Question about 1984 Toyota Tercel

1 Answer

Engine {3a} suddenly stopped running -no spark

Engine[3a] suddenly stopped running-no spark at any plugs.dist contacts,cap and leads appear ok.next step for troubleshooting?

Posted by on

  • zener256 Jul 28, 2008

    when I down the velocity the car does not work I have to use second for run the car

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 31 Answers

See your basic elements for your car to have a spark is your coil ignition module condenser in some of the cases your computer is not sending a spark signal. so check your ECM wiring

Posted on Jun 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

55 ford thunderbird points are firing, but no fire to plugs.


if you have a "barn find"and it has the original leads the spark will probably jump off the leads,other than that look at the top of the coil for flash over or the dist cap for cracks,sometimes the rotor also cracks under the brass strip which you cannot see and the spark jumps to the dist shaft,take lead off coil and position it 1/4 inch from the engine and crank,if you see spark jump the gap,thenreconnect it and do the same with the spark plug leads from the dist to see if the spark comes back out of the dist,if no spark from coil it may be internally shorted

Mar 15, 2015 | Ford Cars & Trucks

1 Answer

No spark from the distributor in my sr18 engine


have you checked the low tension wire from dist to coil ? inside dist cap is a rotor arm so check that has a good condition contact in center and end also check the interior dist cap contacts for signs of corrosion etc , dont think this version has points , check the HT leads for fit , condition etc keep me posted if you wish

May 14, 2014 | Cars & Trucks

1 Answer

Where do wires go from coil pack to distributor cap and where else 1990 chevytruck 350


coil HT lead to centre contact on dist cap ,the remaining HT leads go to the spark plugs you will need the firing order to get them on the correct plug follow this link may have to research site for your year vehicle
1967 1972 Chevrolet Spark Plug Wiring Diagrams

Apr 04, 2014 | Cars & Trucks

1 Answer

Engine won't start. Getting no spark.


Have you check to see if the timing on the car is right?

Nov 08, 2013 | Cars & Trucks

1 Answer

My ae92 1991 corolla backfires coming down gears how do you make it stop?


Have you checked the spark plugs, if its ok then you change the dist-roto and the dist-cap all will be ok but make sure you fit the NGK spark plugs BCPR 6EY spark plugs.

Aug 11, 2010 | 1991 Toyota Corolla

3 Answers

Just replaced plugs engine missing and back fireing.


sound like you may have crossed a wire?

Nov 06, 2009 | 1999 Dodge Ram

1 Answer

There is no power going to the dist cap. I put a new coil in but this did not fix it. The spark plugs will not fire. Everything works but the plugs will not fire. The engine just turns. Ichecked the wires...


U have a power wire that has been breached ur gonna have to check continuity to ur power wire at the coil and dist hook one lead to the fuse that supplies power and other lead to to same circuit under hood at coil repeat step with all wires on coil and dist just to be sure.

Apr 03, 2009 | 1992 Plymouth Voyager

1 Answer

Cranks but will not start.


Ignition coil or distributor cap. Not knowing the Avenger I couldn't tell you where to find either but follow the HT leads from your plugs and you should find them. If you aren't getting a spark on any plug then the perp is your ignition coil and it'll need replacing, if you're getting a spark on some then it's the dist cap, check the contacts and give them a clean and see what happens. F.Y.I. the dist cap is the first thing back up the line from your plugs with all the HT leads going in, and the ignition coil is after the dist cap.

Nov 09, 2008 | 1995 Dodge Avenger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

358 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...