Question about Peugeot 405

1 Answer

Recently bought peugeot 306 hatchback, S reg. it passed M.O.T 13th Sept but yesterday broke down on Motorway, loss of acceleration and felt like pulsating/shuddering, the handbrake clicks 9 times before its on. and now i've been told there should only be 3 clicks. please help if u have any ideas what this could be caused by and a price? thank p.s can't select 306 so have put 405. sorry!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Peugeot Master
  • 22,095 Answers

You have bought as pig in a poke ,yes 3 clicks is right on handbrake ,but its easy to do just remove the rear drums and adjust brakes manually,half hours work thats all ,but it would still pass mot because its on the rolling road brake tester and both rear brakes were within 25%,But as for it breaking down i cannot say without my dirty oil encrusted fingers playing with its vitals .but if your passing alicante spain i will have a look for you

Posted on Oct 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

[peugeot 306 ,juddering when on motorway other rhan that fine


Brake rotors may be warped and need to be machined, or it needs a wheel alignment

Oct 09, 2012 | 2000 Peugeot 306

1 Answer

My roof wont operate on my r reg 306 convertable


May be split wires in drivers door a pillar. Is a common fault on 306's poor design. I could not lock my doors because of the split wires. Maybe worth a look.

Jan 09, 2012 | 1997 Peugeot 306

1 Answer

Looking for a fuse diagram for peugeot 306 xldt


We have the 306 Hatchback Owners Manual (spanish) and contain some diagrams like this...

zjlimited_1946.jpg

Contact us to check it.

Sep 27, 2011 | Cars & Trucks

1 Answer

Struggling uphill on motorway - foot to floor - new clutch


cluctch is not properly adjusted or they didn't replace the pressure plate?

Oct 19, 2009 | 1997 Ford F150 Regular Cab

1 Answer

Timing belt 1997 306 1.9 td


hallo
hope it helps
marko
94b52e0.jpg

Oct 08, 2009 | 1991 Peugeot 405

1 Answer

I have a peugeot 306 1.4 v reg. when at idle ,the revs are about 1100. when i accelerate the revs at first drop and for a **** second and you think the engine is going to stall but all of a sudden the revs...


check ur air flow take the air filter top off and take the air filter out then try it a few time if ok put new air filter in if not check the carb

Sep 24, 2009 | 1991 Peugeot 405

1 Answer

S reg peugeot 306 1.9 gearbox??


It may be the clutch thrust bearing drying up.
Causing it to start seizeing.
The easiest solution is to change the whole clutch, or get it changed in a garage as you do need some specialist tools and knowledge.
Check the fan belt as the can make the same screech when worn or loose.

Aug 26, 2009 | 2006 Peugeot 604

3 Answers

Speedo, rev counter and fuel gauge not working on peugeot 306


hi i have a garage this problem i encountered myself the other week disconnect the battery for about five minits and then reconnect this solved the problem on this P reg 306 good look if you have not sorted your problem.

Mar 23, 2009 | Peugeot 405 Cars & Trucks

3 Answers

Peugeot expert van


A clogged, overheated catalyst can do this, it sends a signal to the computer and lowers performance plus increases the gas usage.

Jul 05, 2008 | Peugeot 604 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...