Question about 1998 GMC Sonoma

Open Question

I have a recurring PO442 code, new purge valve and solenoid. Had the truck smoke tested and no leak. Bad canister?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 169 Answers

SOURCE: '96 Regal Purge Canister Valve?

ADAM
THE PURGE SOLANOID IS ON THE ENGINE WITH A RED CONNECTOR ON IT. IT IS LOCATED ON THE REAR OF THE ENGINE ABOVE THE REAR VALVECOVER. YOU ARE ACTUALLY LOOKING FOR THE CANISTER VENT SOLANOID AND IT IS IN THE REAR OF THE CAR AND THEY FAIL OFTEN. GET THE PART FROM G.M. AND THEY CAN TELL YOU EXACTLY WHERE IT IS. THE G.M. PART IS UNDER $30.00.

Posted on Aug 26, 2008

  • 275 Answers

SOURCE: 2004 Pontiac Grand Prix Evaporative Canister

you should be able to fix it look for a can near the fuel tank that has vacuum hoses coming out of it and you should be able to just buy the bad solenoid

Posted on Nov 03, 2008

savdragon
  • 37 Answers

SOURCE: Mustang GT 4.6 EVAP Canister Purge Valve Location?

You will need to remove the right front wheel & wheel well liner. The canister purge valve is behind the cover. It should have two tube going into the bottom and one on the side near the top.
You can fix it!
If this helps you out please rate me!
Brett

Posted on Mar 19, 2009

HD Road King
  • 70 Answers

SOURCE: 2006 gmc sierra 1500 4.3 . check engine light on.

More than likely the evaporator vent valve.

Posted on Sep 28, 2010

csmock132
  • 4669 Answers

SOURCE: getting an error code of PO449 for a check engine

You are right. You need the vent valve not the purge valve. The vent valve is a dealer item. Also this is a common problem and GM has released a bulletin on this that involves moving the location of the valve and running some new lines. It comes as a kit from GM, and it costs about a 100 bucks.

Posted on Dec 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

PO442 code on my 2004 mit galant,LS V6 3.8 how to fix an evap problem small leak


the causes for the small leak are listed as
hose connections --intake leak--- EVAP canister--- EVAP canister purge valve
check hoses for small cracks ( old hoses) or replace the purge valve

Sep 19, 2016 | 2004 Mitsubishi Galant

1 Answer

Codes0441 0442 0455 0456


codes po441 po442 po455 po456. code po441 - EVAP system no flow during purge conditions.code po442 -EVAP system small leak detected conditions. code po455 - EVAP system large leak detected conditions.code po456 - EVAP system very small leak detected. possible causes loose damaged missing fuel cap.fuel tank sensor disconnected or failed. ORING on top fuel sending unit leaking.purge valve vapor line clogged disconnected or purge solenoid failed.vent solenoid not closing or has failed.

May 23, 2013 | 2002 Dodge Durango

1 Answer

How do I resolve diagnostic code P0455 on my 2005 Chevrolet Tahoe?


Here is the definition and possible causes.

Possible causes - Missing or loose fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- EVAP canister or fuel tank leaks
- EVAP system hose leaking
- Fuel tank leaking
P0455 CHEVROLET Description This diagnosis detects leaks in the Evaporative Emission System (EVAP) purge line using engine intake manifold vacuum. If pressure does not increase, the Engine Control Module (ECM) will check for leaks in the line between the fuel tank and EVAP canister purge volume control solenoid valve under the following vacuum test condition.


The vacuum cut valve bypass valve is opened to clear the line between the fuel tank and the EVAP canister purge volume control solenoid valve. The EVAP canister vent control valve will then be closed to shut the EVAP purge line off. The EVAP canister purge volume control solenoid valve is opened to depressurize the EVAP purge line using intake manifold vacuum. After this depressurization is implemented, the EVAP canister purge volume control solenoid valve will be closed.
Read more: http://engine-codes.com/p0455_chevrolet.html#ixzz24fVfq0Bx

Aug 26, 2012 | 2005 Chevrolet Tahoe

1 Answer

What does po442 code on a 1999 pontiac grand am 3.4 v6 mean



Trouble Code: P0442

EVAP System Small Leak (0.040") Detected
Possible Causes:


Charcoal canister is loaded with fuel or moisture . Fuel filler cap is loose, cross-threaded, damaged or wrong part . Fuel tank, fuel filler neck or fuel sending unit 'O' ring is leaking. Fuel tank pressure sensor is damaged, disconnected or it failed. Fuel tank vapor line(s) is clogged, damaged or disconnected. Purge valve vapor line is clogged, damaged, or disconnected. Purge solenoid or Vent solenoid has a small leaking (sticking.) PCM has failed . TSB 01-06-04-007A contains a repair procedure for this code.

Jul 28, 2012 | Pontiac Grand Am Cars & Trucks

2 Answers

Obd code p0457 fuel cap replaced mil reset defect not cleared connection checked ok


The code is for a large leak in the EVAP system such as a loose or missing gas cap. But it could also mean a loose or missing hose to the canister or other leak in the tank.
The computer vents the tank several times an hour while the engine is running, and it checks the system by pressurizing the gas tank. If the tank will not hold pressure the code is set.
You may have to check the top of the tank where the fuel pump gasket is, as well as the vent lines to the front of the car.
A mechanic would perform a smoke test to look for leaks.

Jul 23, 2012 | Honda Accord Cars & Trucks

1 Answer

Engine lite on. diagnositc code indicates purged valve C fault. What is this.


DTC P0443 - Evaporative emission control system Canister Purge control valve (CANP) or vapor management valve (VMV) circuit malfunction.
Your cars computer is telling you there is a leak. But most of the time when the system is smoke tested, the tech comes up empty handed. This is because the leak is intermittent. There are several solenoids that can do this on your evap system. The purge valve and the vent valve are the most common. Looks like it is going to be your purge valve.

That said, it could be any of the following:

Bad purge solenoid (internal short or open)
Wiring harness chafing or rubbing another component causing short or open on control circuit
Connector worn, broken or shorted due to water intrusion
Driver circuit inside powertrain control module (PCM) is bad


Code P0443 - Evaporative emission control system Canister Purge control valve (CANP) or vapor management valve (VMV) circuit malfunction. The PCM expects to see battery voltage when the solenoid is commanded off and voltage under 1 volt when the solenoid is commanded on.

Enabling conditions: Run engine off and running self tests to check this code. Blocking Action: This code can block the following monitors: Fuel Control, O2 monitor, Catalyst Monitor, misfire monitor. Testing: Check to see if the purge solenoid will block vacuum when it's off and pass vacuum when it's turned on. Typical resistance is 50 to 100 ω.

Hope helps.

Sep 22, 2011 | 1998 Ford Taurus

1 Answer

Sl1 year 2000 with PO442 error. car was smoke


GAS CAP LOOSE OR FAULTY.THE PURGE SOLENOID OR VENT SOLENOID HAS A SMALL LEAK STICKING.

Jul 15, 2010 | 2001 Saturn SL

2 Answers

Check Engine lite comes on Code PO440


16824/P0440/001088 - EVAP Emission Control Sys: Malfunction Possible Symptoms
  • Malfunction Indicator Light (MIL) active
Possible Causes
  • Evaporative Emission (EVAP) System leaking
  • Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80) faulty
  • Evaporative Emission (EVAP) Canister Purge Solenoid Valve (N115) faulty
Possible Solutions
  • Check Evaporative Emission (EVAP) System Sealing
  • Check Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80)
  • Check Evaporative Emission (EVAP) Canister Purge Solenoid Valve (N115)

Jun 17, 2010 | 2000 Volkswagen Beetle

2 Answers

P0441 EVAP Control System Incorrect Purge Flow


Error Code: P0441
Fault Location:
Evaporative Emission (EVAP) System - Incorrect Flow Detected
Possible Cause:
Malfunction Indicator Lamp (MIL) active.
Evaporative Emission (EVAP) Canister Purge Regulator Valve faulty/jammed.
Evaporative Emission (EVAP) Canister Purge Solenoid Valve faulty/jammed.
Evaporative Emission (EVAP) Canister Sealing faulty.
Pipes between Tank Breathing and Throttle Body leaky/blocked.
Hose connection(s).
Intake leak.
Possible Solutions:
Check Evaporative Emission (EVAP) Canister Purge Regulator Valve .
Perform Output Test.
Check Evaporative Emission (EVAP) Canister Purge Solenoid Valve.
Check Evaporative Emission (EVAP) Canister.
Perform Basic Setting.
Check Pipes between Tank Breathing and Throttle Body.
VSV connector near air filter box disconnected.

Jun 15, 2009 | 1996 Chevrolet Monte Carlo

Not finding what you are looking for?
1998 GMC Sonoma Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...