Question about 1990 Chevrolet Suburban

1 Answer

How do I disassemble a 1990 Chevy Suburban tilt steering column? Do you have a diagram that I can look at with instructions? Also once I disassemble it how do I put it back together? ( diagram & instructions)

Posted by on

  • 1 more comment 
  • coletk8 Oct 05, 2010

    Hi, the information I recieved didn't really help probably because I didn't expliain what exactly what is the problem I am having. (why I am taking the steering column apart) The tilt was loose, The steering wheel moved side to side athe the tilt locatin which was right above the gear shift lever bowl. I removed the housing support but its still got movement on the gear box side of the lock plate. Could it possibly be the lower bearing next to the gear box? If you have any suggestions could you please let me know & have any diagrams & explanations? Thank you, Colette King

  • coletk8 Oct 05, 2010

    my email is coletk8@aol.com but I guess I didn't explain the problem I am having, why I had to take the steering wheel column apart so if I could explain it to you maybe I could get the proper help I need. Thanks, Colette

  • coletk8 Oct 05, 2010

    I just emailed you, did you recieve it? what does kbron stand for? (so I know what to call you) Like I said in my last email you can contact me at coletk8 at aol dot com so hopefully I will hear from you real soon. Thanks again, Colette

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,796 Answers

Hi!!
Click on the link to get access to the information you requested, once you uninstall one component, ie. steering wheel, select from the SELECT A CHAPTER menu, on the left of the screen, the next component to uninstall. http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0900c1528008f5f5
Good Luck!! Don't forget to rate this post!!

Posted on Oct 04, 2010

  • Rene J Solis Oct 05, 2010

    I am going to send you info and diags. but I am going to need an email address to send them to, this site only allows images smaller than 150K Thanks

  • Rene J Solis Oct 05, 2010

    JUST CHECKING IF YOU GOT THE DIAGRAM AND INSTRUCTIONS???

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello, thank you for helping. I have a 1990 Chevy truck C1500 with a broken steering column that is a tilt, and I have a floor shift. I found a 1990 Chevy truck C1500 tilt steering column from a standard....


if you have a floor shift and the replacement has a colum shift..you can use the colum and remove the pin that holds the shift arm on..it comes out with a pin remover .. just tap it down and out..the arm slides out..then use as normal..

Dec 27, 2013 | GMC C1500 Cars & Trucks

1 Answer

I need a detailed schematic of a 1990 ford f250 steering wheel column that includes directions for disassembly and reassembly


Go back to the dealer ,chat the storeman up nicely and he will print you off the parts picture so you some idea where it goes ,this vehicle is so oil that nothing is complicated about this motor as i repaired a 350 1989 model last week and apart from getting the plugs out after they had been in for 15 yrs their was nothing i found difficult ,just big and heavy with its twin rear wheels and a complete brake rebuild as well .Still think a ford transit diesel is a better motor though because at our fuel prices here in europe ? need i say more

Mar 30, 2012 | 1990 Ford F250

1 Answer

1988 chevy truck w/tilt steering column need disassembly instructions or diagram to replace muti function wiper switch


This can be found in the Hanes repair manual that you can get at any auto parts store, Auto Zone, step by step with photos. Not a hard job but you will new a steering wheel puller to get the lock ring out and the wheel off.

Feb 19, 2011 | 1988 Chevrolet C1500

1 Answer

I am looking for a column shift "housing support" for a tilt steering wheel for my 1990 Chevy Suburban


Hello. Your best bet is to call your local salvage yard, or auto junk yard and they will get one for you. J.

Oct 05, 2010 | Chevrolet Suburban Cars & Trucks

1 Answer

I disassemled the tilt steering wheel to my 1990 Chevy Suburban because the tilt was loose. The steering wheel moved side to side at the tilt location which was right above the gear shift lever bowl. I...


You will have to remove the lock plate and the turn signal plastic assembly, from inside the column housing, in order to access and tighten up the three hex screws that have come loose, allowing the tilt column to move side to side. I have done this numerous times, in the mid 90's, when the 80's GM tilt columns started to come loose with age. The hardest part is getting that lock plate off, and replacing it, if you don't have a lock plate puller, so make sure you have one or else get one, as it will save you lots of time and fustration. Good luck.

Oct 05, 2010 | 1990 Chevrolet Suburban

1 Answer

Removal of steering colum on 88 chevy suburban. Loose tilt wheel?


U can do this repair in the car, it is harder but take your time and follow the EXCELLENT instruction's at the web link below, this guy who posted this is GREAT!!
http://www.chevyasylum.com/column/tiltcol.html

Sep 23, 2010 | Chevrolet Suburban Cars & Trucks

1 Answer

1990 chevy gladiator van steering column has came loose. It is floppy, how and what is the best way to correct this.


I will assume you really have a G10-20-30 van.(half/ 3/4 or 1 ton full size van)
The fifth digit of your vin should be a G.
Not the 2wheel drive pickup indicated.
That being said, your Gadiator is an aftermarket conversion van with a loose column.
This would have to be a loose tilt bowl on the steering column.
After removing the steering wheel and lock plate, you will find four inverted torx bolts that hold the tilt bowl to the column. Two will be backed way out and loose.Remove these bolts and appy loc tite to the bolt threads, then reassemble.

Feb 24, 2010 | 1990 Chevrolet C1500

1 Answer

1990 chevy suburban. The key was turned to auxillary and stuck


hopefully that does not have tilt steering which makes the job somewhat more difficult. the same thing happened with a van i owned. there are small arms inside the steering column that move with the key to move the ignition switch.
to confirm it is broken locate the ignition switch on the column. remove it then turn the key. if the piece that normally moves that switch doesn't... than it is broken.

first unhook the battery.

about the only way to get at it is to remove the steering wheel. there are more parts behind that that have to be removed. then you will get to what is basically and end cap. remove that and slide out the parts and install the new arm(s) mine was a 2 piece.

basically you just need to bolt it back up and reinstall the key cylinder and you are good to go. hook up the battery again and you should have a working vehicle.
the tilt springs can be held together with a c clamp. it is tricky but you will see as you attempt it.

Nov 28, 2009 | 1990 Chevrolet Suburban

Not finding what you are looking for?
1990 Chevrolet Suburban Logo

973 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...