Question about 1987 Jeep Cherokee
I got hit in the passenger front quarter panel and the car stopped running. I no longer have power going to my distributor and i was wondering what would cause it to not have power to the distributor. Is there anyway that i can somehow hotwire the distributor to get the car to fire? i have 8 volts to the distributor
How is wired the ignition coil on cherokee laredo 1987 4WD 4.0, I remove it an I do not know how to wire it!
Posted on Oct 23, 2008
A lot of the wiring runs behind the front bumper on the right, these probably got cut when you got hit. I had a similiar problem, Pulled the bumper spliced the cut wires and the engine started and ran fine.
Posted on Jun 25, 2008
Is the voltageon your battery still above 12.5 volts if not depending on the impact of the collision your battery plates might have touched and shorted out so check the voltage at the battery otherwise find out what the voltage should be at the distributer i am pretty sure that it is more than 8 volts if so trace that wire and see if there is any problems there check your dist ground aswell.
Posted on May 28, 2008
Tips for a great answer:
Feb 28, 2010 | 2000 Dodge Caravan
Jan 23, 2010 | 1995 Nissan Pathfinder
Aug 28, 2009 | 1996 Chevrolet K1500
Mar 14, 2009 | 2008 GMC Sierra 1500
Mar 04, 2009 | 1992 Pontiac Grand Am
Feb 04, 2009 | 1989 Oldsmobile Cutlass Ciera
Jan 28, 2009 | 1999 Mercury Villager
Jan 27, 2009 | 2002 Ford Excursion
Oct 08, 2008 | 2002 Pontiac Grand Am
192 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: