Question about 1999 Pontiac Grand Am GT
Heres a diagram, useing a rachet release tension by pulling tensioner up, hold and remove belt,you can release tension after removing belt from one pulley then install the belt leaving one belt off one pulley then release tension to finish the install, hope this is helpful, good luck.
Posted on Oct 04, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 28, 2015 | 1999 Oldsmobile Cutlass
Jul 27, 2014 | Cars & Trucks
Nov 26, 2011 | 1999 Jeep Grand Cherokee
Park the Pontiac in a safe work area and open the hood.
Inspect the top of the black plastic cover that surrounds the fan for the serpentine belt routing diagram. This diagram has the instructions for installing the new serpentine belt around the accessory pulleys.
Inspect the front of the engine and locate the automatic belt tensioner. The tensioner on the 1999 Pontiac model vehicles is located between the alternator and the crankshaft pulley. The tensioner has a pulley on one end with a bolt head in the center of the pulley. Use the bolt head to rotate the tensioner.
Turn the tensioner counterclockwise with the breaker bar and a metric socket. Pull the belt out from under the tensioner pulley with your other hand. Then, slowly let the tensioner retract until it stops.
Pull the belt out of the other remaining pulleys. Then, pull the belt out of the engine bay and lay it on the ground.
Route the new belt around the crankshaft pulley. Then, route the new belt around the other remaining pullleys by using the serpentine belt routing diagram for instructions.
Rotate the tensioner pulley counterclockwise with the breaker bar and socket. Then, slide the new belt under the tensioner pulley. Slowly let the tensioner retract until it stops. The tensioner pulls all of the slack out of the belt and brings the new belt to the proper tension. Remove the breaker bar and socket from the tensioner pulley.
Inspect the new belt to ensure that it is seated inside of all the accessory pulleys as directed by the diagram. Then, crank the engine and allow it to run for about 15 seconds. Turn the engine off. Inspect the belt again once more to ensure that
the belt is still around each pulley. Close the hood.
May 22, 2011 | 1999 Pontiac Grand Prix
May 16, 2010 | 1999 Jeep Grand Cherokee
Sep 29, 2009 | 2003 Mercury Grand Marquis
Dec 23, 2008 | 1999 Pontiac Grand Am GT
Nov 09, 2008 | 1999 Pontiac Grand Am GT
Jun 27, 2008 | 1993 Dodge Caravan
2,160 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: