Question about 2002 Chevrolet Blazer

1 Answer

Needto replace rear wheel bearing 2002 chev s10 blazer

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 172 Answers

Remove the brake drum, remove the plate that holds the axle to the brake backing plate. The nuts are under the hub flange (where the wheel studs are), there is a hole in this flange to insert a socket on an extension. (you will need to rotate the hub flange to reach all four nuts.) After you get these nuts off, attach an axle puller (slide hammer) to the hub and pop the axle half-shaft out. Take this to a machine shop and have them press the old bearing off and press the new bearing on. Slide the half-shaft back in, and reinstall the nuts.

Might as well replace both bearings (left and right sides) while you are at it. Mark which side the axles come out of, often they are not interchangeable.

Sometimes you can rent or borrow the axle puller from a major chain auto store such as Checker or Auto Zone. They should be able to recommend a machine shop also, if they don't have the correct press.

Posted on Oct 04, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need help with purchasing a 2002 cherovlet blazer universal joint

take the old part into a bearing retailer shop and they will have a new one there
go google and type in--Hardie spicer "u"joint catalogue--- and then find chev blazer and get the part number there or buy on line
GM did not make "u" joints but used units made by bearing companies

Oct 05, 2016 | 2002 Chevrolet Malibu

1 Answer

Flat tow or dolly towing for an 2000 S10 Chevy Blazer

If you dolly it you put wear on the wheel bearings and ring and pinion in the differentials on the front or rear depending on what axle you raise.

Mar 14, 2015 | 2000 Chevrolet Blazer

1 Answer

2002 chev blazer 14600kms doesnt want to go into 4wdr all the time klunking and grinding then go,s in

Your need to have the gears synchronized, this is right out of the manual that came with your blazer. If your light blinks and does not go in 4HI and 4LO, then the gears are out of sync. And should not go into anything but 2HI. Some grinding can come from your CV joints or wheel bearings, You would only hear that when rolling though.

Feb 18, 2011 | 2000 Chevrolet Blazer

1 Answer

Where is the water solvent tank/pump for the rear window on the 2002 chev blazer?

Your Blazer has two pumps in the tank that you add washer fluid to. One is for the windshield and one for the rear window.

Sep 09, 2010 | 2002 Chevrolet Blazer

1 Answer

How many grease fitting are on a 2002 chev blazer, 4 wheel drive ?

Will very. Alot of the parts on the new cars are sealed and wont have grease fittings but when parts of steering and suspension are replaced then the have grease fitting so honestly it can very from car to car.

Feb 03, 2010 | 2002 Chevrolet Blazer

3 Answers

Where is the oil filter on a 2002 blazer

It is either next to the oil pan or under the hood near the wheel well on the right

Nov 05, 2009 | 2002 Chevrolet Blazer

3 Answers

Hub assembly and wheel bearings problem

Plan on spending more than $75 on this repair I am quite shore that that wont evan cover the parts. It definitely has a wheel bearing in the case of this vehicle it can only be replaced as an assembly that includes the hub. The ABS wheel speed senser is often sold as part of the assembly or in some cases is sold separately. good chance it will need to be replaced. Get the job done as soon as possible this is a very unsafe condition Your wheel will fall off while driving eventually if not repaired

Jan 06, 2009 | 2000 Chevrolet Blazer

Not finding what you are looking for?
2002 Chevrolet Blazer Logo

743 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides