Question about 2001 Kia Sportage

1 Answer

Windows will not go up or down, Not the fuse, and

Windows will not go up or down, Not the fuse, and the switch.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 50 Answers

Remove door panel and get a mulimeter on the window motor should b 12 v if it's ok then it req a new motor. Spray some wd40 on it and bang it it might free off

Posted on Oct 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Tried it today and none of the windows work from master switch on drivers side except ft passenger window, which went down but will not go back up.


You can't put up the front passenger window with it's own switch ? Did you check the POWER WINDOW RELAY in the instrument panel fuse / relay box ? An you checked POWER fuse 30amp same fuse box ? All window switches have direct power from power window relay !
Fuse Block - Instrument Panel
Left of the Steering Column, behind the storage Compartment
P/W Relay
--
Sunroof Switch Assembly, Window Switch - Left Front, Window Switch - Left Rear, Window Switch - Right Front, Window Switch - Right Rear

Apr 02, 2015 | 2003 Pontiac Vibe

1 Answer

No power to my front windows all fuses are good


check that the switch that locks the window switches is on. It is a small switch not far from the switch set in the drivers door.

Feb 18, 2014 | 2000 Pontiac Montana

1 Answer

The windows on my crv wont work


at all stations?
all fuses, in both boxes. (did you read the operators guide to find them,
some cars have a circuit break (thermal) for windows,
and is located in the fuse box.
all this info is at alldata.com
ill look. ill respond , as you are a pro DIY person, can read schematics. if not , its just a guessing game.
IT IS a FUSE, not a breaker. but each motor in door has CB.
UNDER HOOD 40am Fuse #13
then fuse 23 underdash and fuse 8 same.
then the relay.same place.
and the relay is controlled by, master station (drivers)
the driver location doesnt need the relay to work.
the relay feeds power to all other window controls
so the master station is unique.
log in to alldata.com and see the pages on power windows.
here are some tid bits.
battery pull warning

Resetting the power window control unit is required after performing the following procedures: Disconnecting the battery, Removing the No. 6 (7.5 A) and/or the No. 23 (20 A) fuses from the under-dash fuse/relay box or disconnecting the driver's door wire harness.
and
window relearn/reset.
Control Unit Reset
  1. Turn the ignition switch ON (II).
  2. Move the driver's window all the way down by holding the driver's switch firmly down; when the window reaches the bottom, hold the driver's window switch firmly down for 2 seconds.
  3. Move the driver's window all the way up by holding the driver's switch firmly up; when the window reaches the top, hold the driver's window switch firmly up for 2 seconds.
  4. If the window does not work in AUTO, turn the ignition switch OFF and repeat the procedure.
  5. Check the window and power door lock operations

Jan 12, 2014 | 2006 Honda CR-V

1 Answer

My 96 Toyota Camrys windows don't go down or the


You need to see a wiring diagram to see how the ignition switch allows or sends power to that 30 amp fuse. The switch may turn on a relay (maybe the ignition relay) that sends power to the fuse panel. Or the run wire out of the switch may itself turn power on at the fuses. You may have a loose connection behind the fuse panel.
Get a test light, pull the fuse, and check for power at the fuse terminals, with key on. One terminal for the fuse should have power. If not, power is lost between the ignition switch and that fuse. If it does have power, and windows still don't work, check the wire from fuse panel to the master switch-loose or poor connections, maybe a partially broken wire. If it looks good, check the ground wire for the windows. The ground wire originates at the master switch and will go back into the cabin to a nearby ground, possibly behind the left kick panel. If still no help, someone may need a volt- ohmmeter to start checking continuity of wires, voltage drops, etc.

Jun 18, 2013 | Cars & Trucks

1 Answer

My windows won't go down or up, my fuse gets super hot when i turn on the engine, i changed the switches on all the windows and and the 30 amp fuse what can i do now. do i need to change the windo


If all of them don't work after changing the switches and the fuse gets supper hot you need to double check your work. It sounds like you put a short some where in your circuit . The other thing is to check the switches with an ohm meter. This is to see what the switch is doing. Normally open or normally closed. If by accident that the factory gave you a bad part such as a short in the switch. I am assuming that the only way to hook up your switch is with the socket that came with the car. Your not plugging in each wire to the switch block.

Frank
Primeonly27

Feb 03, 2012 | Cars & Trucks

2 Answers

Power windows stopped working and replaced the main switch but still not working . where is the fuse for the power windows?


Locate the fuse panel just to the left of your steering wheel, facing the driver's side door.

  • 2 Open the panel by pulling the cover outward. Look at the fuse listing on the inside panel of the fuse box to identify the location of the fuse you wish to replace. The location and amperage of each fuse varies slightly between all Ford Explorer models, so it's important to check the corresponding number listed on the inside fuse panel.
  • 3 Use the fuse puller in the fuse box and carefully remove the fuse for the electrical malfunction you're experiencing. Examine the fuse to see if it's blown, represented by a burned-out wire. Compare it to another fuse that works if you're are unsure.
  • 4 Discard the blown fuse and replace it with one of the same amperage. The amperage for each fuse is listed on the inside cover of the fuse box.
  • 5 Replace the fuse puller and cover the fuse box. Start your Ford Explorer and check to see that the electrical issue is resolved.
  • Sep 24, 2011 | 2003 Ford Explorer

    1 Answer

    1998 Toyota Camry passenger window and rear windows willnot roll down. Drivers side is ok. Don't have an owners manual so I don't know where the fuse box is to check if it's a blown fuse. Could this be...


    look on the drivers master control switch for windows,there should be a lock mode switch,this will lock windows when pushed down and when pushed again,allows windows to work,this is probably the problem,or master switch is bad,also can windows be used with the other switches in car?if not you probably have it locked on master switch

    Dec 24, 2010 | Toyota Camry Cars & Trucks

    1 Answer

    Windows wont roll up and down and hazard continues to click even when not on.


    These are two separate issues.The most common cause of the clicking is the hazard switch located above the radio.Replacing this generally takes care of that issue occassionally it is a malfunction in the turn signal switch but most likely the hazard switch. If all windows are affected would check fuses first.If the windows roll down from the corresponding switches example rf allows rf to roll down. If not suspect an electrical issue such as fuse or relay.If they do roll down from the switches on the doors but not the drivers door possible a master switch issue.Drivers door contains a master switch that controls all windows.Do the windows work at all?

    Jun 06, 2010 | 2000 Pontiac Grand Am GT

    1 Answer

    Possible window fuse blown?


    if the fuse is blown none of the windows will work,it sound wierd but all the power to the window motors runs through the drivers side switch. the drivers side switch may be your culprit.to be sure check to see if you have power goin in to the other switches before you replace the drivers side switch.

    Jul 31, 2008 | 2002 Toyota Sequoia

    Not finding what you are looking for?

    Open Questions:

    See all 2001 Kia Sportage Questions

    2001 Kia Sportage Logo

    Related Topics:

    91 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Kia Experts

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    yadayada
    yadayada

    Level 3 Expert

    76132 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8273 Answers

    Are you a Kia Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...