Question about 2000 Oldsmobile Intrigue

1 Answer

Starter spins but wont crank motor put two different starters and does same

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 50 Answers

Remove the starter and inspect the teeth on the flywheel if the teeth are worn the transmission will req removing and a new flywheel fitting try putting the vehicle in gear and rocking it this will turn the engine and change the position of the flywheel then try to start

Posted on Oct 04, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

When trying to start my car its making a shinning noise and wont crank what could it be?

I assume you are referring to spinning sound, which is starter motor, and not knowing what model vehicle you are talking about, all I can do is give general idea what is wrong. 99% of the time it is your bendix drive on starter motor which is a solenoid activated gear which engages your starter motor with fly wheel gear. It is a pretty easy fix depending on car, sometimes it is the connection on starter, so check connection for corrosion, try tugging on it. Good luck.

Mar 03, 2016 | Cars & Trucks

2 Answers

Why is the car not starting

not enough voltage in the battery to turn the engine over.

Sep 07, 2014 | 2011 Toyota Camry

4 Answers

Turn key get nothing jump starter and sylenoid just spins

i cant dope out that symptoms.

does it crank or not. be clear there.

no car starts (but my 6sp) if it dont crank.

on A/T cars cranking is a first thing. so does it.?

Solenoids do not spin, the stroke only , it a linear motion.

the Sol. moves the pinion and the main contactor switch only.

my guess is the Starter spins and the crank don\'t spin,

you hear the starter motor spin up, it sings. like bird.

that means the starter /solenoid are bad. (crude)

if the battery is good and or jumper starting off a running car.

It can just be a dirty starter pinion, clean it , repeat.

fixed many for this. i have.

battery cable lugs clean, and good. no green rust.

bad cable usually just make a loud THUNK sound. no spin.

Sep 02, 2014 | 2005 Jeep Wrangler X

1 Answer

I put a alternator on now it wont crank, jus spin over

Ok , what type of toyota and type of engine, year too would help.
When you say it spins over is the starter motor making noise but the motor does not turn? Cranking and spin over are the same terms of words. Cheers

Jan 07, 2014 | Toyota Cars & Trucks

1 Answer

1997 Mazda MPV 3.0L 2WD Auto: The starter engages the motor spins valve train moves but wont run starter sounds different, spins faster

have a compression check done on the engine If the motor spins faster then that indicates a compression problem form no resistance in the motor.

Sep 22, 2013 | 1997 Mazda MPV

1 Answer

My mercedes 1997 c230 wont crank it has gud battery but it wont crank at all

There could be a couple of things going on here. First you could have a bad ground (or connection in general), which would result in no power being provided to the starter motor. The second possibility is that you have a faulty ignition switch. The third possibility is that you have a bad starter motor or starter motor solenoid.

I would start by having an assistant stick their head in the engine compartment while you try to start it. If you hear a click coming from the starter motor, which is at the rear of the engine, then it is getting power to engage the solenoid but the motor is not spinning. In this case you have a bad starter motor. If you hear nothing, you may have an electrical problem where no power is getting to the starter motor, or you have a bad solenoid.

To check to see if power is getting to the starter you need to check the continuity of the lines using a multimeter. You should be able to find the problem spot by doing this. Good luck

May 21, 2010 | 1997 Mercedes-Benz C-Class

1 Answer

2004 F-250, 5.4l gas. Won't start or even crank.

are you referring to the starter relay on the firewall? the voltage should drop to 0 when measuring across the signal path because the connection is made, essentially making it a piece of wire and there is no difference in potential between the two points. is there 12v to the starter motor? is the starter solenoid (located on the starter) receiving 12v? check fuses and fusible links. disconnect hot leads from the starter. remove the starter, and supply 12v directly to the motor. does the pinon gear extend and spin? starter.

Apr 17, 2010 | 2004 Ford F250

2 Answers

Wont crank


Sep 14, 2008 | 1998 Isuzu Rodeo

Not finding what you are looking for?
2000 Oldsmobile Intrigue Logo

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides