Question about 1994 Volkswagen Jetta

1 Answer

Radio is on safe mode

Where can i get the code?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 46 Answers

Phone your dealer and have the vin# and they should be able to get the code for you.

Posted on May 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Safe mode car radio


To unlock your VW factory radio from "SAFE" mode, you will need to enter the radio code. Typically, the code is written on a radio card included with the documentation for the vehicle when the car is first sold.

If you don't have the code, or have lost it, you can retrieve it by visiting your VW dealer. You will need the car's VIN number and the serial number of the radio (located on the body of the radio).

The procedure to enter the code is as follows:

Press the "MODE" and "SCAN" buttons simultaneously and hold them until "1000" appears on the radio display. Release the buttons as soon as this number appears.

Refer to your Radio Card and use the station preset buttons ("1", "2", "3" and "4") to input the code. Press the "1" button repeatedly to input the first digit, the "2" button to input the second digit, etc.

Press and hold the "MODE" and "SCAN" buttons simultaneously until "SAFE" appears again. Release, and the radio should be unlocked.

Do not enter the wrong code more than three times, or the radio will lock itself. Note the dealer can also enter the code for you (they may charge a small fee).

Oct 17, 2013 | Volkswagen Cars & Trucks

1 Answer

I have a 99 a6 quattro i have the code for the radio but when i press rbds and pscan buttons nothing happens it is in safe mode and wont let me do the steps to get out of it!


First of all be sure that your four digit security radio code is correct. If you had attempted three times without success to exit from safe mode by inserting the code, radio is blocked in safe mode for a while. Now turn ON the radio (in safe mode), and let it turned ON for one hour, then follow this procedure.
The sequence of VW radio gamma programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.

For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.

The radio is now ready for use!

Jul 30, 2011 | 2000 Audi A6

1 Answer

Cant get radio out of safe mode


How to get 2006 Audi S4 radio out of safe mode: IMPORTANT NOTE: You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!
The sequence of programming for Audi radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Nov 27, 2010 | 2006 Audi S4

1 Answer

I have an audi A4 Quatro avant 1998, the radio is locked SAFE mode, I have the code but I do not know what to do.


How to exit the 1998 Audi A4 radio out of SAFE mode: IMPORTANT NOTE: You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!
The sequence of programming for Audi radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Nov 27, 2010 | 1998 Audi A4

1 Answer

My radio is in 2 SAFE mode on my 2004 Audi TT. My mechanic had to disconnect the battery to replace some parts on my car. when he turned the car on the radio was in 1 Safe mode. The code in the manual he...


IMPORTANT NOTE: You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!
The sequence of programming for Audi radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Nov 20, 2010 | 2004 Audi TT

3 Answers

How do i get the audi radio off safe mode?


IMPORTANT NOTE: You must have the security anti-theft code for yours Audi Concert radio from the car manufacturer! For Audi Concert the sequence of programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Please rate my response. Thanks!

Apr 26, 2010 | 2000 Audi A4

2 Answers

How Do I Get My Radio Out OF Safe Mode? Anyone?


Hi.

The radio goes in safe mode when the battery gets disconnected, or if for some reason the radio lost power connection.

To get the radio out of safe mode you will need the anti theft code.
This is available with car documentation, in first page of the in car entertainment booklet, or on first page of the car booklet (not the car manual).

Once you have got the code, do the following:

  1. Hold down both the AM/FM and the SCAN button at the same time, until the display shows "1000".
  2. Use the buttons 1,2,3,4 to change each of the digits until you get displayed the same code as printed on documentation (ensure that it is the right one).
  3. On some radio (programmable models), the default code is "1111" or "1234".
  4. Press and hold the AM/FM and SCAN buttons again until the radio is starting.
  5. If you fail twice the code, the radio will lock up in safe mode, and you won't be able to enter the code again.
  6. If the radio is locked, or if the code is lost, the unlock can be done at the nearest car dealer, usually for a small fee, or for free.


Regards.

Feb 07, 2010 | 2001 Audi A6

1 Answer

Landrover cassette display appear "SAFE" This cassette model is XQE500550.How can fix safe mode.


If you have the correct radio code for the unit, just wait about an hour with the power on in the radio. The screen will eventually display (code) or (enter code) follow the directions in your radio manual to enter the code and the radio will be operational again. The safe mode is on because either the radio fuse blew, the battery was too low on charge or the radio was momentarilly disconnected from it's power source. Most common is low battery voltage. Charge your vehicle battery, locate the radio code, wait till radio displays CODE and enter the code an have happy tunes again.

Nov 30, 2009 | Land Rover Defender Cars & Trucks

1 Answer

2001 Audi A4 radio in safe mode. Battery was


sorry to say, you will need to take it in, it needs to be hooked up to their computer to reset and have it start up poperly. It just like a pc when it crash it will try to start in safe mode until you select "Normal" start up

Oct 13, 2009 | 2001 Audi A4

3 Answers

Radio in SAFE mode


Hey.. i just had the same thing happen... bought a 1994 Jetta.. radio in safe mode... so i went online and found out.. hold scan mode and the arrows after your preset station button.. then after like 3 secs or so you'll see " 000" on the display.. use the preset buttons.. 1,2,3, and 4 to change the display to enter your code :D if you lost your code go to VW dealer and pull radio out and see service center .. carry VIN code in as well and they can look up your code.. takes like 5 mins and is FREE,,, man i love that word :D

Aug 21, 2008 | 1994 Volkswagen Jetta

Not finding what you are looking for?
1994 Volkswagen Jetta Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...