Question about 2001 Toyota Sienna
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Engine Air Filter
The engine air filter is located in the box behind the battery. This box should have 4 metal clips that pop off and you and pick up the top of the box and underneath is the filter.
Posted on Mar 01, 2009
SOURCE: cabin Air Filter
Open the glove box
Remove all of the contents in the glove box
On the right side, dis-engage the rod going to the split plastic pin on the glove box door
Squeeze both other sides of the glove box to defeat the stops that keeps the glove box from falling open
Observe the box in the area vacated by letting the glove box drop down, this is the heater box
Locate a rectangular cover (approx 7 " x 2"), it is located on the face of the box; facing you.
Pull this cover out towards you, the cabin air filter is located in the tray that is connected to this rectangular cover.
This should help you replace it.
Posted on Oct 20, 2008
1) Turn off the ignition switch while leaving the wipers in the up position. 2) Open the hood and properly secure it in the open position. 3) Gently pull the rubber cowl seal away from the cowl vent screen. Place your hand underneath the right half of the cowl vent screen and lift straight up, thereby releasing the four spring clips and removing the right half of the screen 4) Remove the water shield. Carefully disengage the two water shield locking tabs and slide the water shield toward the front of the vehicle, lifting the water shield up and away from the vehicle 5) Remove the Passenger Compartment Air Filter, being careful not to allow debris or loose components to fall into the filter housing. Replace the Passenger Compartment Air Filter with a fresh filter and reverse the above procedures to reassemble the vehicle components. �
I am not sure what time in the year your 2001 Avalon was built but her is the procedure that I just followed: 1. Open glove box and remove contents 2. Remove the three philips head screws along the top inside frame of the glove box. 3. Remove the hex head bolt in the lower right and Philips screw in the lower left side of the glove box frame. 4. Unlatch the black cover plate from the roof of the glove box. This holds an electrical connection and will need pushed up through the hole when the entire box is removed. 5. Pull on the top left side of the glove box to release the pop tab. Repeat on the right side. 6. Carefully lower the glove box assembly. 7. Disconnect the electrical connection to the trunk disable button 8. The entire glove box can now be removed from the area. The door gear assembly does not come off of the box and is easily damaged if attempted to do so. 9. The Cabin Air Filter assembly has a white cover. Pop the tabs on the right and left side and slide the assembly out. 10. Replace the filter in the assembly. Make sure the airflow indicator points down. 11. Re-Install Air Filter assembly. 12. Re-Install the electrical connections remembering to slide the one through the hole in the top of the glove box. 13. Push glove box assembly on pop tabs. 14. Re-Install screws and bolts. 15. Reconnect the black cover plate to the top of the glove box.
Posted on Jan 08, 2010
The cabin air filter is actually pretty easy to change. Here are the steps:
As for the toyota cabin air number im not to sure on that but you can go to any parts store and pick up an aftermarket cabin air which will save you a bit of money, same quality..
Posted on Apr 21, 2010
Tips for a great answer:
Jul 15, 2014 | 2001 Toyota Tacoma
Dec 14, 2009 | 2001 Mazda Tribute
Dec 05, 2009 | 1998 Toyota Camry
Jun 30, 2009 | 2008 BMW 528i Sedan
Jan 25, 2009 | 2004 Mazda MPV
453 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: