Question about 1999 Chevrolet K1500

1 Answer

Spark plug wires firing order - 1999 Chevrolet K1500

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 270 Answers

Hi: Your Firing order for a V-8 GM Engine is 1--8--4--3--6--5--7--2--
Clockwise rotation.

< Back of Engine >

8 7

6 5

4 3

2 1

Front of Engine Cylindr Locations

This should get you Fixed-Up. To make sure your are starting your #1 Plug in right place on rotor = Pull Coil wire 1st so it won't start== then pull #1 Spark Plug,Then Put your index finger in the #1 Plug hole,Have Someone bump the engine around until Air is pushing your finger out==(STOP) now you are at TDC Top Dead Center ,Pull Distributor Cap off and What ever the Distributors Rotor is Pointing to Should be #1-Start #1 Wire There And Go Clockwise as I gave the Order Its Again 1--8--4--3--6--5--7--2

Hope this gets you started and set your timing and your onthe Way,PLEASE let me Know by Voting for the Quality of my Answer.

Thank You From: D_HUBBS

Posted on Oct 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the Wire Order with distributor?


theres no distributor and the firing order for your 3.8 is 1-6-5-4-3-2-the following link shows the coil pack
Buick General Motor 3800 V6 Engine Firing Order DIS IDI ignition timing 3.8 Buick Engine Coil Pack Firing Order Spark Plug Wire Location Which way do the spark plug wires go on & what cylinder is what?
.
For the Buick V6 231 3.8 liter turbocharged engine:
.
Answers!
.
Firing order:
1 - 6 - 5 - 4 - 3 - 2.
.
Spark plug wire location on coil pack:
.
Closest to the back of the car, left to right: 1 - 5 - 3.
Closest to the front of the car, left to right: 4 - 2 - 6.
.
Spark plug wire location on engine:
.
drivers side, front to back of car: 1 - 3 - 5.
passenger side, front to back of car: 2 - 4 - 6.
.----and this link shows the coil pack to cylinders
.
3 8 Buick Turbo Engine Coil Pack Firing Order Spark Plug Wire Location

Aug 15, 2015 | 1987 Buick Regal

1 Answer

If i have a 1996 chevy cavalier i have the firing order for the spark plugs but need the order for the distributor or ignition coil


Firing Orders
  • Sending Units And Sensors
  • Starting System
  • GM Cavalier/Sunfire 1995-2000 Repair Guide

    FIRING ORDERS

    Print
    See Figures 1 and 2
    To avoid confusion, remove and tag the spark plug wires one at a time, for replacement.
    If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes to reflect how your engine is wired.


    0900c1528003cbe2.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Fig. 1: 2.2L (VIN 4) Engine Firing Order: 1-3-4-2 Distributorless Ignition System

    Apr 16, 2013 | 1996 Chevrolet Cavalier

    2 Answers

    No spark to engine 1991 ford pickup


    It can be faulty or dirty spark plug itselfd.Also for reference get the fuel level checked.Is the fuel tank is empty or near to empty.
    Try cleaning the spark plugs and then see if that is helpin.On some cases the black carbon layer gets collected on the spark plugs and that causes the problem,so cleaning the plugs help.But if its not helping,then spark plug has to be replaced.Spark plugs get power from ignition coil to ignite sparks.If ignitioncoils are faulty then also there will no spark.--------------

    To troubleshot and confirm the issue,i suggest you to go through the help links provided below,check the procedure and it will help you to confirm the issue in your case.
    ----------
    Click the link below:------

    Car cranks, has spark but will not ?

    http://howtobyme.blogspot.com/2011/12/car-crankshas-spark-but-will-not-start.html


    -----------

    The spark plug firing order for car?

    http://schematicsdiagram.blogspot.com/2011/06/spark-plug-firing-order-for-car.html

    ------------

    How to Replace Spark Plugs?

    http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-spark-plugs.html


    ---------------

    How to Perform a Basic Engine Tune Up-Spark Plug and Wire Change

    http://schematicsdiagram.blogspot.com/2011/08/how-to-perform-basic-engine-tune-up_01.html


    ----------

    Car has no spark?

    http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html

    ---------

    How does the spark plug wire go on the distributor cap in 1991 Mitsubishi Mighty?

    http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wires-go-on.html

    ------------
    No spark on 2008 Chevy Avalanche?

    http://schematicsdiagram.blogspot.in/2012/04/no-spark-on-2008-chevy-avalanche.html

    -----------

    How does the spark plug wire go on the distributor cap in 1985 Pontiac sunbird?

    http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wire-go-on.html

    --------------

    Ford Plug Wires Not Coming out?

    http://whoisbyme.blogspot.in/2012/06/ford-plug-wires-not-coming-out.html

    --------

    Ford explorer has no spark?

