Question about 1996 Subaru Legacy

1 Answer

Where is #1 cylinder on 1996 subaru 2.2 sohc engine? thanks John

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 834 Answers

The #1 cylinder is located at the front spark plug on the right or passenger side of the engine, and here is a firing order diagram to help assist you.


where is #1 cylinder on 1996 subaru 2.2 sohc - a5b41bb.jpg

Posted on Oct 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 subaru no spark


check distributer cap

Jan 12, 2013 | 1996 Subaru Legacy

1 Answer

Need civic 92 sohc spark firing order diagram


Hi The firing order for this honda is 1 3 4 2
Cylinder 1 is the drive pulley end of the engine.
the distributor rotates clockwise
I hope this is enough information for you
John ( South Wales UK )

Jun 20, 2011 | Honda Civic Cars & Trucks

1 Answer

I know where the sensor 2 is but where is the bank 1 for my 1999 subaru forrester code PO 141 O2 sensor heater bank1 sensor 2?


For 1999 Subaru Truck Forester AWD 2.5L MFI 4cyl the Oxygen Sensor is located under hood, center, rear engine area, mounted on catalytic converter.

zjlimited_1032.jpg

Fig. Oxygen sensor location-Forester 1998-2002 2.5L SOHC engine (click over image for zoom).

Generally, Bank 1 is front and Bank 2 is rear.

Hope helps.

Apr 14, 2011 | 1999 Subaru Forester

2 Answers

How do I replace the CAM sensor on a 1996 dodge neon?


Hi, my name is John I will do my best to assist you.

To Remove
  1. Disconnect the negative battery cable.
  2. Disconnect the filtered air tube from the throttle body and air cleaner housing.
  3. For SOHC engines, remove the air cleaner inlet tube.
  4. For SOHC engines, detach the electrical connectors from the engine coolant sensor and the camshaft position sensor.
  5. For DOHC engines, unplug the electrical connector from the camshaft position sensor.
  6. For SOHC engines, remove the brake booster hose and the electrical connectors form the holders on the end of the cylinder head cover.
  7. Unfasten the camshaft position sensor mounting screws, then remove the sensor.
  8. Loosen the screw/bolt attaching the target magnet to the rear of the camshaft.
To Install: NOTE: The target magnet has 2 locating dowels which fit into the machined locating holes in the end of the camshaft.

  1. Install the target magnet in the end of the camshaft. Tighten the retainer to 30 inch lbs. (3.4 Nm).
  2. Install the camshaft position sensor. Tighten the sensor mounting screws to 80 inch lbs. (9 Nm).
  3. For SOHC engines, place the brake booster hose and the electrical harness in the holders on the end of the valve cover.
  4. Attach the electrical connector(s) to the camshaft position sensor and coolant temperature sensor (if necessary).
  5. Install the air cleaner inlet tube and the filtered air tube.
  6. Connect the negative battery cable.
The camshaft position sensor is mounted to the rear of the cylinder head - SOHC engine shown


tecnovative_139.gif
Location of the camshaft position sensor - DOHC engine shown

tecnovative_140.gif

Unfasten the retaining bolt, then remove the target magnet from the rear of the camshaft - SOHC shown, DOHC similar

tecnovative_141.gif

The target magnet has 2 locating dowels for proper alignment during installation

tecnovative_142.gif

Feb 20, 2011 | 1996 Dodge Neon

1 Answer

1996 dodge stratus firing order spark plugs


For the 1996 Dodge Stratus:
I do not know if you have the 2.0L SOHC In-Line 4-Cylinder, or the 2.4L DOHC In-Line 4-Cylinder or the 2.5L SOHC V6; however I have included all three below...

For the 2.0L SOHC AND 2.4L DOHC In-Line 4-Cylinder:
Firing Order:
1-3-4-2
Cylinders:
..........(back).........
|...1....2....3....4...|
.........(front)
Ignition Coil:
.....................o <---4
1---> o
.....................O <---Connector
2---> o
.....................o <---3

For the 2.5L SOHC V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
.......(back).......

|...1....3....5...|
.......................
|...2....4....6...|
.......(front)
Distributor:
.......(back)
....(+)....5
..4...........3
2
....6.........1
...........(+)-screw

Let me know if this helped......

May 17, 2010 | 1996 Dodge Stratus

1 Answer

Need to know the firing order for a 96 dodge avenger


For the 1996 Dodge Avenger:
I do not know if you have the 2.0L DOHC In-Line 4-Cylinder or the 2.5L SOHC V6; howvwere I have included both below...

For the 2.0L DOHC In-Line 4-Cylinder:
Firing Order:
1-3-4-2
Cylinders:
..........(back).........
|...1....2....3....4...|
.........(front)
Ignition Coil:
.....................o <---4
1---> o
.....................O <---Connector
2---> o
.....................o <---3

For the 2.5L SOHC V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
.......(back).......
|...1....3....5...|
.......................
|...2....4....6...|
.......(front)
Distributor:
.......(back)
....(+)....5
..4...........3
2
....6.........1
...........(+)-screw

Let me know if this helped......

May 12, 2010 | 1996 Dodge Avenger

1 Answer

I am looking for the firing order on a 1996 honda accord ex 2.2 litre f22b2 motor


For the 1996 Honda Accord 2.2L SOHC In-Line 4-Cylinder:

Firing Order:
1-3-4-2

Cylinders:
.......(back)......
|..4...3...2...1..|
.......(front)

Distributor:
..(back)
.....4
3........2
.....1
.(front)

Let me now if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Apr 23, 2010 | 1996 Honda Accord

2 Answers

2001 Subaru Legacy GT 2.5L SOHC


Yes, the block is the same if you are putting in a SOHC.

Sep 09, 2008 | 1997 Subaru Outback

Not finding what you are looking for?
1996 Subaru Legacy Logo

1,537 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...