Question about 2001 Ford Taurus

1 Answer

Where is the PCV valve located on my 2001 Ford Taurus 3.0L OHV?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

It's kind of hidden- left side of vehicle, on left side of rear valve cover.

Posted on Oct 05, 2010

Testimonial: "Thank you! I will try and find it this evening to replace the PCV"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is pcv in 200 ford taurus


On Overhead Valve engines, called OHV engines, it's in the rear of the valve cover. On OHC engines, overhead CAM engines, it's on an oil separator in the lower intake manifold. don-ohio

Jan 08, 2017 | Ford Taurus Cars & Trucks

1 Answer

Pcv location ford escape 2010 2.5 gas engine


The PCV valve is located under the intake manifold on the non-hybrid 2.5L engine. The intake manifold MUST be removed in order to service the PCV valve.
The PCV valve sits in the crankcase vent oil separator.

May 16, 2014 | 2004 Ford Taurus

1 Answer

Location of pcv valve on 2008 ford taurus 3.5


On 3.5L engines, the PCV Valve is located on the rear valve cover (see pictures bellow). Please note: the PCV valve must be replaced if it's removed. Access to the valve is easier if you remove the upper intake manifold. However, this is not absolutely necessary and if you are already a little mechanically inclined you can do it the way you would replaced any other PCV valve.

    -A 19mm open wrench will make your life a lot easier if the PCV valve is a bit tight. It is in an awkward spot to apply pressure.

    -Disconnect the electrical connector from the valve. There is a small pin or locking device on the wire that you will have to slightly depress for the connector to release.

    -Disconnect the hose from the valve and turn the hose clockwise so that you have a bit of room to work with.

    -Turn the PCV valve counterclockwise and remove from the valve cover. Pay close attention to the position of the valve at the point when it is to be removed. The new PCV valve will go in at that same position. Why is this important? It is possible to install the PCV valve facing in the opposite direction. Once the PCV valve in and locked it in place, it damages the locking mechanism. Therefore, if you remove it you will have to throw it away and purchase a new one.

    -You just saved $130 - $150 to have the PCV replaced at the dealership...

location-pcv-valve-2008-ford-taurus-3-5-cgnwdhiy0mxwbb3xg5zhzgxj-5-0.jpg

Apr 07, 2013 | 2008 Ford Taurus SEL

1 Answer

Where does the pcv valve go


there are two engine option for your vehicle

if it is the 3.0 OHV the pcv valve will be in the rear valve cover on the passenger side.

if it is the 3.0 DOHC the pcv valve will be under the throttle body on the drivers side.

Feb 27, 2012 | 2003 Ford Taurus

1 Answer

Need to locate pcv valve on 2001 ford ranger 3.0. please help


PCV valve is on one of the valve covers...
It has a 1/2 to 5/8 inch rubber or plastic hose attached to it.
Usually on the top of the valve cover, and close to one end or the other.

Aug 01, 2011 | 2004 Ford Taurus

2 Answers

Thanks so much for info.could you tell me where tempature sensor is located on 2001 ford taurus


zjlimited_1027.jpg

Fig. The temperature gauge sending unit is located on the bypass tube next to the ECT sensor just above the bellhousing-3.0L OHV (2 valve) engine (click over pic for zoom).

Hope this help.

Apr 14, 2011 | Ford Taurus X Cars & Trucks

1 Answer

2004 ford taurus


You're pcv valve (positive crankcase ventilation valve) is located in the end of the cam cover it will have a hose connecting it to the intake manifold.

Sep 14, 2008 | 2004 Ford Taurus

Not finding what you are looking for?
2001 Ford Taurus Logo

Related Topics:

491 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...