Question about 2006 Ford Focus

1 Answer

Hello I was wondering where im supposed to put water in my car. there is a place where it seems like water is missing but i want to make sure.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 41 Answers

FIRST DON'T EVER PUT WATER INTO YOUR ENGINE OR ANY OF ITS COMPONENTS. What you looking at is the Coolant resivour and your low. buy some 50/50 prediluted coolant and fill to the COLD line if the engine is cold, HOT line if you just turned your car off. Also wait until your engine cools and check your Radiator to see if you have enough coolant. If not, fill coolant to the opening neck, SLOWLY squeeze the top radiator hose until the coolant starts to almost spill out. top off to the top of the neck again and run your engine for 15 minutes and then allow to cool and check the level again.

Posted on Oct 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to add water for toyota isis platana 2005?


in the plastic overflow tank is the only place anymore .

Apr 03, 2016 | Toyota Cars & Trucks

1 Answer

I have a 2000 vw jetta with 178000 miles, I just had a new radiator put in, now when I start my car sometimes, it will not turn on, the engine light comes on and when I check under the hood, my oil is low...


First, get under the hood and locate where the oil is coming from...that will be the place to start locating the problem. Is the oil filler cap in place or missing? Are all fluid levels where they are supposed to be? Is the vehicle running hot when you drive it?

Apr 27, 2017 | 2000 Volkswagen Jetta TDI

1 Answer

The hose branching from the main line coming off my radiator resevoir cracked and all my antifreeze/ coolant leaked onto the ground i have a new hose installed im just wondering how much antifreeze and...


Hello and welcome to FixYa!
A quart will be good. Please make sure that the fluid sits on the max level. Over filling it may lead to spilling which can cause the car to overheat.
Hope this helps and thank you for using FixYa! Have a good one!

Jul 25, 2011 | 1996 Volkswagen Golf

2 Answers

Engine miss firing installed new plugs still miss fires


You may get one bad spark plug in 50 years of driving

Does that answer your question?

You did not diagnose your problem, which
was a misfire.

Do you have codes PO301 thru PO306?

Ignition Coils cause misfires

Have to know the system your working on

Mar 18, 2011 | 2001 Mazda Tribute

1 Answer

Pier i took gooseneck off , no thermostat


Do you mean the thermostat was missing even though there was a recess for it, or do you mean there was no recess and wondering where else the thermostat is supposed to go?
If someone simply took the old one out, make sure you put the new one with the temp sensitive bulb facing the engine. Or else it would never get hot and open.
Why did you take it off?
Is the engine taking too long too warm up?

Jan 30, 2011 | 1996 Pontiac Sunfire

1 Answer

Suspenision


check the leveling valve& linkage, sorry don't know location. ner wheels for sure

Apr 25, 2010 | 2000 Lincoln Continental

1 Answer

I just rebuilt the automatic trans in my 95 mustang 5.0 because 3rd and averdrive would not work. i put it back together and now if you can get it to a speed that shift into those gears it works fine but i...


Yes it can But Im sure by the way you talk you know a lot of what you are doing,I sure you set that at inch pounds they said.Im think it is 72 in lbs,Im just wondering if a ball slip on you in the valve body.I hope this helps you

Sep 05, 2009 | 1995 Ford Mustang

1 Answer

87 olds Cutlass boiling back threw overflow. Put new thermostat, flushed radiator and engine. Water seems to be flowing threw radiator and fan also seems to be working fine. Cannot figure out why it is...


Hello there.....

First things first: Is the temperature gauge showing normal as it is supposed to be? No contamination of oil & water on withdrawing the oil dipstick? Head gasket not the culprit here? No excessive steam on idling from the exhaust system? If these signs are not present than I suppose there could be an air lock within the cooling system - bleed the system - check if the radiator/coolant reservoir cap is satisfactory. Top up the radiator (if possible) with mixture of water & antifreeze whilst the vehicle is idling. Hope this helps.

Good luck

Jun 25, 2009 | 1994 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
2006 Ford Focus Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...