Question about 1996 Dodge Ram

1 Answer

After replacing front brake and back brake pads and replacing front rotors,there is still and awful squeal when I apply the brakes. What is causing this

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 89 Answers

Did you apply anit-squeal to the back of the pads? If not take apart and do so. I assume your rotors were turned to get the glazing off, or replaced. They are not expensive. This should sove the basic brake squeal.

Posted on Oct 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Brakes make a whistle noise when applied and sometimes a low grown or grinding when coming to a slow stop or start.


A grinding or rumbling noise can also be symptoms of a wheel bearing or constant velocity joint in a driveshaft. A worn wheel bearing can also cause a 'whistling' sound (as can a worn CV joint).

A grinding noise with brakes is either worn pads causing metal to metal contact on the brake disk/rotor, or the brake backing plate catching on a spinning rotor ... or a loose/missing anti squeal brake shim (they stop the pads from rattling and vibrating).

However, as you say a mechanic has looked at the brakes and can't find anything wrong .. I think I would begin to suspect a wheel bearing or constant velocity joint on the driveshaft (front wheel drive cars).

May 05, 2016 | 2007 Honda Accord Sedan

2 Answers

Just had front brakes done but still hearing squealing from brakes do you no why this would be


Squealing from brakes when applied (and sometimes even when not) is a common issue with many vehicles. There are a number of reasons for it, most often it is the brake shoes/pads themselves. Most manufacturers today install ceramic brake pads as OEM parts, but due to their cost, most drivers opt for semi-metallic pads when replacing them. Most manufacturers recommend anti-squeal shims and/or compound be applied to brake pads for disc systems, but they are often ignored and not installed. Older, sticky calipers can also cause poor release of brake pads, resulting in drag and noise. Lastly, worn, warped, and thin rotors can add to noise issues. Having well serviced, quality brake parts and using proper installation techniques will usually remedy brake noise issues. Just as a side note, residual dirt and grease from the installation itself can cause noisy brakes for a few days/weeks after first install until it is worn off and the pads break in. If you have issue beyond the first two weeks, and you have had them installed professionally, take it back and have them verify that the pads were installed properly.

Dec 10, 2015 | 2010 Dodge Journey

1 Answer

Why squeaky brakes on jeep


front or rear.??? my guess front.... wild guess.
if car has pads with the noise makers this is normal and the early warning.
if pads are thick (why not look first???) and squeal.?
  1. this is normal all disc brakes squeal, can and will if they want to.
  2. or has missing anti-squeal shims on pad due bad mech. serv.
  3. or not using anti-squeal glue on back side of new pads.
  4. if in a perfect world they can in fact squeal.
if you have new rotors and pads and all above is good. they may not squeal. the rotors can be tad bump and the pads will resonate to this rotor surface, its harmless this. only annoying.

other factors, why not do a full inspection of the pads and rotors
first and not just guess and wonder.
like:
OMG:
  • Cracked rotors
  • leaking DOT 3/4
  • calipers guide pins seized.
  • Pads shot
  • missing parts, the FSM shows all parts as does jeep parts page.
  • rotors shot , worn illegally thin, warped, or just ugly bad and old.
this is what we call SOP
standard operatiing proceedures.

Aug 18, 2014 | 2005 Jeep Grand Cherokee

2 Answers

2002 dodge durango 2wd. brakes squeal when braking. i have had rotors and pads replaced.


There are 3 to 4 different compositions of brake pads--some are softer--others are ceramic or metallic---probably you have gotten metallic---which do have a history of squealing much of the time. therefore, check to see if that is what you purchased--if so--there is no mechanical problem. However--a tip--especially in colder, salt-using, (on streets)climates. Lubricate the brake rotor sliders with grease twice a year so they don't stick.

Feb 18, 2011 | 2002 Dodge Durango

1 Answer

Should the center spindle nut and 2 torgued phillip head screws be removed to replace front brake rotor on 1999 honda accord lx


will try to help. 1st remove the wheel, then remove the 2 caliper bolts that hold the brake caliper on. after removal of brake caliper, [it should just pull off after the 2 bolts are removed] replace the brake pads[be sure to apply anti squeal lube to the outer side of the pads..not the pad itself,the one not contacting the brake rotor] install the pads, the you will need a C clamp to push the brake caliper pistons back into the caliper. i've used this installation easily. use the old pad ,place it against the caliper piston,then apply the C clamp and push the caliper piston back into the brake caliper, then the brake caliper will slide back over the new pads easily, no need to bleed the brakes if you use this solution. replace the brake caliper bolts, then go to next side and repeat the process. after the replacement of the front brake pads,pump the brakes with engine running!!! it's really a simple process. be sure the brake pads are facing the brake rotors with the [pads] facicing the rotors. no metal facing metal. easy! if you have added brake fluid recently, do not be alarmed if you see fluid coming out of the brake master cylinder,when you use the C clamp to collaspe the brake caliper back into the recessed position. [as always when you have to add brake fluid to the brake master cylinder,it only means your brakes are wearing naturally. if you have a vibration in front wheels or steering wheel when braking, you have a brake rotor or both front brake rotors that need replacement with your brakes also. hope this helps and as always, please get a second opinion if you have doubt. an expert will be happy to help. thank you for choosing fixya.com

Dec 22, 2010 | 1999 Honda Accord

1 Answer

I have a strange, intermittent squealing noise coming from the driver's side front. It sounds like it's coming from the tire, and when I put on the brakes it seems to affect it.


