Question about 2002 Mercedes-Benz SLK-Class

Open Question

Number plate lights not working have changed bulbs but still no fix

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Plate light does not work, but lights are good and sockets seem good

check bulb the number plate light runs on the same circuit as the side lights so if they are working its got to be a bad earth on the plate light

Jan 24, 2016 | Cars & Trucks

1 Answer

Which fuse is for the licenses plate light. I've changed the bulb but it still doesn't work

licence plate bulb is on the same circuit as the tail lights
if you have tail lights but no number plate light ,then problem is in the bulb holder or wiring

Nov 11, 2015 | 2001 GMC Yukon Denali

1 Answer

Number plate lights not working

have you the correct wattage bulb (s) fitted?
how do you know the bulb failure light is refering to number plate lights?

Jun 29, 2014 | 2005 Rover 75 1.8

1 Answer

Ford focus manuel 2001- Just my side brakelights have stopped working. My license plate light hasn't worked sence I got it. The middle dashboard lights have stopped working. And the speedometer drops on...

simply bad earths my friend... find out earth locations on the car and clean and re tighten. number plate bulbs are terrible for going on these as water ingress so get changing bulbs etc. I would start by removing boot panels and earths are in this location near lights and also kick in when your sitting in driver seat and tip your foot off there....bottom line fix just locations to find for it. hope diagram helps you.35e5bf68-7edc-4c46-8d53-7aef77beedfb.jpg

May 01, 2014 | Cars & Trucks

2 Answers

How do i replace rear number plate light bulbs?

You get to them by removing the few center fabric plugs in the trunk, and then pulling the light assembly out of thier holes. It's quite obvios once you remove the clips. Hope that helps.

Nov 15, 2009 | 2003 Toyota Celica

1 Answer

How to cahnge number plate lights?

1). Open your Trunk and let it extend all the way up
2). Look up at the part of your trunk closest to the license plate.
3). There should be 2 wires, one going to the left light and one going to the right light. Follow the wire to the bulb, and twist counter-clockwise, or to the left to remove the bulb from the housing.
4). Replace the light bulb with the recommended factory bulb.
5). Repeat step 3 in the reverse order.

Apr 04, 2009 | 1997 Hyundai Accent

2 Answers

Need to fix lights on number plate on 1.3 3dr gl

hi from uk the number plate lights x2 are on same fuse as side+tail lights so if n/plate is not lit ?more likely bulbs have blown ? to access remove the panel from boot lid (clips+screws) then you will see rear of n/plate lights the bulb holders twist anti clock slightly and pull out replace bulbs with same type 5watt check all work b4 refitting panel

Feb 05, 2009 | 1999 Hyundai Accent

2 Answers

License plate bulb

how to replace the Dodge durango 2004 number plate light

Jan 20, 2009 | 1999 Dodge Durango

2 Answers


take the bulb back out and clean inside the bulb holder, there may be some corrosion or other debris in there

Nov 03, 2008 | 1999 BMW 318 ti

Not finding what you are looking for?
2002 Mercedes-Benz SLK-Class Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

76649 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides