Question about 1995 Honda Accord

1 Answer

My brake lights are not working, My light turn on, my blinkers work, emergency lights flash, but nothing happens when I press on my brakes?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 50 Answers

Sounds like a brake pedal switch fault take the switch of the brake pedal and remove connection , bridge the two wires and check if the b lights are working if so change the switch. If not check the bulbs

Posted on Oct 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights not working


check brake pedal switch for conductance and check all fuses again. I unhooked trailer once and blew out a fuse that was independent of the brake light... If you have blinkers working it narrows it down. Check emergency flashers to see if thats working.

Jul 29, 2015 | 2011 Ford Ranger SuperCab

2 Answers

My brake lights and rear blinkers are not working. I have replaced the bulbs in both brake lights. What next?


most blinkers uses relays, and when they flashes fast one light is out, but you replaced your burnt bulb might be a bad relay.

Sep 17, 2012 | 2007 Hummer H2 SUT

1 Answer

1995 GMC Jimmy brake lights not working


Brake lights run through the hazzard switch. There are known problems with this, and the multifunction switch. You may need to buy a new hazzard switch and OR the multifunction switch. Before you do that, check the pigtail that goes into the brake switch up by the fender, make sure it's not shorting out up there. Happened to me!

May 06, 2017 | 1995 GMC Jimmy

3 Answers

Have a Chevy Corsica 1996. Blinkers not working right. When I step on brake the arrow on instrument panel for the right blinker lights up. When use left blinker, both flash like the flashers are on. ...


It sounds like a bad light socket. The brake light and the parking/running/regular part of the socket are shorting out. When you press on the brake petal it's shorting out on the turn signal and sending current to the indicator (arrow) on the dash.. When you use the blinker, it's shorting with the brake light and causing them both to flash...

Check the socket and get back to me with the result.

Mar 14, 2010 | Chevrolet Corsica Cars & Trucks

1 Answer

1989 chevy 1/2 ton.brake lights or emergency flashers dont work.tail lights an blinkers work.


The Blinkers and the Brake Lights are the same bulb. So check the brake light switch. Flashers use a different flasher unit, than the turn signals

Dec 16, 2009 | 1989 Chevrolet K1500

1 Answer

No brake lights or turn signals


Try changing your wires. from lights to blinker

Oct 13, 2009 | Cars & Trucks

2 Answers

Pressing brake causing blinker issue


The trailer harness that was installed probably has a short inside the box that distributes power to the trailer pig-tail. Remove the trailer harness. You problem will be cured.

Jan 27, 2009 | 1999 Toyota 4Runner

1 Answer

I have a chevy Silverado with a tow hitch package. I'm try ing to wire in a new hitch because the last one got smashed, I can isolate the right and left blinkers and the brake lights, but on a 4 slot flat...


I can't look up your wiring diagram because I don't know model year?
On some makes and models, the lower brake lites are wired through the multifunction switch. Your turn and stop use the same bulb filament, just not at the same time. On a left turn, the left turn signal works, but the brake lite on the left doesn't. Now, the brake lamp on the right does work. The high mount brake lite also will work. The highmount brake lite is usually wired differently than the lower brake lites.
W/o being able to look at wiring diagram, I don't know if my info is applicable on your vehicle? I need model year.

May 05, 2017 | Chevrolet Silverado 1500 Cars & Trucks

Not finding what you are looking for?
1995 Honda Accord Logo

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...