    http://schematicsdiagram.blogspot.com/2011/12/ford-explorer-has-no-spark.html

    ----------


    Chevy impala spark plug firing order diagrams?

    http://technoanswers.blogspot.in/2012/02/chevy-impala-spark-plug-firing-order.html

    ------------

    How to gap spark plug on Chevy Impala?

    http://technoanswers.blogspot.in/2012/02/how-to-gap-spark-plug-on-chevy-impala.html

    -----------

    Spark plug Replacing for chevy impala?

    http://technoanswers.blogspot.in/2012/02/spark-plug-replacing-for-chevy-impala.html

    Chevy s-10 blazer 4.3l Spark Plug Firing Order?

    http://howtobyme.blogspot.com/2011/12/chevy-s-10-blazer-43l-spark-plug-firing.html

    ----------------

    1982 dodge rampage Spark plugs Firing Order Diagram?

    http://schematicsdiagram.blogspot.com/2011/12/1982-dodge-rampage-spark-plug-firing.html

    ----------------

    2006 Suzuki Forenza Spark plug Firing Order Diagram?

    http://schematicsdiagram.blogspot.com/2011/12/2006-suzuki-forenza-spark-plug-firing.html


    ------------

    1983 Ford Ranger Spark plug firing order?

    http://schematicsdiagram.blogspot.com/2011/12/1983-ford-ranger-spark-plug-firing.html

    --------

    Firing Order for 1991 Lexus ES 250?

    http://schematicsdiagram.blogspot.com/2011/12/firing-order-for-1991-lexus-es-250.html

    ----------------

    Firing order for 1992 Chevrolet 5.0 engine?

    http://schematicsdiagram.blogspot.com/2011/12/firing-order-for-1992-chevrolet-50.html

    -----------

    How to identify number one spark plug on the distributor cap?

    http://schematicsdiagram.blogspot.com/2011/12/how-to-identify-number-one-spark-plug.html

    -----------

    How to remove rear spark plugs on 1991 Buick Regal?

    http://howtobyme.blogspot.in/2012/02/how-to-remove-rear-spark-plugs-on-1991.html


    ---------------

    These details will help.

    Thanks.

    Nov 26, 2012 | Cars & Trucks

    1 Answer

    Spark plugs and wires


    It sounds like the spark plug wires are not plugged into the correct place on the distrubutor. take the distributor cap off and crank the engine over. Make a note of which direction the rotor spins. (Clockwise, or Counterclockwise) then find the firing order for that engine. Sometimes the firing order is on the intake manifold. (if you tell me which engine it has, the 4 cylinder 2.0, or the 6 cylinder 2.5; I could post you the firing order). Now on the distributor cap there is one wire post that has the #1 on it, that would be where you put the spark plug wire from cylinder 1. Following the rotation of the distributor rotor, you would put the spark plug wire for the next cylinder in the firing order after the #1 wire, and so on.

    Dec 11, 2011 | 1998 Ford Contour

    2 Answers

    I took of*** my spark plug wires working on my small block 350 pickup and I don't remember the the firing order to put the new wires back on. Is there a diagram anywhere or is it even that difficult to...


    Next time number each lead before you remove it and no. the dissy cap as well

    The firing order, which should be cast into the intake manifold, for the chevy small block V8 is 1-8-4-3-6-5-7-2. The firing order is the numerical sequence in which the spark plugs are fired. The insertion position of each spark plug wire around the circumference of the distributor cap can be found according to a clock face. The insertion sequence determines the firing order. The firing order is followed clockwise around the distributor cap starting from the 6:30 position with the 6:30 position being the number one cylinder spark plug wire.
    On classic chevy small block engines that use ignition breaker points instead of electronic ignitions, the number one cylinder is the one immediately clockwise of the small metal sash cover on the distributor cap. The firing order starts here. There is no sash cover on the distributor cap for GM HEI electronic ignitions, and the firing order is the same, but starting at the 5:30 position.
    The firing order makes sense if you know how the cylinders are numbered. The number one cylinder is the front most on the drivers side and 2 being the front most on the passenger side. From front to back, the cylinders are odd numbered on the drivers side, and even numbered on the passenger side.
    See the diagram; Click to open a printable larger image in a new window. The firing order starts with the number one cylinder. We would connect the number one spark plug wire to the distributor cap terminal in the 6:30 position. distributor.pngSince the next cylinder in the firing order is 8 (passenger side rear), we connect the number 8 spark plug wire to the next distributor cap terminal (approximately 7:30 position) in the clockwise direction from number one. You need to be sure you continue the firing order in the clockwise direction around the chevy small block distributor cap from the last installed spark plug wire. Setting the rest of the firing order is just a matter of repetition. Be sure to count the spark plugs from front to back on each side of the motor to identify the correct cylinder number in the firing order.

