Question about Volvo 850

1 Answer

Windsheild wiper does not remain in contact for the full stroke.The blade actually raises off the windsheild.1995 volvo wagon. three sets of blades, two sets replaced by mechanics.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 395 Answers

Try this:

With ignition on, turn on wiper switch. When wiper arm gets to point where blade does not touch screen, turn off ignition switch so that wipers do not return to park position. It may take a few goes to stop arm in the right position so repeat process until it is in the best position.

Check main wiper arm and bend slightly towards windscreen so that blade touches screen and there is some spring pressure from the arm to keep blade on screen. Also check that there is no interference between main arm and the section which supports the rubber blade. If you get blade chatter as the arm sweeps, twist the end of the main arm slightly in the opposite direction to the movement that produces the chatter. It may take a bit of trial and error to get it all right.

Posted on Oct 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiper blade not making contact upper 1/3 of sweep-drivers side


Your wiper arm is worn out. You need to buy a new one. Make sure you get a Volvo OEM replacement as the after market ones are junk. The springs wear out after a while resulting in loss of contact with the windshield.

Sep 01, 2012 | 1996 Volvo 850

1 Answer

How to take off the rear windsheild wiper on a 94 grand cherokee


You will need a 13-inch wiper blade for the rear window. 1 - When removing the wiper blade lift the wiper arm away from the window. ----- 2 - With one hand holding the wiper arm press the small tab on the underside of the wiper blade where it meets the wiper arm. ----- 3 - Slide the wiper blade off of the arm by pulling the center toward the bottom of the arm.----- 4 - Lightly lay the wiper arm on the window.----- 5 - Prepare your new wiper blade by taking the curved part of the plastic clip and line it up with the curve of your wiper arm. ----- 6 - Lift the wiper arm and press it through the center of the wiper blade up and over the plastic clip. 7 - Pull the wiper blade up until it clicks. Place the arm back on the window.

Jan 11, 2012 | 1994 Jeep Grand Cherokee

2 Answers

How do you change the wiper blades on this car...acura cl????


most folks would read the owners manual, or the instructions on the back of the new wiper blade pacakge. rewriting those instructions, without the illustrations, here would accomplish what?

take the car to autozone or advance and let one of their guys sell you a set and put them on for you.

Jan 21, 2011 | Acura CL Cars & Trucks

1 Answer

How do I replace wiper blades


First, pull on the wiper arm until it raises and locks into the service position. The wiper arm will stand by itself once you raise it past a certain point.
Then find the clip on the underside of the wiper arm (rotate the blade slightly to get to it.
Press the clip in while simultaneously pulling the old wiper blade off the wiper arm. You can then discard the old blade.
Align the new wiper blade with the wiper arm track. Slide it along the track until you hear it click.
Repeat this process with the other wiper blade to complete the replacement of wiper blades on your Highlander.
Return the wiper arms to their normal position against the windshield. Done!

Dec 05, 2010 | 2005 Toyota Highlander

1 Answer

How do I get the old wipers off my hyundai 2000 elantra wagon and put on new armour all wiper blades?


The old wiper blade assembly can be pushed out of the end of the wiper arm. Depending on the blade, you may need to use a screwdriver to depress a locking tab on the blade assembly. The new wiper blade snaps into place on the end of the wiper arm. Also, your new wiper blades usually come with diagrams/instructions. Check them.

Jan 23, 2010 | 2000 Hyundai Elantra

1 Answer

Wiper blade problems


nicksworld hopefully is correct, nice and simple. otherwise go to wiper linkage.

but i hope that nic is correct

hope2help shack

Apr 06, 2009 | 1995 Honda Accord

1 Answer

Location of wind sheild wiper motor on volvo 940


Behind hood is the cawl three ten millimeter bolts hold it in place two on the sides and one in the center about an inch down the fire wall motor is under there.

Feb 07, 2009 | 1994 Volvo 940

2 Answers

Headlight wiper


They shouldn't - they only work when you do a wash/wipe.

Oct 01, 2008 | 2000 Volvo S40

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...