Headlight control swtich on 2010 Sebring


it is your bcm which is your body control module

Dec 09, 2012 | 2010 Chrysler Sebring

1 Answer

98 voyager headlights always on


You may need to find a wiring diagram to troubleshoot this - - the body computer is involved since it controls the high and low relays.
Do the lights go off if you unplug the relays ?

Aug 28, 2012 | 1998 Plymouth Voyager

1 Answer

My headlights are too dim to drive at night. I have replaced the bulbs, but it did not fix it. I can only see to drive when I use the high beam. How do I fix this?


Try cleaning your earth /neg wires from the headlight to the body.Inspect for loose connection
Change headlight relays..Go up a size and
Instead of 50w ,install 100w bulbs

Jul 30, 2011 | 2000 Nissan Frontier

2 Answers

The bulb in my left headlight is burned out. How do I change it?


FIRST OF ALL YOU HAVE HALOGEN BULBS YOU NEED TO WEAR CLEAN DRY GLOVES ON HANDS WHEN HANDLING HALOGEN BULBS.OIL FROM HANDS WILL CAUSE THEM TO BURN OUT.OKAY TO REPLACE HEAD LIGHT BULB.OPEN HOOD AND PULL UP THE RELEASE LEVER AT THE BACK OF THE HEADLIGHT HOUSING.THE HEADLIGHT HOUSING SLIDES IN AND OUT OF THE BODY IN TRACKS.PULL THE HEADLIGHT HOUSING FAR ENOUGH FORWARD TO DISCONNECT THE ELECTRICAL CONNECTORS THEN SLIDE THE HEADLIGHT HOUSING AT THE WAY OUT.TO INSTALL THE HOUSING SLIDE IT BACK IN ALIGNING THE RIDGES ON EACH SIDE WITH THE TWO TRACKS IN THE BODY.WHEN THE HOUSING IS IN FAR ENOUGH REACH THROUGH FROM THE INSIDE THE ENGINE COMPARTMENT TO REATTACH THE ELECTRICAL CONNECTORS.

Aug 19, 2010 | 2000 Volkswagen Beetle

1 Answer

How do you change the headlight bulb on a 2006 Chev Trailblazer


When you open the hood you will be looking straight down at the light lenses. On both sides of the lense body on the top you will see two small steel clips. Lift the clips up and this releases the lense body. You will now be able to pull the body out straight toward you. You may need to wiggle it around a bit as it has a habit of jamming up on the wheel well side of the vehicle. Once its out grab the light harness and turn it counter clockwise and pull it out. Repalce the bulb and reverse all the instructions to replace the body.

Feb 27, 2010 | 2006 Chevrolet Trailblazer

4 Answers

Chevrolet Equinox how to change the head light


Hiya
IF it's the headlight's light bulb you want to access to pull out old bulb and install new bulb, here it is:
You know where the 3 bolts that secure the headlight body on the frame, also pull out the 4 black plastic clips that holds the grille-it's located on the top grille brackets (it's close to the top radiator area)
When you pull out the clips, gently pull the grille away from the top frame, then pull the headlight body away carefully to allow your hand to gain access behind the grille/headlamp body, find the wire that connects to the headlight bulb, use your fingers to feel the plastic 'collar ring' around the socket and twist it counterclockwise (just like unscrewing a lid off the jar) and pull the socket out with the bulb.
This space is tight for your fingers so it takes patient to get the job done.

IF it's the ENTIRE headlight body you want to remove it off the equinox (since you mentioned you've removed the 3 screws) there's one more that still holds it down is the black plastic tab that's only accessible inside the fender! So to gain access under the fender, remove the plastic wheelwell liner part located underneath the front-left fender (driver's side) there's a small screw and few plastic clips you'll need to remove it to move the wheelliner liner aside to locate that headlight body's plastic tab on the fender frame, use a plier to 'unlock' the tab out of the hole.

Feb 06, 2009 | 2005 Chevrolet Equinox

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...