Question about Chevrolet S 10

1 Answer

I have a 94 s10 with a 2.2 and it wont run. has spark but no fuel power to pump. i hooked pump up to battery and had power, but still nothing. what can i do to resolve prblem?

Posted by on

  • kimcard91 Oct 05, 2010

    but the pump has juice but not when hooked up to the truck

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 178 Answers

If you ran power straight to it and still nothing the pump is definitley bad....

Posted on Oct 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 94 Buick Century wont start? Trying to figure out if it is the starter...I hear fuel pump engaging light and everything work. when I go to start does nothing...


Check your battery voltage, sound to me like your battery cold cranking amps is low. Its enough the power the lights but not turn the engine over. Have the battery replace

Jun 06, 2012 | 1994 Buick Century

1 Answer

Fuel pump cuts in but car wont start


If you have to force the fuel pump on by the relay who is controling ignition? The fuel pump will come on thru the main relay which is next to the fuel pump relay this controls ignition,go back to the begining,on one of the coil leave a 1/4 between the sparkplugwire and the coil crank the engine there should be spark is there is no spark correct for spark and fuel will return when the ECM see a valid RPM signal.so test for spark first. The Main relay is what needs to be look at

Mar 20, 2012 | Cars & Trucks

2 Answers

Replaced timing belt engine will not start


check for spark at the sparkplugs, and listen to hear the fuel pump going when key is turned on. if no pump noise and no spark it can be the auto shutdown relay located on the drivers side fender behind battery. the auto shut down shuts off power to the ignition and fuel pump if the timing belt snaps. ,,,, if you have spark and fuel pump works then check firing order on plug wires , if they are in right place then check timing , if timing belt was replaced without lining up the timing marks it wont run

Dec 31, 2010 | 1995 Plymouth Voyager

2 Answers

No gas or spark


Try your inertia switch in the cargo area in back. Its located on the passenger side rear wheel well. Push the button.
2_27_2012_8_29_26_am.gif

Sep 23, 2009 | 1994 Ford Escort

2 Answers

94 s10 blazer wont start


HAVE YOU TRIED CHECKING THE IDLE CONTROL VALVE IT MIGHT HAVE TO MUCH CARBON...OR IT MIGHT BE FUEL INJECTORS CLOGGED....

Aug 23, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

94 MAZDA MX3 REPLACED FUEL PUMP, HAS NO POWER TO PUMP, HAS SPARK, CRANKS BUT WONT START


check the fuel pump relay. it is located under the hood in the fuse box directly in front of the battery

Apr 16, 2009 | 1994 Mazda MX-3

1 Answer

97 sebring lxi, 2.5L - car died leaving driveway. wont start. been running fine, no noises, hiccups and nothing when it died. battery good, changed plugs, fuel pump buzzes when key is turned, engine cranks...


first thing you got to do is determen weather its electrical or fuel problem, you can take a test light and hook to a ground and the light end to a spark plug and see if it lights while someone turns over engine, if it lights you got spark. if its got spark, on to fuel, take fuel pressure test, don't think because you can hear pump working does not mean it is, it can sound like it is but its not, at least putting out enought pressure, not the correct amount it will not run. pumps will go out just that way with no warning at all.

Feb 03, 2009 | 1997 Chrysler Sebring

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...