Question about 1999 Dodge Intrepid

1 Answer

I have a 2000 Dodge 2.7 intrepid and i have no spark after i replaced timing chain had spark before i changed timing chain . what could it be?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

Check timing marks and also that you dont have a wire still disconnected check codes and see if it tells you something obvious.

Posted on Oct 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How I line my timing chain marks on a 2002 Dodge intrepid 2.7 litter


The timing is set by aligning the marks on the camshaft gears and the crankshaft gear with colored links on the chain. See the included link for guidance (it's for a Sebring, but the information is the same for an Intrepid). Be aware that rotating the engine after initial timing will change the relationship of the colored links with the gears. This is OK, just BE SURE THAT THEY ARE ALIGNED when the chain is INITIALLY installed. Chrysler Sebring Concorde 300 2 7L timing replacement Cloyes kit 9 0397SA

Dec 30, 2016 | Dodge Cars & Trucks

2 Answers

I have a2000 dodge intrepid 2.7 do I have a chain or belt


My info says you have a timing chain. You do have a drive belt for accessories.

Feb 28, 2015 | 2000 Dodge Intrepid

1 Answer

No spark crank sensor new 2.7


If you have no spark, and you replaced the Crankshaft Position sensor, you may have a faulty Camshaft Position sensor, failed Timing Chain or stretched Timing Chain, or a faulty ECM. Since the Camshaft Position sensor doesn't cost much, I would start with that after checking the Timing.
Also, be sure to check the condition of the Connector going to the Crankshaft Position sensor and Camshaft Position sensor.

Mar 18, 2011 | 2000 Dodge Intrepid

2 Answers

NECESITO, VER COMO VA LA CADENA DEL TIEMPO DE INTREPID 2.7 2000


2000 Dodge Intrepid 2.7L SFI DOHC 6cyl

zjlimited_44.jpg

Fig. After the timing chain is installed, the timing marks should be aligned-2.7L engine (click for zoom)

Espero que esto le ayude. Suerte, y recuerde calificar esta respuesta.

Nov 09, 2010 | 2000 Dodge Intrepid

1 Answer

My 2000 intrepid overheated and shut itself off, replaced water pump and timing chain, has 18lb pressure but seems to be leaking behind timing cover, does anyone know what this may be?


Check it out for a no start condition. If it overheated so bad that it did not have compression, and you changed the timing belt to fix the compression problem, then it is burned up. Other than that also look for fuel and spark in the cylinders. There is still some kind of hope!

Get more great, money saving, tips and tricks about your vehicle from: twitter.com/acoates23234

Thanks for the vote, and good luck!

Aug 29, 2010 | 2000 Dodge Intrepid

1 Answer

99 Dodge Intrepid 2.7L no power to ignition. Receiving Code P1684 but battery connection okay.


I have a problem with a 1999 Dodge Intrepid 2.7. Looking for some help or suggestions.


Problem: I only have a spark from the #2 coil.


Background:


Vehicle purchased from an Auction and would not start. The vehicle would only backfire. When I removed the valve covers I found that one of the rocker arms had popped out. I replace the heads with heads from a 2001 Intrepid 2.7. I used the cams, primary and secondary timing chains from the 1999 heads. Not sure if I used the original primary (left) cam sprocket from the 1999 or one I purchased in a kit from a Dodge dealership. I tried to use the new primary timing chain but it was not the same. The replacement heads were surfaced and a new head gasket was used. When I tried to start the vehicle it had no spark. The vehicle had set at several locations and parts may have been removed or changed.


Solutions Tried:


I tried 4 ASD relays with no effect. I then tested all 4 on a 2002 Intrepid 2.7 that runs and all worked. I then discovered that the Crank PS has missing. I replaced the Crank PS with one from a 2002 Intrepid 2.7 with no effect. I then replaced the Crank PS with a Crank PS from a 1999 Intrepid 2.7 and got a spark at the #2 coil only. I then replaced the PCM and TCM from the same 1999 Intrepid I got the Crank PS from and still only have spark from #2 coil. I then changed the Cam PS, still spark only from #2 coil. I have tried several coil packs on connector #2 and all have spark. Each coil pack that sparks on #2 will not spark on any other connector. Spark from #2 coil is weak.


I then replaced the wire harness from the PCM to the coils and fuel injectors and still only have spark from the #2 coil. What am I missing? Any suggestions, advice or related information will be greatly appreciated!


Thanks!

Keith P. Richardson

Kpricha2@yahoo.com

404-606-0728

May 20, 2010 | 1999 Dodge Intrepid

3 Answers

2002 dodge intrepid starting issue new water pump,new timing chain,new belts, good spart, valves are good Can it be a crankshaft sensor?


dear friend-if you are positive that all the repairs were carried out with great care,that the timing is right,and you got spark and fuel,all the valves close propely,then it should start,if the sensor was ok before you stripped the engine why should it be faulty now.

Jun 29, 2009 | 2000 Dodge Intrepid

1 Answer

Timing on a 2000 dodge intrepid


dear friend-if the compression is ok and you have checked the timing and there is spark and feul your vehicle should start.

Mar 17, 2009 | 2000 Dodge Intrepid

Not finding what you are looking for?
1999 Dodge Intrepid Logo

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...