    Jun 21, 2010 | Cars & Trucks

    1 Answer

    Firing Order diagram for 2006 Ford Explorer


    Hope this helps. The ignition coil:
    • changes low-voltage pulses from the PCM to high-voltage pulses.
    • fires 2 spark plugs simultaneously.
    • has 3 transformers.
      • One transformer fires the spark plugs for cylinders 1 and 5
      • One transformer fires the spark plugs for cylinders 2 and 6
      • One transformer fires the spark plugs for cylinders 3 and 4
    Spark plug wires:
    • carry high-voltage pulses from the ignition coil to the spark plugs.
    The spark plugs:
    • change high-voltage pulses to spark at the gap, which ignites the fuel and air mixture.
    The firing order is 1-4-2-5-3-6.

    69efa96.jpg

    Jun 06, 2010 | 2006 Ford Explorer

    1 Answer

    I need the diagram to put the spark plug cables


    2003 Chevrolet Malibu 3.1L SFI OHV 6cyl
    Spark Plug Wires - Removal & Installation

    3.5L Engine
    1. Before servicing the vehicle, refer to the Precautions Section.
      NOTE Twist the spark plug boot one-half turn in order to release the boot. Pull on the spark plug boot only. Do not pull on the spark plug wire or the wire could be damaged.
    2. Remove the intake manifold cover, if required.
    3. Disconnect the left side spark plug wires from the spark plugs.
    4. Disconnect the left side spark plug wires from the ignition coil.
    5. Remove the spark plug wire clips from the Manifold Absolute Pressure (MAP) sensor bracket and the heater inlet and outlet pipe tab.
    6. Remove the spark plug wire assembly.
    7. If replacing only one plug wire, open the retaining clips and remove the appropriate spark plug wire.
    8. Disconnect the right side spark plug wires from the spark plugs.
    9. Disconnect the right side spark plugs from the ignition coils.
    10. Remove the spark plug wire assembly.
    11. If replacing only one plug wire, open the retaining clip and remove the appropriate spark plug wire.
    To install:
    1. Install the spark plug wire assembly.
    2. Connect the right side spark plugs to the ignition coils.
    3. Connect the right side spark plug wires to the spark plugs.
    4. If replacing only one plug wire, open the retaining clip and install the appropriate spark plug wire.
    5. Install the spark plug wire assembly.
    6. Connect the left side spark plug wires to the spark plugs.
    7. Connect the left side spark plug wires to the ignition coil.
    8. Install the spark plug wire clips to the MAP sensor bracket and the heater inlet and outlet pipe tab.
    9. If replacing only one plug wire, open the retaining clips and install the appropriate spark plug wire.
    10. Install the intake manifold cover, if required.

    Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
    74d742b.jpg


    Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
    306b531.jpg


    Fig. 3.5L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
    9313fa7.jpg


    Fig. 2.4L Engine Firing order: 1-3-4-2 Distributorless ignition system
    2c9af72.jpg


    Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
    d929c16.jpg


    Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
    f357cd3.jpg

    Fig. 3.5L & 3.9L Engines Firing order: 1-2-3-4-5-6 Distributorless ignition system
    09e9db9.jpg

    I really hope help you with this (remember rated this help) Good luck.

    Sep 23, 2009 | 2003 Chevrolet Malibu

    1 Answer

    1984 pontiac bonnerville plug firing order photo


    Hi,
    I don't know your engine size, but the link below is a picture of the GM small block firing order with distributor.
    The firing order, which should be cast into the intake manifold, for the chevy small block V8 is 1-8-4-3-6-5-7-2. The firing order is the numerical sequence in which the spark plugs are fired. The insertion position of each spark plug wire around the circumference of the distributor cap can be found according to a clock face. The insertion sequence determines the firing order. The firing order is followed clockwise around the distributor cap starting from the 6:30 position with the 6:30 position being the number one cylinder spark plug wire.

    http://www.classiccarauto.com/impala/how_to/images/distributor.png

    Hope this helps...

    Aug 27, 2009 | 1984 Pontiac Bonneville

    1 Answer

    Need a diagram of the firing order of spark plug wires from coil packs to spark plugs


    FROM LEFT TO RIGHT, 5/2 3/6 4/1. ASSUMING YOU HAVE THE 3.1L ENGINE.

    May 31, 2009 | 1998 Chevrolet Lumina

    Not finding what you are looking for?
    1999 Chevrolet K1500 Logo

    223 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Ronny Bennett Sr.
    Ronny Bennett Sr.

    Level 3 Expert

    6924 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...