Question about 1989 Plymouth Reliant

Open Question

I need a picture of the timing point for a 89 plymouth reliant

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

popsgifts
  • 160 Answers

SOURCE: 89 reliant plymouth car stall out

You're right; It sounds like fuel delivery, but start with the simplest suspects first.
Change the fuel filter(s) first, and if this doesn't get it, go for the fuel pump.

Posted on Apr 18, 2010

wireguy212
  • 1627 Answers

SOURCE: i need to know the gap for spark plugs on an 89

The 2.2 and 2.5 like to run best set at 55 thousandths of an inch.

Posted on Jul 14, 2010

  • 878 Answers

SOURCE: i put gas in my

change your gas filters and add gasoline treatment

Posted on Sep 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi,My 89' Reliant stalls when slowing down to a stop sign or parking lot.Could the cause be the fuelpump or distributer pickup?


Possibly a fuel issue, but have the pressure checked before condemning the pump. Is the gas filter good? And the air filter?

It could be an idling issue-idle too low. Check if can be raised, or if idle control motor or valve needs service. Idle should be around 750 rpm, in drive gear, maybe a bit lower, not below 650 rpm, though.

Aug 28, 2013 | 1988 Plymouth Reliant

1 Answer

My 89 reliant starts but runs rough and shuts off. replaced plugs and wire, cap and rotor. O2 sensor, and basic maintenance. ran better for a little while(about a month) Now cutting off again. any ideas


You may need to replace the ignition module it sounds like a weak ignition component. Before doing this try retrieving the engine trouble codes you should be able to purchase a code reader at an advance auto parts store for about $30.00.

Jun 23, 2010 | 1988 Plymouth Reliant

1 Answer

Correct timing for a 1983 plymouth reliant


7 degrees before top dead center if you got the mitsubishi 2.6 and either 10 or 12 btdc on the 2.2 double check you vehicle manual to be exact

May 05, 2010 | 1983 Plymouth Reliant

1 Answer

89 reliant plymouth car stall out


You're right; It sounds like fuel delivery, but start with the simplest suspects first.
Change the fuel filter(s) first, and if this doesn't get it, go for the fuel pump.

Apr 18, 2010 | 1989 Plymouth Reliant

1 Answer

Changing the Fuel Filter on a 1988 Plymouth Reliant


MAKE SURE KEY IS OFF USE A BUCKET AND TAKE OFF LINES TO THE FILTER YOU WILL LEAK SOME THEN REVERCE THE SAME WAY BACK BUT MAKE SURE THE ARROW IS POINTED TOWARD THE ENGINE ON THE FILTER

Jul 27, 2009 | 1986 Plymouth Reliant 4 Door

2 Answers

1989 Reliant K running poorly


my reliant (89) idles very high when you start it, then settles
down, but while driving it starts to chug very bad. I have new plugs, wires, distribitor cap and rotary button. How do I fix it??

Aug 19, 2008 | 1989 Plymouth Reliant

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...