Question about 2000 Dodge Durango

2 Answers

P0753 car want go into ovr drive and has high rpm

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 5,763 Answers

This code means theres a problem with the shift soleniod for the 3-4 shift, have this soleniod tested,its locted on the valvebody if the pan was dropped you will see the soleniod.

Posted on Oct 04, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 110 Answers

Overdrive solenoid control circuit problem - Might be a plugged Solenoid(can be cleaned without pulling transmission), or your Overdrive Clutches are worn out(only if the engine revs up when it tries to go into Overdrive). When was the last time you had the transmission serviced?

Good Luck

Posted on Oct 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P0753, p0758 and p91860 what's my problem and how do I fix it?


Your best bet would be to take your vehicle to a ASE certified professional . You do not have the tools to diagnose this or the information.
DTC P0753
The 1-2 shift solenoid (1-2 SS) valve controls transmission fluid pressure acting on the 1-2 shift valves to position the valves for the appropriate gear. The 1-2 SS valve is a normally-open exhaust valve located on the control valve body. A fused circuit supplies ignition voltage to the 1-2 SS valve. The PCM commands the solenoid ON or OFF by switching the ground path. When the 1-2 SS valve is commanded ON, the PCM senses low voltage. When the 1-2 SS valve is commanded OFF, the PCM senses high voltage. Refer to Shift Solenoid Valve State and Gear Ratio .
If the PCM detects a continuous open, short to ground or short to power in the 1-2 SS valve circuit, then DTC P0753 sets. DTC P0753 is a type B DTC.
DTC P0753 sets when one of the following conditions occurs for 5 seconds:
Condition 1 The PCM commands the solenoid ON and voltage feedback remains high, B+.
Condition 2 The PCM commands the solenoid OFF, and the voltage feedback remains low, 0 volts.
DTC P0758
The 2-3 shift solenoid (2-3 SS) valve controls transmission fluid pressure acting on the 1-2 and 2-3 shift valves to position the valves for the appropriate gear. The 2-3 SS valve is a normally-open exhaust valve located on the control valve body. A fused circuit supplies ignition voltage to the 2-3 SS valve. The PCM commands the solenoid ON or OFF by switching the ground path. When the 2-3 SS valve is commanded ON, the PCM senses low voltage. When the 2-3 SS valve is commanded OFF, the PCM senses high voltage. Refer to Shift Solenoid Valve State and Gear Ratio .
If the PCM detects a continuous open, short to ground or short to power in the 2-3 SS valve circuit, then DTC P0758 sets. DTC P0758 is a type A DTC.
Conditions for Setting the DTC
DTC P0758 sets when one of the following conditions occurs for 5 seconds:
Condition 1 The PCM commands the solenoid ON and the voltage feedback remains high, B+.
Condition 2 The PCM commands the solenoid OFF and the voltage feedback remains low, 0 volts.
What's this p91860 , no such code .

Apr 02, 2016 | 2003 Pontiac Aztek

1 Answer

Have a 2002 sonoma automatic transmission replaced shifts fine but from 2nd to 3rd it shifts but the rpm does not come down until you let the throttle off and 4th the rpm does not come down at all


Go back. The ajustment is off. Its the tv cable or othr. On 4 its not goin in to ovr dr. Which confirms it. The mech shuda testdrivn. Make sure fluid is rite level. Some cars dont gear rite if below operating temp

Jun 02, 2015 | Cars & Trucks

2 Answers

Im experiencing high rpm while driving. At 50mph im at 3000 rpm and my fuel economy is tanking. what's the problem?


The transmission torque converter is not in
lock-up, as the rpm is too high

Should be about 2,800 tops at 65mph

Mar 04, 2013 | 2002 Jeep Grand Cherokee

1 Answer

Driving on the road the RPM goes higher wituout speedind


Check out related help links to troubleshoot these problem:----Click the link below:---Idles Fine but RPM jumps in drive mode?http://technoanswers.blogspot.in/2012/07/idles-fine-but-rpm-jumps-in-drive-mode.html
---------Mitsubishi Lancer rpm needle bounces?http://technoanswers.blogspot.in/2012/02/mitsubishi-lancer-rpm-needle-bounces.html
--------How to adjust rpm on 2009 dodge charger SRT8?


http://schematicsdiagram.blogspot.com/2011/12/how-to-adjust-rpm-on-2009-dodge-charger.html
---------
Engine cuts out at 3000 RPM?http://schematicsdiagram.blogspot.com/2011/12/engine-cuts-out-at-3000-rpm.html

---------

Cold start problem and vehicle shudder around 2500 to 3500 rpms
http://repairhelpcenter.blogspot.com/2012/10/cold-start-problem-and-vehicle-shudder.html

---------
High rpm in neutral? Inconsistant high RPM in neutral?http://technoanswers.blogspot.in/2012/02/high-rpm-in-neutral-inconsistant-high.html

-----------
Jetski Sputters and Low RPM? http://whatisbyme.blogspot.in/2012/07/jetski-sputters-and-low-rpm.html

--------
Fuel Injection Problem And RPM suddenly increaseshttp://whatisbyme.blogspot.in/2012/07/fuel-injection-problem-and-rpm-suddenly.html

----------
2005 Toyota Highlander: Engine runs hard RPM below 3000?http://whatisbyme.blogspot.in/2012/05/2005-toyota-highlander-engine-runs-hard.html

---------
1987 Toyota Camry: RPM Drops going Up hills?http://whatisbyme.blogspot.in/2012/05/1987-toyota-camry-rpm-drops-going-up.html

-----------
Cruise Control stops working, Excessive cranks to start the engine and RPM goes max 2500 http://whoisbyme.blogspot.in/2012/07/cruise-control-stops-workingexcessive.html

----------
1990 Toyota 4Runner: Engine cuts off when reaches 2000 RPM?


http://whatisbyme.blogspot.in/2012/05/1990-toyota-4runner-engine-cuts-off.html

------------
1999 Toyota Camry: Erratic stalling and high engine RPM at idle?


http://whatisbyme.blogspot.in/2012/05/1999-toyota-camry-erratic-stalling-and.html

---------
1995 Toyota LS: Misfire at idle or low RPMhttp://whatisbyme.blogspot.in/2012/04/1995-toyota-ls-misfire-at-idle-or-low.html

-----------
Lexus RX: Tapping noise under Valve Cover At Low RPM?http://technoanswers.blogspot.in/2012/04/lexus-rx-tapping-noise-under-valve.html

----------
These will help.
Thanks.

Nov 22, 2012 | 2008 Toyota Avalon

1 Answer

P0753


The code is for a shift solenoid which should be inside the transaxle.
You may have to take it to a shop for repairs.

Jul 18, 2012 | 2004 Kia Spectra

3 Answers

The engine 4M41 is overheating heating on hills


if you drive on hills at high rpm ur engine temp. will surely shoot up due to the load on ur engine while trying to gain the desired speed/ u should not drive uphill with high rpm try to maintain low speed with low rpm

Apr 08, 2010 | 2000 Mitsubishi Montero Sport

1 Answer

Fault codes 2001 dodge 2500 truck p1594 p0753 what do they mean?


p1594 means the charging system voltage is too high. p0753 means the electrical solenoid 'A' has a problem. probably went bad and caused the other code p1594 to happen. replace solenoid.

Nov 27, 2009 | 2001 Dodge Ram 2500 Truck

2 Answers

A question about a 94 Lexus Es 300


I have a 94 lexus es 300 and I have the same problem the check engine and o/d light is on and it drives slow in first or second and then it will shift into 3rd with no problem i went to a tranny shop and they replaced the p0753 Shift Solenoid A Electrical and the p0773 Shift Solenoid E Electrical and drove around the block and after 15 mins the lights came back on and car acted the same way and got the same codes so he didnt charge me anything and was like he didnt know what it was so now im stuck with a car that doesnt have 1st or 2nd gear so if anyone can help im open for anything

Mar 13, 2009 | 1996 Lexus ES 300

Not finding what you are looking for?
2000 Dodge Durango Logo

513 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...