Question about 1997 Pontiac Bonneville

1 Answer

I have a leek in my fuel line do i need to replace the whole line? Its where it meets the injectore

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 343 Answers

Get an OEM part or better, the line can pressurize to over 65 lbs best to have a licensed shop do this has there may be special tools to undo ridgid line

Posted on Oct 04, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hi, Where does the fuel line meet the engine on a 2001 1.3 ford KA? I can't find it Thanks

If you can find the fuel rail where you will also find the injector. the fuel line will be hooked up to that line and go all the way to the tank, good luck.

Jan 26, 2015 | Ford Cars & Trucks

1 Answer

How to replace fuel pressure regulator on a 98 pontiac grand prix 3.8

After taking of the huge plastic cover on top of the engine you will see where the fuel injectors are. On the fuel rail which supplies fuel to injectors theres a vacuum line that goes into the fuel regulator. It's black and round and at the beginning of the fuel rail. One side has the fuel line screwed into it and the other side is directly connected to the fuel rail. The whole part comes out. The piece with the vacuum line in it. There's a bolt that holds it in. Very easy to change. Let me know how you come out

Jan 29, 2013 | 1997 Pontiac Grand Prix

1 Answer

Why does my 1993 GMC suburban stall when u release the gas

the o rings on the fuel injectors are leaking and when you let off of the pedal it creates a rich condition untill it can adjust fuel trim . remove the intake upper and the fuel system is exposed replace the whole thing or get o -rings and fuel lines but the injectors were none to clog so you should replace the whole unit auto zone and advance allways has in stock its that common

Jul 29, 2012 | 1993 GMC Suburban

1 Answer

Can anybody tell me how to change fuel injectors on 1989 audi 200 quattro?

first relief fuel pressure before disconnecting fuel lines remove fuel pump fuse or relay start engine let it idle until stall out lack fuel fuel now fuel pressure is reliefed. you have to remove top upper air cleaner housing, you have to remove whole entire air cleaning system because the fuel lines with fuel injectors is under the air cleaner filament you have to remove entire fuel line with fuel injector in order to replace fuel injector.

Nov 21, 2011 | Audi Cars & Trucks

1 Answer

Fuel system not getting gas correctly

Make sure that there is signal at individual injector. The injector needs to have a signal so it can open the valve to shoot fuel in each cylinder. You can buy the NOID to hook up at each injector. When cranking the engine, these NOIDs will light up sequentially then you have signal. Next thing is to check if you have enough fuel pressure in the line. If it is not then check the fuel rate( the amount of gas delivered by the fuel pump by minute). It the fuel pump rate is meeting the spec then change the fuel pump regulator, If the fuel pump rate is not meeting the spec then change the fuel filter. Repeat the check to see if there is an improvement in the fuel pressure. If it doesn't improve then change the fuel pump. This is the logic of troubleshooting. However, considering the time and labor hours when doing DIY, I just replace everything since the parts are not costing more than the time spending in taking the parts in and out. Good luck.

Nov 17, 2010 | 1991 Buick Park Avenue

1 Answer

1998 Buick Park Ave fuel supply line to injectors leaking at plastic coupling - Do I need to replace whole line from gas tank to injectors?

Thank goodness you will not have to. Your local parts stores sell a repair line and couplers for the high pressure fuel line. Which is relatively cheap comparing it to replacing the whole fuel line. Repair is straight forward and instructions come with it in case you run into issues.

Aug 05, 2010 | 1998 Buick Park Avenue

3 Answers

Why does my car smell like gas & uses way too much gas and is leaking gas on my engine out of a line?

I don't know if your stating that gas is leaking on your engine but anyways....other than the bad syntax in your sentence. You may have leaky injectors and there maybe too much fuel getting into your combustion chamber and getting stuck around the catalytic converter which will give you really bad gas mileage, smell like fuel and destroy you Cat.Converter. Start with injectors to see if they are leaking and check all fuel lines thoroughly. Also check your charcoal canister (black canister on the firewall) to see if its broken, cracked or leaking anything. If its very strong. Check near the tank itself. If you ever see fuel on the ground when you fill your tank, you may have a torn line at the tank or the seal around the gas tanks fuel sending unit is leaking is leaking. Good luck Plz rate

Jan 16, 2010 | 1997 Pontiac Sunfire

2 Answers


unplug thr coolant sensor ifitsone with the plastic top try to move it with your fingers if it turns slightly ittl be bad,
even thou to besure do a voltage check,a feuel presure test can't huurt,last but not least an injector balance test

Dec 12, 2009 | 1993 Chevrolet S-10 Blazer

1 Answer

1995 cavalier fuel injectors leek , i replaced o rings and still leek any service bulletins

You need to change the injector so I had to do the same, because the leek was over the injector housing.

Nov 01, 2009 | 1995 Chevrolet Cavalier

2 Answers

How to manually get a trouble code out of a 95 blazer with vortec

The vortec motor has been known for the so caller spider assembly which is the fuel injection set up inside the intake manifold going bad.The regulator starts leaking wich puts extra fuel into the motor.If that is it you should change the whole assembly.

Nov 30, 2008 | 1995 Chevrolet Blazer

Not finding what you are looking for?
1997 Pontiac Bonneville Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides