Question about 1995 GMC Yukon

1 Answer

I have a 2002 Yukon Denali and I was wanted to know, how do u change the bulb in the steering wheel?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Steering Wheel Control Switch Assembly Replacement Removal Procedure

  1. Remove the steering wheel. Refer to Steering Wheel Replacement .
    I have a 2002 Yukon - 399638.gif
    tif.gif
  2. Remove the horn switch from the steering wheel.
    755486.gif

  3. Remove the steering wheel shroud retaining screws from the back of the steering wheel.
  4. Remove the steering wheel shroud fromI have a 2002 Yukon - 408596.gifing wheel.
    408596.gif
    tif.gif
  5. 780085.gif
    tif.gifDisconnect the steering wheel control switch (2) electrical connector (I have a 2002 Yukon - tif.gif />408598.gif
    tif.gif
  6. Remove the steering wheel control switch from the steering wheel.

Steering Wheel Replacement Tools Required J 1859-A Steering Wheel Puller
Removal Procedure
  1. Disable the supplemental inflatable restraint (SIR) system. Refer to Disabling the SIR System in SIR.
  2. Remove the inflator module. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.
  3. Remove the horn switch. Refer to Horn Switch Replacement - On Vehicle .
  4. Remove the steering wheel nut.
    374820.gif
    tif.gif
  5. Remove the steering wheel, using the J 1859-A .
Installation Procedure

Posted on Oct 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I drive 2002 yukon denali and was making a sharp turn when the front wheels lock. They wont turn, i finally got them to turn enough to back up out of the way. It looks like it has enough ps fluid


a broken CV or UJ on a drive shaft can cause the steering to lock up , jack up front end and check for damage to the drive shaft's rubber covers to the drive joints, push/pull wheels in and out , as in steering motion while spinning wheel and feel if there is anything restricting a smoth movement , hope this helps

Jun 26, 2016 | 2002 GMC Yukon Denali

1 Answer

2003 yukon xl denali cranks but won't start


i agree first check if you got a spark and check if fuel is actually being supplied

Mar 20, 2014 | 2003 GMC Yukon Denali

1 Answer

All but one light on my 2005 Yukon Denali steering wheel are out what could be the problem?


One possible area is the clock spring. This is a coiled ribbon wire, under the steering wheel, that allows the wheel to turn, and still have wires connected. Eventually the wire breaks at one point.

Jul 31, 2011 | 2005 GMC Yukon Denali

1 Answer

Steering wheel is locked up. engine doesn"t start.


Are you saying that you are able to turn the ignition key but the steering wheel doesn't unlock, and the engine doesn't crank or is it that the key won't turn? Either way you have something broken, probably the ignition lock cylinder. The steering wheel has to be removed, There are quite a few special tools you have to have, you have to disable the air bag. It's not something you want to do yourself if your not sure what your doing.

Jan 28, 2011 | 2002 GMC Yukon Denali

1 Answer

Want to reset the service engine light on a 2002 denali


OK, take an OBD-II scanner and press the erase codes button when connected to the OBD-II connector below the steering wheel under the dash board.

Jul 16, 2010 | 2002 GMC Yukon Denali

1 Answer

I have a 2002 Denali pickup with quad-steer and the steering wheel is very hard to turn to the right. I have switched to 2 steer and have the same problem. Could it be the steer box or the pwr steering...


it should have a pump is there any whining noise when steering if so ad power steering fluid and check for leaks your owners manual will tell you what fluid and the pump will be on the front side of engine

Apr 30, 2010 | 2002 GMC Yukon Denali

1 Answer

Rear wheel bearing is out, how easy to repair


not easy,you will probably need a hydraulic press to remove and reset the bearings

Apr 20, 2010 | 2002 GMC Yukon Denali

1 Answer

Change lisence plate lights


Look where the wires go to the lights underneath. Grab the white rubber piece that goes into the light housing and twist 1/4 turn. Then pull. The bulb just pushes into its terminal in the white rubber.

May 13, 2009 | 2002 GMC Yukon Denali

Not finding what you are looking for?
1995 GMC Yukon Logo

837 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...