Question about 1999 Ford F150 Regular Cab

1 Answer

Brake switch on pedal is working and there's no blown fuses and brake lights don't work bulbs are good cant find a short either

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 131 Answers

If the 3rd brake light works but not the lower lights then you have a wire depined from the multifunction turn signal switch or the M switch is bad.

Posted on Oct 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Why my stop lamp dont turn on when i stop


While if it was working before then there is little problems which you have to check steep by steep !
1. go check your car light bulbs & light grips on back of your car .
If Bulbs look good then.
2. check fuse in fuse box which is on driver side & on fuse box cover its written on stop lamp & you can check other fuse as well just to confirm if there is another shorting.
If all fuse are good then check .
3.Check brake pedal upper side there is one switch which have two wire out check there wire or grip if its have losing then it wont work.
if its look proper attached then .
4.This switch have threads which can be adjustable before taking any step to adjust just check when you are pressing a brake pedal there is a plastic needle working inside its come out or not ,If its come out then your brake light switch gone wrong or if its not coming then plastic needle is jammed inside & your car brake light not working.
Just to confirm if your brake switch is in good condition or in bad condition .
Okay this is final steep you have to check or confirm it switch problem .....
5. There is two wire on back of brake pedal switch or in a grip coming out , So if its in grip or just on clips, then take a wire piece & bypass or joint both wire which is coming from wire loom sid to brake pedal & check your brake lamps if its blink or on than 100% you car brake pedal switch is not working or inside its short , So replace your car brake pedal switch or if still not blink or On then there is some issue in your car wiring & you better check you car to you auto electrician......
Hopefully you will save your amount not to visit you auto electrician.
best of luck....

May 15, 2014 | 1994 Nissan Sentra 4-Door

1 Answer

My brake lights don't work on my 1999 Oldsmobile


IDK! Maybe the thid brake light bulb has a short in it.

Jan 24, 2013 | Cars & Trucks

1 Answer

2004 Armada. Brake lights don't work.


may have to purchase an electrical shopm manual for more information

Mar 31, 2012 | 2004 Nissan Armada

2 Answers

My brake lights dont work everything else but rakes


Thanks for choosing FixYa and welcome to the site. You need to check the fuse first. It may have blown. If the fuse is good, check the bulbs. If both are good, you probably have a bad brake switch. It is located above the brake pedal. It looks like a chrome looking round cylinder. The pedal actually hits the brake switch and it activates the brake. The small button may be stuck. If not, change it and the brake lights should work.

Apr 24, 2011 | 2003 Toyota Camry

1 Answer

Toyo dyna 92 break lights not working , is there a fuse for this or is it hard wired bulbs ,work fine , ?


There is a fuse for the brake lights. Check fuse and replace if blown. If the fuse is not blown, check the bulbs themselves. If the bulbs are good, then the next step is to replace the brake light switch located under steering column attached to brake pedal rod.

Feb 16, 2010 | 1992 Toyota Xtracab

2 Answers

No brake lights


Possible blown fuse or bulbs need replaced. Also check to see if the switch at the top end of the brake pedal's arm activates when the brake is applied. If it doesn't you'll need to replace it. Good luck

Oct 16, 2009 | 1998 Dodge Ram 1500 4WD

3 Answers

Changed fuse and brake light still doesnt work


Did you check for voltage at the light socket before replacing the fuse?
Was the fuse blown? If so, you need to find out why it blew. (fuses do not blow for no reason) If not, why did you replace it?

Did you check for voltage in and out of the brake switch? Brake switch failures are common on Dodge trucks. There should be voltage going in, but none coming out the other side until the brake pedal is depressed. If there is voltage going in, the fuse is not blown. If there is still no voltage on the other side when the brake pedal is depressed, then the brake switch is your problem-child.

The next step is to check for voltage in and out of the multifunction switch. (turn signal switch) The brake lamp voltage is switched on and off by the turn signal switch. Failure of the turn signal switch can cause a "no brake light" symptom. This is a common failure among most makes of vehicles. This failure can often be verified by stepping on the brake pedal and wiggling the turn signal switch. If the brake lights flicker on and off while doing this, the mutifunction switch needs to be replaced.

Oct 10, 2009 | 1994 Dodge Ram

1 Answer

Both brake lights don't work on Rover 25, even changed bulbs and they still don't work


Have you checked the fuse for the brake lights to make sure it is not blown? If bulbs and fuses are good, I would look at a defective brake light switch. These switches are typically located somewhere under the brake pedal, close to the firewall. When the brake pedal is depressed it trips the switch. Find the switch and you can easily test it with an ohm meter or multimeter. Sure hope this helped you and good luck.

Jul 20, 2009 | 2002 Land Rover Range Rover

1 Answer

20 amp fuse for brake lights continually blows out


you have a short in the wiring to your brake circuit.check the pedal switch,it could be cracked and shorting out.those switches are known for having the tail lights stay on until you hit it a few times.the other thing to check is the light assemblies.there may be enough corrosion to cause a short.instead of a fuse,wire a bulb across an open fuse.when the short shows up the bulb will light.use a 25 watt bulb.

May 15, 2009 | 2004 Dodge Dakota

1 Answer

All brake lights suddenly stopped working changed bulbs park light fuse and cant find any blown fuses what else can it be


brake switch on the pedal bad.bad relay. do you have a second fuse box if so check it. look at the wiring see if it is frayed or chafed check the connections.check all the fuses not just the ones labeled brakes.switch the relay with one that you know is good like turn signal and see if the turn signal works then check brakes.use a 12 volt test light check the brake switch and probe the wires. hope this helped if not write back and i'll give you more ideas.

Apr 24, 2009 | 1996 Buick Park Avenue

Not finding what you are looking for?
1999 Ford F150 Regular Cab Logo

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...