Question about 1996 Chevrolet Blazer

1 Answer

I have a 96' chevy blazer that I replaced a fuel pump and fuel filter..checked all fuses and relays..still will not start..need help please..I tried using starter fluid it ran until it used up the fluid..help please

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Assuming you have everything reinstalled correctly and the fuel pump was your problem to start with, try disconnecting the battery for at least 15 minutes to reset the computer. This worked on my 1996 Blazer.

Posted on Oct 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 gmc 1500 350 5.7 new fuel pump and filter it cranks over but wont start


Kelly, could be a few issues, security lock out, crank sensor, fuel pump fuse/relay, faulty new pump,faulty ignition switch, etc. Attached links may help you diagnose the crank no start issue you are having.
Check the attached links,video,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
96 98 Chevy pickup cranks but won start first steps
GM no start no fuel troubleshooting
No Start No Spark Cranks OK GMC Jimmy S10 Blazer


Apr 24, 2016 | GMC Cars & Trucks

1 Answer

I have a 96 Chevy Blazer 4 door I've change the ignition switch starter all that good old stuff if I turn the key and jumper by the starter it will run I have liked it just no crank no start


1989 Chevy blazer 4.3 won't start..I have ... - CarGurus

www.cargurus.com > Questions > Chevrolet > BlazerCarGurusJan 30, 2013 - 96 Chevy S10 Blazer with 4.3 L engine vortex will turn over but won'tstart. ... i a 93 k5 blazer 5.7tbi in cold weather it will not start, if i hook jumper ... was told it just needed a Fuel pump, I replaced the Fuel pump, and the Filter, ...

Oct 12, 2015 | Cars & Trucks

3 Answers

1997 chevy blazer what could it be


I had a 1997 s10 4*4 with the 2.8 v6.
mine do that I had to pull the gas tank replace fuel filter plus had to take undo the line from the intake and blow air thru it. Make sure all u're filter are replaced and y u have the tank down replace the fuel pump. I hope this helps u

Jun 23, 2014 | 1997 Chevrolet Blazer

1 Answer

I have a 97 Chevy Blazer that will crank but not start. I can get the vehicle started with the help of starting fluid or gasoline put in the throttle body but throttle response while driving is poor. ...


if it starts with starting fluid. its not getting any fuel to engine. first check the fuse and relay for fuel pump. then make sure fuel pump comes on when you try to start it. its only on for a few seconds when starting. then when driving its on all the time. good-day ! fuel filter also if need be.

Jul 09, 2011 | 1997 Chevrolet Blazer

1 Answer

1996 Chevy Blazer won't start unless i add gas to the carb. Turns over fine but won't start.


You could try changeing the fuel filter its located under the drivers door mounted to the frame in the fuel line . But the most likely thing that it could be is the fuel pump. You could check fuse # 9 its a 20 AMP in the fuse box that feeds the relay located in the glove box but on this vehicle even if the relay wore bad the vehicle would still start it would just crank for a longer time . the fuel pump has a beck up power supply also feed from fuse #9 that runs through the oil pressure sending unit. So if its not the fuse its the pump or a bad connection at the pump and that is located inside the fuel tank witch needs to be droped to replace the fuel pumpGood luck with it but this is a common issue with blazers

Mar 06, 2011 | 1996 Chevrolet Blazer

1 Answer

I have a 96 Chevy S-10 truck I have replaced all of the relay fuses, the ingintion control module plugs wires fuel pump and filter and it still will not start


You need to decide if it is a fuel problem or an electrical problem. Open the air cleaner container and squirt a small amout of ether on to the air cleaner cartridge. If the S-10 starts you have a fuel problem. It will kill again when the ether runs out.

Aug 31, 2010 | 1996 Chevrolet Blazer

1 Answer

1997 chevy s10 blazerdash wont light up when key


the dash sound's like a fuse, check the fuse box under the hood and in the door jamb on the side of the dash, also check your fuel filter and fuel pump, im betting on the pump because i have a 2001 chevy blazer that has had two replaced and it has 233000km on it!

Jun 04, 2010 | 1997 Chevrolet Blazer

1 Answer

Fuel problems cant get car to start


FUSE SHOULD BE UNDER THE DASHBOARD ON THE DRIVERS' SIDE. WHEN YOU CHANGED THE PUMP, YOU NEED TO CHANGE THE FUEL FILTER AS WELL TO MAINTAIN THE WARANTY. I WOULD CHANGE THE FUSE AND FILTER. HOPE THIS HELPS. LET ME KNOW HOW YOUR DOING. BEST OF LUCK

May 01, 2009 | 1986 Chevrolet S-10 Blazer

1 Answer

HELP! HELP! SOMEONE PLEASE ! 2001 chevy blazer fuel problems


I would check to be on the safe side the fuel filter is going in the right direction. The arrow is pointing towards the engine away from the fuel tank, Then you need to make sure the fuel pump wiring connections are good contact and did not come loose when driving.

Mar 18, 2009 | 2001 Chevrolet Blazer

1 Answer

1991 chevy s10 blazer


Check the fuse under the dash. Did you replace the inline fuel filter? If not, you could loosen the line going into the filter then turn the key to the on position. The pump should run for about 2 seconds then the relay should kick off. Turn off the key for approx. 5 seconds then cycle key back on and the pump should cycle again. If you get a 2 second burst of fuel each time then the pump is cycling. Install a new fuel filter and check the grounded wire by the tank. Hope this helps. :)

Nov 03, 2008 | 1993 Chevrolet S-10 Blazer

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

645 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...