That sounds like the wear indicators are causing the squealing. They are a small piece of metal attatched to the brake pad, that when the pads wear down to a certain point, they began to touch the rotor when the brakes are applied and make a squealing noise to let you know you should check/replace your brake pads.

Nov 06, 2010 | 1993 Ford Probe

1 Answer

What tools needed to replace front brake pads & rotors


Brake Pads
Removal & Installation
Front





3.4L front disc brake assembly
toy_4run_34_frontbrakeassembly.gif








4.0L and 4.7L front disc brake assembly
toy_4run_frontbrakeassembly.gif



To Remove:


  1. Before servicing the vehicle, refer to the precautions in the beginning of
    this section.
  2. Remove or disconnect the following:

    • Front wheel
    • Clip, 2 caliper pins, the anti-rattle spring then remove the 2 brake pads
      and the 4 anti-squeal shims

To Install:

CAUTION
Only replace brake pads on 1 side of the
vehicle at a time. Failure to use this procedure could cause the caliper pistons
on the opposite side of the vehicle to pop out requiring the reconditioning or
replacement of the brake caliper.


  1. Remove a small amount of brake fluid from the master cylinder.
  2. Install a used brake pad into the caliper and compress the caliper pistons.
  3. Apply disc brake grease to both sides of the inner anti-squeal shims.
  4. Install or connect the following:

    • Anti-squeal shims to the new brake pads
      NOTE: When replacing worn pads, the anti-squeal shims must be replaced
      together with the pads.

    • 2 brake pads
    • Anti-rattle spring and the 2 caliper pins
    • Clip
    • Front wheel

  5. Depress the brake pedal several times to seat the brake pads.
  6. Check the brake fluid level and top off as needed.

Rear
To Remove:


  1. Before servicing the vehicle, refer to the precautions in the beginning of
    this section.
  2. Remove or disconnect the following:

    • Rear wheel






      toy_4run_rearcalbolts.gif



    • 2 cylinder slide pins from rear caliper assembly
    • Caliper assembly from rear caliper mounting
    • 2 brake pads with anti-squeal shims from rear caliper mounting
    • 2 anti-squeal shims from each disc brake pads
    • Pad wear indicator plate from the inner side disc brake pad
    • 4 pad support plates from the rear caliper mounting

To Install:


  1. Install or connect the following:

    • 4 pad support plates on the rear caliper mounting
    • Pad wear indicator plate on the inside brake pad
      Note: Install the pad wear indicator facing downward.

    • Anti-squeal shims on each brake pad
    • 2 disc brake pads with anti-squeal shims to the caliper assembly

  2. Apply lithium soap base glycol grease to the sliding part of 2 caliper slide
    pins.
  3. Install or connect the following:

    • Disc brake caliper assembly with 2 caliper slide pins
    • Torque to 65 ft-lbs (88 Nm)
    • Rear wheel

  4. Depress the brake pedal several times to seat the brake pads.
  5. Check the brake fluid level and top off as needed.
--- Removal & Installation
Front
To Remove:


  1. Before servicing the vehicle, refer to the precautions in the beginning of
    this section.
  2. Remove or disconnect the following:

    • Front wheel
    • Front brake caliper assembly

  3. Make matchmarks on the disc and the axle hub.
  4. Remove the front disc.

To Install:


  1. Align matchmarks and disc onto axle hub.
  2. Install or connect the following:

    • Front brake caliper assembly with the 2 bolts

      1. Torque to 90 ft-lbs (123 Nm)

    • Front wheel

Sep 23, 2010 | 2003 Toyota 4Runner

2 Answers

I have a 2002 Passat V6 Wagon and the brakes and rotors were replaced (aftermarket parts) about 3 months ago. The CV boots were replaced 2 weeks ago. When I apply the brakes, about 3/4 of the way down,...


Check and see if the Brake Pads were re-installed with all the hardware, ie, Anti-Rattle Clips, shims etc. if your pads are not secure in the Calipers it will cause the pads to rattle when you are driving in effect causing your brakes to make weird noises, ie, groaning, squealing, rattling.

Sep 08, 2010 | 2003 Volkswagen Passat

1 Answer

My 2005 Caravan had a squeal coming from the front pass. side. I was reasonably sure the brakes were about due to be changed. I had to wait till pay day, and since i had to put about a week and a half of...


Yes, You went to far. The squealing was a warning to get it looked at. The pads are designed that way to protect the rotors, If you scored the rotors you may now need to replace them also.

Jul 21, 2009 | 2005 Dodge Caravan

2 Answers

2005 Dodge Durango Front Brake Squeal


Did you buy factory pads or get cheap aftermarket pads? If aftermarket did you get the ceramic? The cheap aftermarket ones tend to squeal pretty bad. Like the last comment on here, you should have your rotors turned whenever you change the pads.

Jan 13, 2009 | 2005 Dodge Durango

Not finding what you are looking for?
Cars & Trucks Logo

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...