Question about Chevrolet Prizm

1 Answer

When i started my the blue high beam light flickered for awhile and then turned off , then the head light automatically would not come on only manually.Now the tail lights will not shut off! I disconnected the battery and reconnected the problem still exists. Is there a combination of switches and ignition that will reset the auto light system or is it the switch.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 5,763 Answers

Not knowing the year make or model car i can only guess here, but it sounds like the switch may be bad, try unconnecting the connector from the switch and see if the tail lights shut off, the flickering high beam indicator may be due from a faulty switch or high beam relay but if all works manualy i dont think its the relay.

Posted on Oct 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Indicators, headlight, high beam, Heater showing strange behavior. Can you please suggest what could be the possible reason for it . BCM or Multi Function switch?


Hooking up an OBD2 reader will tell you right away if the BCM is shot or BCM. Take it to advanced auto or O'Riley's they will hook up a an OBD2 reader and tell you. Sounds like a faculty PCM and BCM to me or just faulty PCM since you've replaced the Body Control Module already.

Feb 20, 2015 | 2008 Hyundai Elantra

1 Answer

Is Blue Lite For High Beam Supposed T oStay on when clicked?


To clarify, when you pull the turn signal lever towards you, the high beam lights will come on only as long as you hold the lever up. This is the flash to pass feature.
To switch the headlights from low beam to high beam, you push down on the lever towards the dash. Then the high beam lights and the blue indicator light should stay on.

Jun 09, 2013 | Cars & Trucks

1 Answer

Head light problems sometimes they will not shut off sometimes they (low beams) come on by themself high beam will not shut off


Are you sure there not running in daytime running light, when you think high beams are on

Also, there is sensor on the dash, usally on the speaker grate, that senses night and day. In the daytime your headlights will automatically come on when your car is in drive, and be on the high beam bulb, but dimmer than regular. At night, or in low light conditions, your lights will automatically switch from daytime lights to regular low beams. And yes, even when your switch on the dashis turned off, your lights work automatically.

To turn of the auto setting, just push the override button for your dome light, in and out 3 times, you should hear a chime, and your lights should shut off. This setting resets everytime you shut your vehicle off. Or to turn the auto setting back on, push the over ride button 3 more times.

Apr 15, 2011 | 2002 Chevrolet TrailBlazer

1 Answer

Why wont the headlights won't go on


It can have a bad headlight switch, but most often it is a bad high beam switch on the floor.

Turn on the headlights and press the high-beam switch off and on a few times, if the headlights flash, flicker, or start working again then replace the high-beam/dimmer switch.

Apr 19, 2010 | 1982 Ford Ltd

2 Answers

How to turn off high beam lights


that should be on your wiper arm just flick the whole handle back and you should hear a click and see the lights on your dash flicker showing high beam and flick again and should be your reg beams

Jan 28, 2010 | 2004 Chevrolet Monte Carlo

1 Answer

My 87 k5 blazer headlights don't turn on when the car is started and running any more... all 4 headlights turn on fine when I pull the lever all the way out for high beams


The vehicle should not have to be running for head lights to burn.If high beams work,then the low beam head lights could be burned out,even though they light up with high beams.The dimmer switch,can be the problem if the head lights only work on high beam.

Dec 12, 2009 | 1987 Chevrolet Blazer

2 Answers

Headlights flickering


This could be caused by a lot of different things,,but usually it is the fault of the Headlight Relay.
Try replacing the relay before going further.

Jan 30, 2009 | 1983 Ford Thunderbird

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...