Question about 1993 Isuzu Pickup

1 Answer

My turn signals aren't working. The hazards work but when I put the lever up the turn signals don't go on. All I hear is buzzing but no clicking or flashing. Is there a fuse or something that I have to replace and where can I get it?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

It sounds like you just have a bad flasher. its typically the size of a "c" battery and located under the dash on the driver side, no tools needed just twist it off and twist on a new one 5-15 dollars

Posted on Oct 05, 2010

  • 2 more comments 
  • matorres9009 Oct 05, 2010

    It wasn't the flasher. I replaced it but the problem still persists. What else could it possibly be?

  • ch0chita Oct 05, 2010

    then its definitely the relay, Which in under the dash also usually on the drivers side near the stereo.

  • matorres9009 Oct 05, 2010

    is it a DIY job or do i have to take it somewhere? when i play with the hazard switch the turn signals start to work SOMETIMES...what can I do?

  • ch0chita Oct 05, 2010

    It is definitely a DIY job, the relay just pops in and out like a fuse, its usually square with at least 2 flat prongs sticking out only its much bigger than a fuse

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HAZARD AND TURN SIGNAL LIGHTS WILL NOT WORK


Turn signals and flashers not working - MyTractorForum.com - The ...

www.mytractorforum.com/.../193023-turn-signals-flashers-not-working....
Jun 5, 2011 - My turn signals and flashers are not working on my BX1500. I can hear the ... I hear nothing when I depress the hazard button and no light.

Turn Signal and Flasher Repair JD4300 Recovered Part 7 ...

? 19:17
https://www.youtube.com/watch?v=UrLN5xzbOzY
May 9, 2014 - Uploaded by mars1952
Turn Signal and Flasher Repair JD4300 Recovered Part 7 ... I bought a 4310 new in 2004 and I know these are great tractors, not the ... I have a John Deere 4400 and I wouldn't mind putting a set of those on it to protect the lights. .... Ford Explorer 2003 - MyTurn Signals Stopped Working - Duration: 2:15.

Jan 11, 2016 | Cars & Trucks

1 Answer

The hazard lights buzz and don't work.


if fuse okay,could have faulty multifunction switch.

Nov 20, 2012 | 1997 Chevrolet Malibu

1 Answer

I need to find the flasher relay for a grand marquis 2001 .does it has one? My turn signals wont work I can hear the sound but don't even flash


Yes, it does have a flasher, although it may be a combined unit with the hazard flashers relay. So you hear the clicking of the flasher relay? That seems to indicate the relay is working properly. Have you checked the bulbs and the turn signal fuse? Any turn signal bulbs light up anywhere, front or back?
How about your brake lights, do they work? Your car may have separate, stand alone turn signals in the rear, but many American cars use the same bulb and same filament on the bulb for the brake lights and turn signals. If your merc is like this and the brake lights work, then the bulb must be good.
Turn on the hazard flashers and see if all bulbs work and flash at each corner of the car. This would be the same bulb as for the turn signals. If they work, it could be a bad turn signal switch, may even be the flasher relay somehow malfunctioning, and in a few cases, a bad hazard switch can affect the turn signal switch. Check fuses and bulbs first. If you have any type of body control module that controls lights and other accessories, you may have to investigate that. I know I'm not being very helpful, just throwing out a few suggestions. Good luck.

May 21, 2012 | 2001 Mercury Grand Marquis

1 Answer

My hazards in my 1997 camaro rs work, but the back and front turn signals dont. The lights for the signals dont work in the dash either, just the lights for the hazards


check the signal flasher ( little silver or colored can in fuse panel or under dash. 4 ways have 1 flasher and the signals have a seperate flasher. Put hazards on to hear click, to determine which flasher is which. Hope this helps

Apr 13, 2009 | 1997 Chevrolet Camaro

2 Answers

Turn Signal keeps clicking


either the lines are grounded or the lever on your steering wheel is stacking up

Feb 26, 2009 | 2000 GMC Yukon XL

2 Answers

97 honda accord turn signal problem


Flasher unit is bad. Replace flasher

Dec 28, 2008 | 1997 Honda Accord

Not finding what you are looking for?
1993 Isuzu Pickup Logo

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...