Question about 1996 Chevrolet K1500

2 Answers

I have a 96 silverado the we switched from EFI 350 to a carb 454. We hooked it up with all the original accessories and plugged everything we could in. the problem is that everything is the truck works except for the ac blower fan and the ac clutch will not engage???? Whats the the problem??

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 69 Answers

Check you low pressure switch if not hooked up or faulty will not engage

Posted on Oct 04, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 327 Answers

I hope this will help you have 1 more i have to make it smaller to post herei have a 96 silverado the we switched from EFI 350 - 9cf18e4.jpgeff9eb1.jpg

Posted on Oct 04, 2010

  • 7 more comments 
  • dkrippa Oct 04, 2010

    right click on image save to your computer and print or zoom in to view larger please repost your question in a new post i have 1 more diagram for you i cant add it in this post

  • kapierce Oct 04, 2010

    ok i will repost it in a sec thank you

  • dkrippa Oct 04, 2010

    any other questions you have please post a comment to this post and i will get an email letting me know you replied and i will help you

  • kapierce Oct 04, 2010

    ok i did a repost do u see it

  • kapierce Oct 04, 2010

    i also downloaded the pics and they are to fuzzy to read if u even zoom in a little bit.

  • dkrippa Oct 04, 2010

    yes i see i dont know what else i could do is what what you need ? the diagrams ?

  • kapierce Oct 04, 2010

    yea the diagrams would help out a lot. Where are u getting the diagrams from, is it a website or are they on ur computer?

  • dkrippa Oct 04, 2010

    my computer . here is a hint to contact me 6 letter of alphabet there is an email program that starts with that letter .com drop me an email and ill email you back clear pdf files

  • dkrippa Oct 04, 2010

    my bad 7 th letter of alphabet

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 327 Answers

SOURCE: i have a 96 silverado the we switched from EFI 350

make sure you trace the grounds also

Posted on Oct 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ok I am wondering if my motor in my 91 gmc 5.7 l b8 is a vortec or a 350 it has throttle body carb and not sure thought if I could interchange it with an older 350 ..


Here, is what I think you are asking. The TBI intake from a 91 will fit the same size engine from 88 to 95. The Vortec didn't come out till 96 I believe. So if your 91 is the original engine then it is not a Vortec motor. If you want to swap your 5.7 with another 5.7 (5.7 = 350) Then the 88-95 should work, Just double check your sensors and locations as the plugs may be different and or in different locations. I know my 88 GMC and my 94 chevy (both K1500's) were a little different. Hope this helps.

Jan 17, 2015 | 1991 GMC Sierra

1 Answer

1989 chevy 44 engine swap


for a swap like that a chilton book would cover info for both motors and they cost under 20 bucks. just saying it beats the hell out of guessing at it or taking some schmucks advise from the internet. since your old 5.7 had TBI im hoping the 454 your swapping it with is also a TBI, if not your best bet would probally be to convert to carb but your going to need to replace the fuel system as the 2 high pressure lines that ran the TBI wont work with a carb. if it is TBI your going to need the ECM that came with the 454 as the 350 one is just going to "get confused" and have issues. Since your rig has an older ECM you can remove the Electronic senders and replace them with manual ones to simplify everything ( i have an 89 chevy i built a rat 355 for so ive been through this before) . without knowing exactly the year of the 454 thats about all i can think of to watch out for on that swap, i hope your not trying to mate the 454 to a 4L60, your going to need at least a 4l80 with an upgraded sun shell gear or a heavy duty manual ( at least 10 spline and 12 inch clutch).

Apr 29, 2012 | 1989 Chevrolet Suburban

1 Answer

Where are the gas filters on a 454 motor efi carb type on a C 3500 daully


The fuel filter should be located under the vehicle, driver side, below seating area, driver side of transmission, mounted on frame rail in fuel line. I hope this helps you and good luck.

Mar 26, 2011 | 1994 Chevrolet C3500

1 Answer

I have a 1995 Chevy 2500 6.5 turbo diesel and the blow. So I was wondering if theirs any gas engines that will bolt in its place? thanks D Hawkins


Any smallblock chevy to a bigblock chevy will bolt up. examples I would go with : 350 or a 454 . The 6.5 uses the same transmission bolt pattern as these engines. If it's an automatic the flywhell might still work on the 350 or 454.

Aug 04, 2010 | 1995 Chevrolet Silverado 2500

2 Answers

Replaced TBI with Carburator, 4L80E wont shift


all u need to do is get a holley electric choke carb model i think is 4150 or 4160 and get the tps sensor adapter for it it is around $110 and the carb is around $290 ur trans shifts off of the tps. all the other sensors are useless. i had that same problem with my 94 silverado.

Nov 10, 2009 | 1991 GMC Suburban

2 Answers

96 f350 diesel stops after warm like key turned off.


Sounds like your fuel shut off solinoid is getting hot its failing and needs to be replaced,I hope this helps you

Sep 30, 2009 | 1996 Ford F350 Crew Cab

1 Answer

1988 454 efi timing and fuel prob??


could be that your distributor is out a tooth

Apr 15, 2009 | 2001 Daewoo Lanos

1 Answer

Need a diagram 87 chevy


I know from Experience on Rebuilding my Chevelle www.PainlessWiring.com has everything that you need for this Conversion.

Jan 04, 2009 | 1988 Chevrolet K1500

2 Answers

95 Chevy Silverado.


To bypass the other switches, run a wire from the battery to the starter bendix and if it cranks then the problem is in the wiring or the switches you mention.

Jun 28, 2008 | 1995 Chevrolet Silverado 2500

Not finding what you are looking for?
1996 Chevrolet K1500 Logo

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...