Question about 2001 Mercedes-Benz C-Class

1 Answer

The car will turn over and some times it wil start and some times it just turns overI and will not start.It has been to the dealer and they did not find what was wrong. The seat seems to work after he set it manualy and now works automatically.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Mercedes-Benz Expert
  • 166 Answers

If the car starts and runs fine when you first start it in the morning or when its cold from sitting for a few hours after driving it but won't start if you drive it somewhere and get the car upto operating temp and then shut the car off and try to restart it with a few mins or upto a half hour basically when the car is hot then you might be looking at a bad crankshaft position sensor. A bad crankshaft position sensor can keep the car from starting mostly when its hot. If the engine control module doesn't see that signal it doesn't know the engine is running so it never sends fuel to the injectors.

Posted on Oct 04, 2010

  • Donald Cabansag Jan 23, 2011

    that diagnosis is correct. we run into that problem all the time in the mercedes dealerships.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't get the brakes to bleed


Do you have someone slowly pressing on brake
pedal,as you open the bleeder valve & close before
the pedal reaches the floor & repeat 8 times or so

You never pump brakes when driving or bleeding

Do not let the master run dry or you start over

I never had that issue in 48 years & I have no special
abilities

Oct 03, 2012 | 2002 Chevrolet Silverado 1500

1 Answer

Loud knocking


Sort of sounds like the timing belt broke-- if you have one

The valves may have hit the pistons & that is why it won't turn over

I don't know any of that is true & won't wish it on anyone,but
it is a place to start

Sep 13, 2012 | 2001 Saab 9-3

1 Answer

Car will not start. its getting upower but no start. if i put the car in neutral then back to park it would start but this time it will not. please help...


when you turn your key on watch for the O/D light on the dash if you turn your key to fast it wil flash and car wont start, also if you hit the button the same thing could happen.

Sep 02, 2011 | 1993 Nissan Altima

3 Answers

Steering wheel wont unlock and key wont turn, tried turnin key and steering wheel, Am I supposed to have someone turn key while I shake the actual wheel? thxs, jon


They do stick from time to time, check the key is not bent. also adjust the hieight of the steering wheel. if you have parked it with the wheels turned in or out then you need to return it to the position faceing the way the wheels do. it can feel very stiff but have a go should do it, careful with the key. if you can get someone to help then do.

Always park your wheels straight!!!

Jan 13, 2010 | 1999 Jeep Grand Cherokee

1 Answer

2003 ford F250 6.0 deisel..it will crank but will not start,cam and crank wil not synchronize..both are new. oil gauge wil not show pressure while cranking RPM.is around 48 rpms on a scan tool...


I HAVE A 7.3 DEISEL AND I DONT KNOW IF THE 6.0 HAS ONE OR NOT BUT MY CRANK SHAFT SENSOR WENT BAD AND THE TRUCK WOULD NOT START( JUST TURN OVER ) DEALER PUT NEW CRANK SHAFT SENSOR ON MINE AND FIXED THE PROBLEM...HOPE THIS HELPS...

Nov 29, 2009 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

'05 Chevy Malibu Wil Not Start


is the security light blinking on the dash? If so you need to rreprogram the key to the anti theft module. to do this, turn key to on...let sit for about 10 min or so until the security light flashes. turn key off.. count o 5. vehicle should start. if not then it will have to go to the dealer to have it specifically reprogrammed as the PCM and anti theft modules both no longer reconize the key code.

Aug 24, 2009 | 2005 Chevrolet Malibu

Not finding what you are looking for?
2001 Mercedes-Benz C-Class Logo

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...