- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Dec 31, 2007 - 14 posts - 6 authors
Tech Code "dtc P0014" 2003 Trailblazer - posted in Chevy ... it had been serviced before for the same thing in 2003 or 2004! ... replace the camshaft actuator solenoid, change the engine oil and .... The extended war. co. prob. would not be to happy since they already fixed the sensor once or twice already.
Is it getting gas to the cylinders , is there spark at the spark plugs ! You should check thing's out before replacing parts an hoping it fix's the problem .You need to find out what is missing ,fuel ,ignition or an engine problem ! Cranking No Start Real Time Diagnosis Ford Focus
code p0014 refers to camshaft position(CMP) actuator . exhaust /right /rear bank 1--timing over advanced/system performance===causes valve timing--engine mechanical fault--CMP actuator . If you have done no work on the engine then I would be replacing the exhaust cam actuator (CMP actuator)
The P0014 code refers to one of your camshaft position sensors being out of time with the other. Does not mean its bad but it could be. The P0128 code refers to your engine running cooler than it should. Your coolant thermostat may be stuck open not letting the engine warm up to it's proper temp. Now you did not say which engine you have in the TrailBlazer. There are 2 different engine used in the year model. Please repost with that info.
hi, this is due to oil pressure send to the exhaust camshaft position sensor,, before u change this sensor or checking engine timing,, change the positon of sensor a to sensor b and check the dtc if it is still p0014, if other dtc will send to ecmit means that the sensor is the problem, if P0014 still the code, you may now check bank 1 timing