Question about 1994 Jeep Cherokee

1 Answer

1994 jeep what do you need to remove to replace a headlight switch on a jeep cherokee thanks

Posted by on

  • jards May 28, 2008

    headlight swich not bulb

  • jards May 29, 2008

    to remove switch first remove surround then the speedo tach and go thru the hole

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 46 Answers

There should be a metal square ring provided it is a sealed beam headlight this ring will have 4 screws holding it in place just undue these screws and remove the connector and replace. If it is not a sealed beam you will have to go under the hood to the back of the headlight and there will be a round screw on holder just grab it and turn it untill it comes off pop the bulb out and replace with the new one hope this helps

Posted on May 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Radiator change 1994 cherokee


    images for Radiator change 1994 cherokee


    More images for Radiator change 1994 cherokee

    Radiator. Replacement - Jeep Cherokee Forum

    www.cherokeeforum.com > Technical Discussion > OEM Cherokee Tech
    Nov 2, 2010 - Jeep Cherokee XJ 1984 to 1996 How to Replace Radiator .... 1994 JeepCherokee 4x4 5 speed 4.0 H.O. flex headers, Flowmaster cat back, ... Changing out lower radiator hose...
    Jul 6, 2011
    Replacing Radiator
    Apr 8, 2011
    RAdiator removal question
    Feb 19, 2011
    Replacing radiator on 1996 Cherokee
    May 19, 2010
    More results from www.cherokeeforum.com

    93 jeep grand cherokee(4.0) radiator needs to be replaced ...

    www.jeepforum.com > ... > ZJ Grand Cherokee Forum

    Sep 23, 2007 - 12 posts - ‎9 authors
    Remove the top radiator bracket and the whole thing will slide out. IF you have .... What I Have: 1994 Grand Cherokee Limited 2.25" 4 Wheel ...

Jan 23, 2016 | 1994 Jeep Grand Cherokee

2 Answers

How do i install the welts on the front light assembly of my 1994 jeep grand cherokee laredo?


If by "welts" you mean some kind of plastic or rubber trim, clean area with 3M adhesive cleaner, then use 3M Black weather strip adhesive.

Dec 10, 2014 | 1994 Jeep Grand Cherokee

1 Answer

How can I disable jeep grand cherokee security system


Hi Andrew:
The 1994 Jeep Grand Cherokee Laredo Anti-Theft System is equipped with Vehicle Theft Security System (VTSS). VTSS system monitors vehicle doors, hood, liftgate and ignition. If an attempt is made to enter or operate vehicle without proper disarming of system, vehicle horn will sound, headlights, taillights and parking lights will flash, and engine will be prevented from running. I have an '93 GC 5.2L V8...

The following wiring diagram and electronics circuit contains detail schematics of The 1994 Jeep Grand Cherokee Laredo Anti-Theft System. Herein you will find interconnection between electronics parts of the system such as body control module, auto headlamp light sensor. VTSS led, driver door module, passenger door module, cylinder lock switch, junction block, power distribution center, and grounding. Herein you will learn also how the Vehicle Theft Security System works, removal, installation, testing and troubleshooting procedures.

Try HERE and also, remember that here can find the Jeep Grand Cherokee Service Repair Manual.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Nov 25, 2011 | 1994 Jeep Grand Cherokee

1 Answer

94 Grand Cherokee Laredo. I need to replace the headlight assemblies.


Open the hood of the Cherokee. Above the headlights are one bolt to each headlight. This holds the headlight in place. Removed the bolt. Then just pull out the headlights straight forward. There are clips that hold the headlight to the inner panel.

Dec 29, 2010 | 1994 Jeep Grand Cherokee

1 Answer

I am replacing my headlights in my 1994 jeep grand cherokee laredo and successfully removed the right headlight, but now i cannot get the replacement on, how do i get it on?


Mine were hard to put on also. We wound up putting some vasoline on the connection and then pressing it on the best we could. Replacement headlights may have come from china and the plastic may not exactly be the same. Good luck

May 15, 2010 | 1994 Jeep Grand Cherokee

1 Answer

Headlight switch on 95 jeep cherokee


Pretty sure there's a nut around the front where the shaft goes in, you may need to remove bottom panel to get your hand behind, then push small button on switch to disengage the shaft.

Jul 19, 2009 | 1989 Jeep Cherokee

1 Answer

1994 Jeep cherokee am/fm radio backlight lamp is out and AC/Heat dash lamp is out


There is a tiny little peanut shaped light bulb inside the radio that provides the light for the dial, it is replaceable, you will need to remove the radio, then pull the top cover off the radio chassis, the bulb is under the cover.

Nov 07, 2008 | 1994 Jeep Grand Cherokee

1 Answer

Headlight switch


4179874341798744Make sure you have a good headlight switch make sure you have power on the switch connector coming out to all the circuits

Jul 20, 2008 | 1994 Jeep Cherokee Country

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...